New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Laser230 FPV Drone Composite Kit (230 milímetros)

Laser230 FPV Drone Composite Kit (230 milímetros)

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

21,30 €
Estado:
Disponível
SKU:
366000017-0
WANT FREE SHIPPING? Click here to find out more!

O Laser230 é uma construção 230 milímetros zangão árvore que abraça FPV corridas compósito total. O Laser230 tem o que é chamado de um sistema limpo e sujo, que usa dedais de vibração para isolar o motor e sustentar a vibração do FC e câmera. O sistema Clean-e-sujo permite executar mais apertado, PID e ter uma sessão de vídeo FPV gelatina sem.

O motor de apoio braços de montagem do espaçamento de 16x19mm e 12mm. O tamanho máximo é prop 5inch e perfeito para os motores de 1704 ~ 2206 de classe. A construção composto durável vem com muitas disposições para a montagem e correias, fazendo instalar um piscar de olhos. O quadro tem 8 dedais de vibração para o isolamento, bem como uma nova câmera FPV-ansioso montagem entre os quadros. O Laser230 tem algumas aparência elegante com suportes de alumínio anodizado vermelho-quente e um acabamento fresco fosco, tornando este um excelente pequeno quad para fechar em torno de seu local de vôo local.

Características:
• construção Composite
• Ampla gama de opções de motor e energia
• Grande frame de isolamento de vibração secundário para mais espaço e layout mais fácil
• Tamanho compacto para proximidade voando em torno de obstáculos

especificações:
Distância entre eixos: 230 milímetros
Peso: 180 g
Altura: 82 milímetros com trem de pouso e gaiola centro

Requeridos:
4 x Motors 1506 ~ 2208
1 x bateria 800 ~ 1300mAh 7,4 ~ 11.1V (2 ou 3 células LiPoly)
4 x Hélices até 5in
7 ~ 12A 4 x do CES
1 x controlador de vôo Multi-rotor
rádio de 4 canais (6 canais recomendado para FPV e da utilização FC)
engrenagem FPV (opcional)

  • SKU 366000017-0
  • Brand Unknown
  • Capacidade ( mAh) -
  • Peso 247.0000
  • Comprimento 210.00
  • Largura 30.00
  • Altura 100.00
  • FPV250 Low Hung
  • Added heli landing gear to offer the battery some protection.
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

good frame for the price. flies well but a bit heavy (180g)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good frame for the price. flies well but a bit heavy (180g)

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.

Excellent frame. No complaints at all. Highly recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent frame. No complaints at all. Highly recommended.

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.

high quality, nice design.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

high quality, nice design.

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.

  1. 1
  2. 2
Customer files
laser230 pdb Download [1597]
Laser230 RTF Download [1283]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save