New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Focke Wulf FW-190A Balsa 0,46 grootte GP / EP 1500mm (ARF)

Focke Wulf FW-190A Balsa 0,46 grootte GP / EP 1500mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Gewicht:
6196 g
SKU:
341000071-0
WANT FREE SHIPPING? Click here to find out more!

Het zou eerlijk zijn om te zeggen dat de Focke Wulf FW-190 kwam als een schok voor geallieerde piloten bij de invoering ervan in dienst in augustus 1941; inderdaad, British ace Douglas Bader schreef zo ​​veel in zijn boek "Strijd voor de Hemel."

Zwaar bewapend met 4 x 20 mm kanonnen en 2 x 13mm machinegeweren, de "Vogel van de Slager" als de FW-190A bekend was, leverde een enorme stoot bedoeld is in de bezienswaardigheden en overklast de Spitfire Vb (de belangrijkste Britse gevechtsvliegtuigen op dat moment ) in alle gebieden, behalve draaicirkel op hoogtes onder 20.000 ft.

Met een topsnelheid van 408 mph op 19,400ft en een tarief van klim van bijna 3,000ft / min de FW-190A handhaafde haar superioriteit over geallieerde strijders tot de invoering van de Spitfire Mk IX met zijn krachtigere Merlin 61 motor en 2-traps supercharger herstelde het evenwicht in de zomer van 1942.
De FW-190 zag actie aan het Oostfront van eind 1942, waar hij vond genade met zijn piloten die het gebruikt in zowel de vechter en grondaanval rollen.

Onze "Vogel van de Slager" komt bijna klaar om te vliegen met slechts eindassemblage en de installatie van apparatuur die nodig is. De all balsa casco is sterk genoeg om een ​​nitromotor nemen, maar is licht genoeg voor elektrische conversie. Robuuste vaste staart dragger landingsgestel is zeer geschikt voor ruiger grasvelden, ook al is het een eenvoudige taak om een ​​set trekt toe te voegen. Dit model wordt geleverd met een zeer complete hardware pakket inclusief stuurstangen, controle hoorns, brandstoftank, motorsteun, en zelfs een plastic spinner.

Om toe te voegen aan de schaal realisme, de bekleding is een multi-kleuren plastic film, semi matte finish met gedrukte panel lijn, klinknagel details en zelfs realistische weersinvloeden effecten toegepast! Een ruime, pre-geschilderde fiberglas kap wordt geleverd om af deze geweldige uitziende sport / maquette en een grote, maar goed vermomd toegangsluik maakt een snelle batterij veranderingen in tussen sorties.

Het vliegen van de FW-190 is een plezier, dankzij zijn lichte vleugel laad- en verfijnd vleugel sectie die is ontwikkeld om milder kraam kenmerken die vaak wordt gevonden met schaal warbirds geven en maken het een eenvoudige klus te laten vallen in een reeks trekt om het schoon voor sommige adrenaline laag en snel beschietingen loopt, omhoog te trekken in een overwinning rol aan het einde van het veld.

Kenmerken:
• Almost Ready to Fly - Compleet eindmontage, installeren uw keuze van elektronica en energie systeem
• Lichtgewicht balsa en multiplex constructie
• Inclusief fixed gear, intrekken klaar
• Zeer gedetailleerde gedrukt multi-color bedekking
• Magnetische doorgeefluik voor de brandstoftank of de toegang batterij
• Pre-geschilderde fiberglas kap
• Volledig hardware pakket bevat spinner

specs:
Spanwijdte: 1500mm
Lengte: 1090mm
Flying Gewicht: 2700g

vereist:
4/5 kanaals zender en ontvanger
0,46 Tweetakt / 0,70 viertaktmotor of 0,46 Equiv
5 x Standard Servo
Ontvanger accu (gloed)
800W motor / ESC / batterij (elektrisch)
Electric trekt

