Registreren

Product Finder

Instellingen

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
Registreren

HobbyKing Red Brick 200A ESC (Opto)

HobbyKing Red Brick 200A ESC (Opto)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
138 g
SKU:
RB200A
Product
Omschrijving

De HobbyKing Red Brick ESC s wont eerste plaats te winnen voor stijl, hoewel ze top punten zal duren voor eenvoud en betrouwbaarheid. Met een basisset van de programmering kenmerkt deze ESC s zijn een perfecte oplossing voor iedereen die op zoek naar een eenvoudige maar robuuste snelheidsregelaar.

The Red Brick ESC s zijn ontworpen met warmteafvoer in het achterhoofd. met extra grote aluminium heatsinks de Red Brick ESC s zijn iets groter dan vele ESC s in hun klasse, maar dit compromis in omvang is gericht op het helpen om de problemen in verband met oververhitting te voorkomen.

Specs.
Max Amps: 200A
UBEC: Nil
Cellen: 2 ~ 7s LiPoly
Maat: 80mm x 23mm 39mm
Gewicht: 108g (Inc Wires)

Gebruikers handleiding meegeleverd.

Product
Specifications

Aanvullende Informatie

  • Sku:
    RB200A
  • Brand:
    Nvt
  • Capaciteit ( mAh )
    Nee
  • Gewicht ( g)
    138.00
  • Lengte:
    180.00
  • Breedte:
    28.00
  • Hoogte
    80.00
Community
Discussions
Rate&
Review

Schrijf je eigen recensie

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This ESC has excellent pickup at low speed for those with "inertial" applications (*cough* rideable things).

I do an in-depth engineering study on these and other "200a" class Hobbyking ESCs. Just google "One Thousand Hobbyking Amps", without the quotes, and enjoy.

This product uses the P0603BDL fets which are rated to 25 volts. A small amount of overhead on their breakdown voltage means they can run up to 7S lipos, but not any more. 8S will likely cause breakdown and destruction very quickly.

I'm rating quality 4 because the heat sink on it came very close to touching the output wires - which would have certainly caused a short circuit burnout over time. In my application I use forced-air cooling with no heat sink, and it works fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
so simple plug and play massive 200A rating. used on hk pitts special
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought 5 and only burn one, not buy running it on a brushless, it was when I programmed it! Use a 2S Lipo in the programmation mode, or a standard lipo if you know where you're going. The ESC comes hot quickly and you will hear some "pop"



I used them on 2000 -3000 watts setup on 6S (100 to 135 amps). No problem, no overheating. The brake fonction works well, but it could be better.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Otimo produto! Recomendo a compra!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Please take not ,spec says 2-7s WRONG , it handle ONLY 6S .Take note of it ,because HK is investgating .One crown because it cant do 7s other wis it,s great on 6S .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hope it will performe better then first impression. The Heat sink is very close to the 3 motor poles (where the motor cables is soldered to the ESC) also the ESC gets very hot while programming. Not good.



Is there any programming cards that can be used with this ESC?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
-great product, recommended!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
With a Scorpion 4020 1100 Kv motor on 6s LiPo.

Modified it with a extra heat sink, works great for the money :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1st) I had to repositioning the heat sink, else there where a schort circuit between the motor connections

2nd) while the programming the ESC becomes so hot that the ( ) wire desoldered itself.

This effected a short circuit on the board and a flame. I resoldered the ( ) wire and tryed again, but the same effect... cut of power to prevent worse things...

This ESC is a lowest quality produckt and should not be sold!!!

IT'S DANGEROUS, BEWARE TO BY THIS!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I installed it in a Funjet Ultra, tested it on 6s with ARC 36-65-1 2080kv, did my set up everything works well up to know. Will be flying it this week end.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual download now [80kb]
No File Name download now [19kb]

Productlabels

Gebruik spaties om verschillende labels te scheiden. Gebruik enkele aanhalingstekens (') voor zinnen.