New Items Forum
Registreren

Total Price

€ 0,00

Winkelwagen 0 Winkelwagen 0 Loading...

Turnigy Smart6 80w 7A Balance Charger met Graph Screen

Turnigy Smart6 80w 7A Balance Charger met Graph Screen

Discontinued Product

Please continue searching for a similar product.
SKU:
Turnig-X6
WANT FREE SHIPPING? Click here to find out more!

De Turnigy Smart6 zal zich bezighouden met LiPo / levensduur tot 6S en NiMH / NiCd tot 17S met een lading snelheid tot 7A. De Smart6 biedt ook unieke functies meestal te vinden in veel duurdere apparatuur. Het LCD-scherm toont een amps / volt grafiek gedurende de laad / ontlaad proces waardoor u eenvoudig te lezen, realtime data. Ook getoond zijn individuele spanning cel tijdens het laden met realtime updates gedurende de laadcyclus. Er is ook weerstand display voor het controleren van de conditie / prestaties van uw verpakkingen, niet meer giswerk!

Kenmerken;
Charge / Discharge paremeters Graph Weergave
Instelbare cut-off voor het laden / ontladen functies
Meet de interne weerstand van de batterij voor perfromance controle
microprocessor gestuurde
Delta-peak gevoeligheid (NiMH / NiCd)
Individuele cel balancing
Li-ion, LiPo en LiFe staat
Ni-Cd en NiMH die in staat
7A Max laadstroom
Store-functie, maakt het mogelijk veilige opslag huidige
Termijn functie
Ingangsspanning monitoring. (Beschermt de accu's op het veld)
Data-opslag (Store 10 verpakkingen in het geheugen)
Batterij pauze in en fietsen.

Spec.
Input Voltage: 10 ~ 18v
Circuit vermogen: Max Charge: 80W / Max Discharge: 5W
Laad Current Range: 0.1 ~ 7.0A
Kwijting huidige assortiment: 0.1 ~ 1.5A
Ni-MH / NiCd cellen: 1 ~ 17
Li-ion / Poly cellen: 1 ~ 6
Pb accuspanning: 2 ~ 20V
Gewicht: 255g
Afmetingen: 135x80x25mm

Deze lader heeft een ingebouwde JST-XH evenwicht poorten, waardoor het compatibel is met Flightmax, Turnigy, Rhino en geen verpakking met een JST-XH-adapter maakt.

  • Sku Turnig-X6
  • Brand -
  • Capaciteit ( mAh ) -
  • Gewicht 505.0000
  • Lengte 165.00
  • Packaging Width 60.00
  • Hoogte 130.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This the worst charger, it has many firmware bugs and none technical support form HK to solve my problem.
So really do not recommend you to buy it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This the worst charger, it has many firmware bugs and none technical support form HK to solve my problem.
So really do not recommend you to buy it!

I'm very pleased with this product. Charges my 3S batteries up to 4.20v per cell without any issues. I like the stat and graph screens that show charging progress. I use this with a RadioShack 13.8VDC 19A Power Supply and it works great. You might have to make cables to match your batteries, but it uses banana plugs so it's easy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm very pleased with this product. Charges my 3S batteries up to 4.20v per cell without any issues. I like the stat and graph screens that show charging progress. I use this with a RadioShack 13.8VDC 19A Power Supply and it works great. You might have to make cables to match your batteries, but it uses banana plugs so it's easy.

The frimware have many bugs, if you are using for Lipo, Lion and Life ok, but when yuo try to use it with NiMH or Nicd, forget the firmware get crazy and creat many error info on the display.
I really do not recommend.!!!
I try to get any FW update but HK didn't support me on that... so Now have a garbage on my lab.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The frimware have many bugs, if you are using for Lipo, Lion and Life ok, but when yuo try to use it with NiMH or Nicd, forget the firmware get crazy and creat many error info on the display.
I really do not recommend.!!!
I try to get any FW update but HK didn't support me on that... so Now have a garbage on my lab.