  • Sku 341000071-0
  • Brand Other
  • Gewicht ( g) 6196.00
  • Lengte 1020.00
  • Breedte 205.00
  • Hoogte 415.00
  • IC / 2 : Elec -
  • Motorsize ( diam - of - cc ) -
  • Spanwijdte ( mm ) 1500.00
  • Length(mm) -
  • SaleWeight ( g) -
  • Capaciteit ( mAh ) -
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have had this kit (although its an ARF it needs quite a bit of work before it can fly) for a few weeks and am well into the setup. Initial impressions are really good - very well and strongly made (if a bit heavy) with printed plastic covering. The pilot and cockpit are excellent. It comes with a comprehensive set of a accessories - all the pushrods, hinges, servo mounts etc. I am doing mine electric and I reckon all up weight will be about 2.7kg (I weighed all the components). It took a while to get retracts that will fit but have eventually settled on electric retracts with a socket for 5mm pins and have cut down the supplied fixed u/c legs and put a tube sleeve around the end that fits in the retract as the wire is 4mm diameter. I also hope to install a hobby king sound system in this plane. The battery bay is big enough for a 5s 3000mAh battery but not my 5000mAh ones so I hope flight duration will not be a problem. I will add to this review once it flies.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had this kit (although its an ARF it needs quite a bit of work before it can fly) for a few weeks and am well into the setup. Initial impressions are really good - very well and strongly made (if a bit heavy) with printed plastic covering. The pilot and cockpit are excellent. It comes with a comprehensive set of a accessories - all the pushrods, hinges, servo mounts etc. I am doing mine electric and I reckon all up weight will be about 2.7kg (I weighed all the components). It took a while to get retracts that will fit but have eventually settled on electric retracts with a socket for 5mm pins and have cut down the supplied fixed u/c legs and put a tube sleeve around the end that fits in the retract as the wire is 4mm diameter. I also hope to install a hobby king sound system in this plane. The battery bay is big enough for a 5s 3000mAh battery but not my 5000mAh ones so I hope flight duration will not be a problem. I will add to this review once it flies.

I am starting this thread because I just received my FW-190.
Good packaging arrived in one piece.
Model is covered in some plastic covering (I think its called KH Misticker). Mat finish and beautifully detailed.
I am planning to put EVO10 gas on this model. I used EVO10 engine on WorldModels FW190 and it works perfectly.

Over the course of several weeks I will continue to post pics and finally video...stay tuned

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am starting this thread because I just received my FW-190.
Good packaging arrived in one piece.
Model is covered in some plastic covering (I think its called KH Misticker). Mat finish and beautifully detailed.
I am planning to put EVO10 gas on this model. I used EVO10 engine on WorldModels FW190 and it works perfectly.

Over the course of several weeks I will continue to post pics and finally video...stay tuned

OK ... kit arrived in very good condition ... double boxed. Its the VQ FW kit.
All goes together well ... BUT - the firewall marks are difficult to find, and motor mount once fitted as per instructions - shaft end is out of centre. The mount needs to be moved a small amount more to left so that right thrust angle puts shaft end at centre.
Cowl does not slide over fuselage end and only butts up to it.
Fixed wheel blocks are laminated from multiple ply sheets and these split apart when landing or any shock. The L of the landing gear then impacts wing top sheeting.
The wing is non-scale as most of the aircraft but overall it looks the part in the air. The photo of her gives impression of a semi gloss finish but in fact she is much better looking in reality.
The covering film is not like normal film - it is more self-adhesive and thicker. They give you A4 sheets of each colour as spare repair film if needed.

I have fitted an OS 70FL 4str and this powers the model excellently, along with 12x6 prop. Balance is spot on with this.
I am now awaiting the retracts to replace the fixed gear. I chose the plain retract units shown in accs. links and will use the fixed gear in them with top L cut of.

For anyone who wants a FW190 and not too worried about scale accuracy - this is a good model.

