Totale prijs

€ 0,00

Winkelmand 0 Winkelmand 0 Loading...

Turnigy 2610 EDF Outrunner 4000kv voor 55 / 64mm

Generating Links

Turnigy 2610 EDF Outrunner 4000kv voor 55 / 64mm

Prijs:

Now save bespaar € 0,00 € 0,00

€ 12,88
Al gekocht Discontinued Product

Please continue searching for a similar product.
SKU:
T26101C4000
Geen verzendkosten? Klik hier meer leren!
Turnigy 2610 EDF Outrunner 4000kv voor 55 / 64mm
specs:
kV 4000
Afmetingen: 47 x 26mm
Shaft: 2.3 / 3.0mm
Voltage: 11.1V
Gewicht: 54g
No-load stroom: 1.4A
No-load RPM: 44.440
Laad stroom: 22.7A
Load RPM: 34.480
Thrust: 560g
Montagegaten Bolt Circle: 18mm
Mtg. Hole Number & Grootte: 4 x M2.5
 
Inclusief 2 assen, 2.3 en 3.0mm
  • Kv ( tpm / v ) 4000.00
  • Max Currents (A ) 22.70
  • Resistance ( mh ) 0.00
  • Max Voltage ( V ) 11.00
  • Vermogen ( W) 0.00
  • Shaft A ( mm ) 3.00
  • Lengte B ( mm ) 47.00
  • Can Diameter C ( mm ) 26.00
  • Kan Lengte D ( mm ) 13.00
  • Totale lengte E ( mm ) 60.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Upload video

Registreer u om video's te uploaden aanmelden of registreren

Onderwerpen
Sorteer op
Meest recente onderwerpen
* Bijnaam:

* Uw antwoord:


Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
annuleer
Bevestig
Plaats een nieuw onderwerp
* Bijnaam:

* Uw onderwerp:



Voer de tekst in de afbeelding in het onderstaande veld in
*Verificatie code:
Onderwerp plaatsen

Registreer u om beoordelingen te schrijven aanmelden of registreren

othmar | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 31, 2015

I used it with teh EDF 7 Blade 51 mm. The EDF needs some adjusments. The combo itself is "roaring".

Napstr | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 11, 2012

Nicely finished and leightweight motor - kv is accurate and motor is very light but powerful - great for those edf models

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Dec 19, 2010

This motor coupled with the HK 64mm EDF is perfect!

BEAflyer | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

Dec 08, 2010

Type your review here.
I use this in a pusher configuration with a 4-3 prop and 3 cell in a VQ Delta Rocket plane. It goes straight up it so must be over 150 watts WOT.

The motor does not get hot. Its is hanging out in the airstream. I used a Rhino 1350 30C. The prop speed is almost 100mph. The plane seems to fly about 80.

This is a pretty powerful motor for its size, and swings the 4-3 with ease on 3 cells.

Goofa | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 19, 2010

Don't get caught with the mounting of these units,the one I received has 2.5 mounting holes, very fustrating, This is a size I find hard to get,HK QA is pathetic.!

Derku | Geverifieerde koper

  • Quality
  • Value
  • Overall

Customer Rated

May 12, 2010

Combined with blue EDF 64mm sold here gives:



21.5 amps 515g with 2200 3s1p20c battery.



Ran it WOT 30 seconds static on a 22 degree celcius day and it was warm to touch after turning it off for 10 seconds. Not bad at all - also motor weighs 53g and combined with the EDF set is about 77 - 82g depending on your impeller.

red_81 | Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 27, 2010

I use this motor in my boat. Cooling solution is a must. Very good.

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 17, 2010

light fast and very strong edf works well on 6 and 7 blade

| Geverifieerde koper

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 10, 2010

windings look nice and tight and have epoxy to keep them in place.will test in fan later

Upload bestand

Registreer om bestanden te uploaden.
Alstublieft aanmelden of registreren om nu hobbyisten te helpen!