Forged for a King in a distant realm, the legendary Excalibur is here. The Durafly Excalibur must be flown to be truly appreciated. Its innovative design features, such as the cantilever forward-swept wing, V-tail tail surfaces, incredibly strong construction, and stunning lines.

Just like the legendary sword, Excalibur's strength is paramount. The engineers at Durafly were given their hardest challenge yet: to design a wing that is ultra-thin but incredibly strong in EPO foam!

The wing has carefully positioned carbon fiber reinforcement and pre-tensioned glass fiber strips. The fuselage is feature-packed with a square carbon fiber tube and glass fiber strips. The V-tail along with control surfaces is reinforced. All these features combine to make the Excalibur a weapon.

Servos are all pre-installed with a whopping 3542 800kv Aerostar brushless outrunner motor up front and a 60amp Aerostar brushless speed controller. Two-piece removable wing makes assembly fast with a wire-free PCB connection between the wing and fuse.

The Excalibur is awesome: it climbs like a demon and the power-off vertical dives have enough energy to complete several maneuvers before power is required again. Durafly also supplies a vacuum-formed nose cone so that you can remove the propeller and turn the Excalibur into a very efficient, exciting, and fun to fly slope soarer.

Rule the sky with the Excalibur.

Features:
• Stunning looks
• Vacuum formed nose cone supplied for slope soaring
• Reinforced with carbon fiber and glass fiber
• Extreme speed, awesome maneuverability
• Unique forward sweep wing design
• PCB servo wing connectors
• Ready to fly in minutes

Specs:
Material: Highly compressed EPO foam
Wingspan: 1600mm (63")
Length: 1010mm
Flying weight: 1250g
Controls: 4 Channel (Ailerons, Elevator, Rudder (V-Tail), Throttle)
ESC: Aerostar 60amp brushless ESC (supplied)
Servos: 4 x 9g high torque (supplied)
Motor: 3542-800kv brushless outrunner (supplied)
Propeller: Aerostar folding carbon fiber 13x7 (supplied)

Required:
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1800~2200mAh 4S LiPo high "C" rated battery

Included:
1 x Durafly Excalibur with a motor, ESC, servos, and propeller

Please note: A copy of the instruction manual is available under the "Files" tab.