See my youtube channel 'solentlifeuk' for video.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OK ... kit arrived in very good condition ... double boxed. Its the VQ FW kit.
All goes together well ... BUT - the firewall marks are difficult to find, and motor mount once fitted as per instructions - shaft end is out of centre. The mount needs to be moved a small amount more to left so that right thrust angle puts shaft end at centre.
Cowl does not slide over fuselage end and only butts up to it.
Fixed wheel blocks are laminated from multiple ply sheets and these split apart when landing or any shock. The L of the landing gear then impacts wing top sheeting.
The wing is non-scale as most of the aircraft but overall it looks the part in the air. The photo of her gives impression of a semi gloss finish but in fact she is much better looking in reality.
The covering film is not like normal film - it is more self-adhesive and thicker. They give you A4 sheets of each colour as spare repair film if needed.

I have fitted an OS 70FL 4str and this powers the model excellently, along with 12x6 prop. Balance is spot on with this.
I am now awaiting the retracts to replace the fixed gear. I chose the plain retract units shown in accs. links and will use the fixed gear in them with top L cut of.

For anyone who wants a FW190 and not too worried about scale accuracy - this is a good model.

See my youtube channel 'solentlifeuk' for video.

I ordered one, the aircraft is well done and i like the colors and the age effect on the wing skin. The push pull rods are metallic so too havy for my point of view. I think i will replace them with a plastic cable to save same weith.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered one, the aircraft is well done and i like the colors and the age effect on the wing skin. The push pull rods are metallic so too havy for my point of view. I think i will replace them with a plastic cable to save same weith.

My FW-190 came well packed & protected. Weight of all parts in the box totals 2.270g. The hardware pack and push roads alone put 760g on the scale. It might be possible to save some weight here later while putting the model together.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My FW-190 came well packed & protected. Weight of all parts in the box totals 2.270g. The hardware pack and push roads alone put 760g on the scale. It might be possible to save some weight here later while putting the model together.

Very nice all wood constructing even fuselage is round like the original. Plane is stand off scale, but one of the best flying FW-190's I have ever owned. Flying with a 4250-750 brushless motor 14x7 APC e prop and 5000 4 cell Hobby King Zippy pack lipo. 9 minute flights depending on throttle management. Installed retracts had to modified the battery opening a little for the larger pack. Same VQ model FW-190 from a few years back see Model Airplane new reviews. http://www.modelairplanenews.com/blog/2012/12/12/vq-models-focke-wulf-fw-190-video/

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice all wood constructing even fuselage is round like the original. Plane is stand off scale, but one of the best flying FW-190's I have ever owned. Flying with a 4250-750 brushless motor 14x7 APC e prop and 5000 4 cell Hobby King Zippy pack lipo. 9 minute flights depending on throttle management. Installed retracts had to modified the battery opening a little for the larger pack. Same VQ model FW-190 from a few years back see Model Airplane new reviews. http://www.modelairplanenews.com/blog/2012/12/12/vq-models-focke-wulf-fw-190-video/

Just received the plane and it is a great looking bird with many nice details. Much better looking than shown on the pictures here, Fantastic value for the money, even when you add the shipping cost. It is a VQ model and has a very good manual. All parts like motor mount are top quality. I bought the servoless retracts with shock absorbing oleo legs - fits very well. Came with 4 guns but only one is needed to fit on top of cowling - not shown on the pictures here. I am sure it will fly very well - only pity it does not have flaps

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the plane and it is a great looking bird with many nice details. Much better looking than shown on the pictures here, Fantastic value for the money, even when you add the shipping cost. It is a VQ model and has a very good manual. All parts like motor mount are top quality. I bought the servoless retracts with shock absorbing oleo legs - fits very well. Came with 4 guns but only one is needed to fit on top of cowling - not shown on the pictures here. I am sure it will fly very well - only pity it does not have flaps

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save