New Items Forum
Registar

Total Price

0,00 €

Carrinho 0 Carrinho 0 Loading...

Conversor de sinal Módulo SBUS-PPM-PWM (S2PW)

Conversor de sinal Módulo SBUS-PPM-PWM (S2PW)

Shipped From:
  • International (Hong Kong)
QTY:

Now save guardar 0,00 € 0,00 €

9,02 €
Estado:
Disponível
SKU:
333000011-0
WANT FREE SHIPPING? Click here to find out more!

Um grande dispositivo de alta precisão para conversão de sinal SBUS-PPM-PWM. conversor de sinal foi concebido para permitir que o utilizador para converter um sinal de entrada num sinal de PWM PPM correspondente e SBUS saída de sinal PPM ou, alternativamente, converter o sinal de entrada SBUS para uma saída de sinal ppm e sinal PWM correspondente.

sinal de entrada é automaticamente reconhecido e muda o sinal na direção certa.

Características:
• Sinal de entrada reconhecimento automático
• Quando o sinal de entrada é SBUS você pode alternar a saída de 1-8CH para 9-16CH com botão interruptor

especificações:
Tensão de funcionamento: Fonte de alimentação do receptor (3,7 ~ 8.4V)
Corrente de trabalho: <30mA
Tamanho: 29x26x10mm
Peso: 5,0 g

inclui:
1 X sinal de módulo conversor

  • SKU 333000011-0
  • Brand HobbyKing
  • Capacidade ( mAh) -
  • Peso 10.0000
  • Comprimento 150.00
  • Packaging Width 15.00
  • Altura 100.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excellent little piece. Used this to reduce the cabling on an Inside F5J glider, where it was built into the middle of the 6-servo wing, necessitating only one cable to go into the fuselage. No Manual is included, but it's pretty self-explanatory. Futaba users: make sure you connect it to an SBUS channel, not an SBUS2 channel. We've witnessed some servo jitter ("hiccups") with one of the three Units we purchased when used with a Futaba R7008 Receiver, but only on one of the unit's channels. Plugged the servo into another channel and all went well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent little piece. Used this to reduce the cabling on an Inside F5J glider, where it was built into the middle of the 6-servo wing, necessitating only one cable to go into the fuselage. No Manual is included, but it's pretty self-explanatory. Futaba users: make sure you connect it to an SBUS channel, not an SBUS2 channel. We've witnessed some servo jitter ("hiccups") with one of the three Units we purchased when used with a Futaba R7008 Receiver, but only on one of the unit's channels. Plugged the servo into another channel and all went well.

WORKS ON DJI D-BUS TOO!! FOR YOU FELLAS THAT USE LIGHTBRIDGE 1 WITH WOOKONG OR NAZA AND DONT HAVE FREE CHANNELS TO USE YOUR GIMBAL CONTROL AND SHUTTER!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WORKS ON DJI D-BUS TOO!! FOR YOU FELLAS THAT USE LIGHTBRIDGE 1 WITH WOOKONG OR NAZA AND DONT HAVE FREE CHANNELS TO USE YOUR GIMBAL CONTROL AND SHUTTER!!

BIG CORRECTION PREVIOUS POST. THE UNIT DOES DO PPM TO PWM.
The conversions are thus:
PPM in (Blue LED flashing once in short intervals) you get S-Bus out(ch10) and PWM out
PWM in (Blue LED flashing twice in short intervals) you get S-Bus out(ch10) and PPM out(ch9)
S-Bus in (Blue LED flashing three times in short intervals) you get PPM out(ch10) and PWM out
Works great.
The red LED OFF means the units PWM outputs are Ch1 to 8. The red LED ON means the units PWM outputs are Ch9 to 16. To toggle the red LED - hold down on the units tiny switch while applying power.
This unit works great.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

BIG CORRECTION PREVIOUS POST. THE UNIT DOES DO PPM TO PWM.
The conversions are thus:
PPM in (Blue LED flashing once in short intervals) you get S-Bus out(ch10) and PWM out
PWM in (Blue LED flashing twice in short intervals) you get S-Bus out(ch10) and PPM out(ch9)
S-Bus in (Blue LED flashing three times in short intervals) you get PPM out(ch10) and PWM out
Works great.
The red LED OFF means the units PWM outputs are Ch1 to 8. The red LED ON means the units PWM outputs are Ch9 to 16. To toggle the red LED - hold down on the units tiny switch while applying power.
This unit works great.

Great for converting S-Bus to PWM. Up to 16 channels. Disappointing to find it does not convert PPM to PWM. No instructions with the unit.
So here is a brief rundown on what the LEDs mean.
Red LED on means PWM is channels 9-16. Red LED off means PWM is channels 1-8. To switch the red LED on or off, you power up the unit while holding down the units tiny switch. Solid blue LED means no signal. Blue LED flashing twice in short intervals means PWM to S-Bus/PPM conversion. Blue LED flashing three times in short intervals means S-Bus to PWM conversion.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great for converting S-Bus to PWM. Up to 16 channels. Disappointing to find it does not convert PPM to PWM. No instructions with the unit.
So here is a brief rundown on what the LEDs mean.
Red LED on means PWM is channels 9-16. Red LED off means PWM is channels 1-8. To switch the red LED on or off, you power up the unit while holding down the units tiny switch. Solid blue LED means no signal. Blue LED flashing twice in short intervals means PWM to S-Bus/PPM conversion. Blue LED flashing three times in short intervals means S-Bus to PWM conversion.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!