Charge function seems to work well but the unit I got did not discharge. Got an RMA to return it for a replacement so I'll update the review if the new one works as it should.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Charge function seems to work well but the unit I got did not discharge. Got an RMA to return it for a replacement so I'll update the review if the new one works as it should.

What about "TEMP OV" error during balancing (when one of cell have 4.20v, & others less. for example 4.20 4,18 4,19)?
1 year it chadge good, and now i can not use device

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

What about "TEMP OV" error during balancing (when one of cell have 4.20v, & others less. for example 4.20 4,18 4,19)?
1 year it chadge good, and now i can not use device

Love this charger! So far there hasn't been a battery it couldn't fully balance, love the graph screen and being able to store charging/discharging profiles. My only "wish" was that this could charge multiple batteries at the same time but then again, for the price I'll just get another charger :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Love this charger! So far there hasn't been a battery it couldn't fully balance, love the graph screen and being able to store charging/discharging profiles. My only "wish" was that this could charge multiple batteries at the same time but then again, for the price I'll just get another charger :)

During 2 years - work good.
But now i get error "TEP OV"
http://forum.modelka.com.ua/threads/55804-Turnigy-SMART6-pcntD0pcntBEpcntD1pcnt88pcntD0pcntB8pcntD0pcntB1pcntD0pcntBApcntD0pcntB0-quot-TEP-OV-quot
After bulk charging, after few seconds after begin balancing, get internal temperature = 01, and stop with error.
Its not hardware bug - electric signal from internal temp sensor normal.
Hobbyking, DO the FIRMWARE update!!!
Cause this error i cant use this device.
Please, please, please !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

During 2 years - work good.
But now i get error "TEP OV"
http://forum.modelka.com.ua/threads/55804-Turnigy-SMART6-pcntD0pcntBEpcntD1pcnt88pcntD0pcntB8pcntD0pcntB1pcntD0pcntBApcntD0pcntB0-quot-TEP-OV-quot
After bulk charging, after few seconds after begin balancing, get internal temperature = 01, and stop with error.
Its not hardware bug - electric signal from internal temp sensor normal.
Hobbyking, DO the FIRMWARE update!!!
Cause this error i cant use this device.
Please, please, please !!!

Got 2 Smart6, both with POWER error after a short time. HK refused to warranty it, so better stay away from it.

-Destroys itself
-No storage
-No balancing during discharge
-Small display
-Not calibratable

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got 2 Smart6, both with POWER error after a short time. HK refused to warranty it, so better stay away from it.

-Destroys itself
-No storage
-No balancing during discharge
-Small display
-Not calibratable

When my charger arrived, there was something rattling and then I noticed the LCD was out of place. A screw holding it in place had come loose and was rolling around inside. It could have easily shorted something if I had powered the charger on. I took it apart and put the screw back and the charger works fine, but I took off 1 star for quality...
Also, the internal resistance function doesn't work well. After I use it, I have to turn the charger off and on again or the next charge cycle wont work and it begins to misread the voltage of the cells. Even so, the values it gives me tend to be random with a different reading each time I use it on the same cells, so it's somewhat useless. Hence, another mark off for value..
Otherwise, it's a great charger and still pretty good at 4 stars :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

When my charger arrived, there was something rattling and then I noticed the LCD was out of place. A screw holding it in place had come loose and was rolling around inside. It could have easily shorted something if I had powered the charger on. I took it apart and put the screw back and the charger works fine, but I took off 1 star for quality...
Also, the internal resistance function doesn't work well. After I use it, I have to turn the charger off and on again or the next charge cycle wont work and it begins to misread the voltage of the cells. Even so, the values it gives me tend to be random with a different reading each time I use it on the same cells, so it's somewhat useless. Hence, another mark off for value..
Otherwise, it's a great charger and still pretty good at 4 stars :)

Really nice, accurate on each cell, you can disable the buzzer, I really like it

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really nice, accurate on each cell, you can disable the buzzer, I really like it

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Customer files
No File Name Download [1243]
Manual Download [2812]
Original manual Download [1243]
manual Download [1243]
No File Name Download [1243]
MANUAL Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!