New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

4,6 kg Corona DS238HV Digital Metal Gear Servo / 0,13 Sec / 22g

4,6 kg Corona DS238HV Digital Metal Gear Servo / 0,13 Sec / 22g

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

8,22 €
Estado:
Disponível
SKU:
014000001
WANT FREE SHIPPING? Click here to find out more!

4,6 kg Corona DS238HV Digital Metal Gear Servo / 0.13sec / 22g

Modelo: DS238HV
Tensão de funcionamento: 6.0V / 7.4V
Corrente de funcionamento: 300mA / 400mA
Velocidade de operação: 0.14sec.60º / 0.13sec.60º
Stall Torque: 4kg.cm / 4.6kg.cm
Tamanho: 29X13X30mm
Peso: 22g
Banda morta: ≤3uSec
Viagem de funcionamento: 40º / um pulso lado 400US viajar
Potenciómetro: 3 deslizante / Direct Drive
Rolamento de esferas: MR106
Engrenagem: Metal
Fio conector: 300 milímetros
Faixa de temperatura operacional: -20 ° C + 60c

  • SKU 014000001
  • Brand Corona
  • Peso 46.0000
  • Comprimento 76.00
  • Packaging Width 32.00
  • Altura 51.00
  • Torque ( kg) ( min. 0,01 kg ) 4.60
  • Speed ​​( Sec / 60deg ) 0.13
  • A ( mm ) 35.00
  • B (mm) 29.00
  • C ( mm ) 31.00
  • D ( mm ) 13.00
  • E ( mm) 40.00
  • F ( mm ) 19.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Incredible good servo for an incredible good prize! Highly recommended, I will buy more. Superfast shipping from the global shop to Europe included. Thanks HK.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incredible good servo for an incredible good prize! Highly recommended, I will buy more. Superfast shipping from the global shop to Europe included. Thanks HK.

very economic and usefull servo, as you see, its very cheap and you can use 7.4v high voltage.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very economic and usefull servo, as you see, its very cheap and you can use 7.4v high voltage.

I bought this item it is grosly over rated it burned op on the frist use its rated at 4.6 kg.cm should be rated at 1 kg.cm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought this item it is grosly over rated it burned op on the frist use its rated at 4.6 kg.cm should be rated at 1 kg.cm

very goog servo hard and fast

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very goog servo hard and fast

It's been the rudder servo in my Soling sail boat for 2 years now with a Life 2S battery. Absolutely perfect.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It's been the rudder servo in my Soling sail boat for 2 years now with a Life 2S battery. Absolutely perfect.

Nice servo, But there is quite some slop in all the servo arms on both of the 2 I bought, the screw for the drive shaft is about the worst quality I have ever seen. Head not centered very badly pressed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice servo, But there is quite some slop in all the servo arms on both of the 2 I bought, the screw for the drive shaft is about the worst quality I have ever seen. Head not centered very badly pressed.

Performs as advertised. Very strong. Slight differences in size (all measurements are in mm # in () is diff from Product Config Table): A = 34.60 (-.4), B = 28.93 (-.07), C = 30.21 (-.79), D = 11.48 (-1.52), E = 39.75 (-.25), F = 19.99 (plus.99)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Performs as advertised. Very strong. Slight differences in size (all measurements are in mm # in () is diff from Product Config Table): A = 34.60 (-.4), B = 28.93 (-.07), C = 30.21 (-.79), D = 11.48 (-1.52), E = 39.75 (-.25), F = 19.99 (plus.99)

Used this servo for a replacement in my 1/16 e revo, lots of power, found it to be a little bit on the slower side, but you can't beat the price for a metal gear servo anywhere, the fit is snug but will slide in if you undo the front battery vent cover first, also used a hk45 amp esc, and the hk donkey 380 (4200kv) motor, I could make this setup 3 times to one stock setup, thanks again hk!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used this servo for a replacement in my 1/16 e revo, lots of power, found it to be a little bit on the slower side, but you can't beat the price for a metal gear servo anywhere, the fit is snug but will slide in if you undo the front battery vent cover first, also used a hk45 amp esc, and the hk donkey 380 (4200kv) motor, I could make this setup 3 times to one stock setup, thanks again hk!!!

?????? ? ???????

:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

?????? ? ???????

:)

Just received the first one. Good servo; strong and fast. Robust horns, but they do not fit very well (a bit sloppy; screw to be very well tightened). Comes with side mounts; it would be nice if these became separately available as they also fit on 929/939 series.

"Actual size" as mentioned on the box is not the actual size!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the first one. Good servo; strong and fast. Robust horns, but they do not fit very well (a bit sloppy; screw to be very well tightened). Comes with side mounts; it would be nice if these became separately available as they also fit on 929/939 series.

"Actual size" as mentioned on the box is not the actual size!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!