NTM Prop Drive Series 35-36B 1400Kv / 495W

• Overall
• Quality
• Value

Customer Rated

Feb 17, 2012

Parkzone trojan turnigy trust 55a speed control,turnigy 2200 6 cell,
9x6 apc prop and you get turbo trojan

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 09, 2011

very good, you can safely recommend

• Overall
• Quality
• Value

Customer Rated

Oct 17, 2011

I will use 3s2200mhA Battery and 60A ESC !
Which folding prop can I use for this motor for good performance!?

• Overall
• Quality
• Value

Customer Rated

Oct 17, 2011

Shaft needs to have a flat notch for set screws.

Prop adapter needs to be included, but not type they sell seperately. It does not have standard mount. They need to have the standard mount you find on Power 15 - 32 motors. The shaft should be 4mm instead of 3mm. Hard to find a 10x8 - 12x10 prop with only a 3mm opening.



OTHER than that, it is a power horse motor.

Have it in a big Apprentice Foamie and boy does she rip up the sky......

Gotta keep an eye on power or she launches to the moon.



Nice motor.

By the way, it works fine with the Trust 55A ESC and the Yellow 6 Channel Spectrum receiver with extra antenna from HK

• Overall
• Quality
• Value

Certified Buyer Rated

Sep 08, 2011

todavia no lo probe pero parece de muy buena calidad yo lo recomiendo

• Overall
• Quality
• Value

Customer Rated

Sep 08, 2011

Perfect motor for a wing type airplane I just got mine today and figured out that the motor mount I got in hobby king does not fit this motor if fits other ntm prop drive motors but not this one it doesn't have mounting holes on the other side without the cables on it and the one on the side with the cables the mounting holes are all weird I don't think it iwll work with the mounting for the motor either

• Overall
• Quality
• Value

Certified Buyer Rated

Jul 19, 2011

This motor puts the OOOOH in smooth.

The only complaint would be that the mounting holes are drilled too big before tapping. They are supposed to be M3 but the screws are loose.

I am running this with a 3S Zippy and 55A Hobbyking ESC. 8x6E prop works well, larger prop (perhaps up to 10x) should also work.

• Overall
• Quality
• Value

Customer Rated

Jun 25, 2011

Great motor. I have an 8x8 APC electric prop and it does really well. At full throttle I have 48 amps. I do wish they would just include the accessory pack though.

• Overall
• Quality
• Value

Customer Rated

Jun 21, 2011

This motor functions stupendously. You test carried out with Watts Up, battery TGY 4000.3s.20c, propeller APC 10x5E, regulating Plush 40A.
Ap 56,84-640wp2kg push static. Q
Push to 40A1,650kg.
Push to 32A-. - 1,400kg.
The runnings seem quite smooth. It is reversible being been able to mount of two different ways.
I have that to say also that the regulating one Plush 40A functions stupendously, resisting the peak of energy of 56.84A during 3 seconds.
A great ideal motor for airplanes 3D from among 1 and 1,3kg.
Cordial greetings.

• Overall
• Quality
• Value

Customer Rated

Jun 13, 2011

First 2 flight of this motor went very good. I've put it in a Elipsoid Evolution 2,8m glider with a 9x5 CAM folding prop. On Turnigy 3S 20C it gave me peak power of 305Watts at ca. 30Amps. More than enough for this 1,6kg glider. Very good product yet again!

Regards