Only in the UK: Check out our In-stock Planes, Batteries and Accessories

Large-scale aircraft are a pleasure to fly and this beautiful replica of a 2400mm Piper NE-1 Navy Cub is no exception. It has the same stunning looks as the smaller H-King J3 Navy Cub (NE-1) but on a much larger scale and is just as easy to fly. The Cub is made of balsa and plywood with a realistic Navy Blue printed covering.

The plane comes with a cowl complete with a dummy engine and a full instrument panel. There is a huge door to the cockpit for easy installation of batteries and RC electronics plus a set of pilot seats. Outside is a functional bungee-style undercarriage with large wheels for easy takeoffs and landings on grass fields.

Features

• A faithfully reproduced authentic scale model of the famous Piper NE-1 Navy Cub
• All wood construction
• Plug-in wings for easy transportation
• Quick wing strut connection for easy field construction
• Molded dummy engine and cockpit detail with a full instrument panel
• Set of pilot seats
• Working cockpit side door for easy access to R/C electronics and battery
• Functional bungee undercarriage
• Large size wheels for easy grass field takeoff and landings

The H-King TTX is an excellent, scale rendition of the original. It's made of tough EPO foam, is beautifully crafted with panel lines, scale cockpit, and other details. Plenty of power with the scale 3-blade propeller.

With an 1100-millimeter (43-inch) wingspan, the TTX is small enough to transport fully assembled. You can easily remove the wings with wiring quick-connectors. Take-offs and landings are a breeze thanks to the scale-slotted flaps and the super bright navigation lights, which enable people to easily spot it. With a thrust ratio of 1:1.3, there is no trouble doing some easy rolls and loops and other maneuvers. The large hatch area makes it easy for installing a battery.

Features

• Lightweight yet strong EPO material
• Scale details like antennas, steps, cockpit, panel lines, and more
• Big powerful scale slotted flaps
• With super bright navigational lights
• Big battery access hatch for easy battery installation
• A set of specially designed servos and LED wiring quick-connectors are pre-installed for easy wing installation
• An efficient 3-blade scale propeller and a powerful motor are perfectly matched to provide longer flight times and higher power with more than a 1:1 thrust to weight ratio

The Phantom features tough EPO construction with molded-in camera bays - one forward-looking just under the nose and another mount in the top of the canopy with plywood support pre-installed. This updated version features premium 3K wrapped carbon tube spars and now breaks down into three pieces for easy transport.

This being the kit version you will require your own choice of 9-gram servos, motor, and speed controller - we suggest a low current power system not exceeding 30 amps, this will provide you with flights in excess of 30 minutes on a 3s 4500mAh LiPo.

The H-King Pilatus Porter PC-6 has a large wingspan of 2150 millimeters (84.6 inches) and is made of lightweight balsa and ply. It is superbly finished with a detailed cover to give an extremely realistic look. The plane provides a huge presence in the air, especially when doing STOL maneuverers and realistic takeoffs and landings. It can be configured for either electric motors or gas/nitro engines. The Porter will make for a great addition to everyone’s RC hanger.

As an ARF (Almost Ready to Fly) model, you will need to do assembly work and decide on your power plant (gas or electric). The wing control surfaces come pre-hinged to make the building easier but you will need to assemble the rest. There is a large battery hatch upfront if you are going electric and a realistically painted fiberglass cowl makes the front end look just right. The wings come off to make it easier to transport the plane to the flying field.

Features

• All Balsa and lite-ply construction
• Fully covered in weathered detail
• Fiberglass cowling
• Control surfaces pre-hinged and installed
• Two-piece wings with aluminum wing spar
• Operating cabin doors
• Big battery hatch for the electric version
• Gas or Electric configuration

More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilizing an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and higher discharge rates than similar density lithium polymer (non nano-tech) batteries.

For those who love graphs, it means higher voltage under load, straighter discharge curves, and excellent performance. For pilots, it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!

With its ready to go 2.4GHz RC and WiFi FPV systems, the Q212K is already a winner before you consider the 6-axis stability, 1 key takeoff/return-to-home features, 360-degree flip functions, barometer controlled automatic hovering capability, and the superb headless mode for stress-free flying.

Not only has the Q212K taken care of orientation worries, the "one key return" button will have the model heading flying back regardless of wherever it happens to be pointing! All things considered, the Q212K is a great way to get in on the FPV action!

The FrSky X-Lite Pro is an upgraded version of the X-Lite. The X-Lite Pro features all the benefits of the X-Lite design with the features of traditional full-sized radios. It now comes with the extra benefit of the newly developed ACCESS (Advanced Communication Control, Elevated Spread Spectrum) protocol.

The most exciting new feature is the new ACCESS transmission protocol that will provide even lower latency and enhanced performance. It is compatible with older ACCST D16 receivers. The intergraded 6-axis sensor unit will allow you to use the controller as a motion-sensing controller to control the inputs of a model during flight or use it to point a camera in the desired direction.

Features

• Ergonomic and compact design
• MC12 Lite all-metal CNC digital hall sensor gimbal
• Upgraded RF module with installed ACCESS protocol
• Supports spectrum analyzer function
• New PARA wireless training system
• Supports wired training function
• High-efficiency quick-charge system
• Supports motion sensing control
• Haptic vibration alerts and voice speech outputs

The Turnigy Reaktor range of chargers is known for their big power and diminutive size. The Turnigy Reaktor 120 DUO has stuck with this formula but it now includes a built-in AC power supply to complement its DC input and comes with two 120W outputs.

This high-power balancing charger/discharger can provide up to 12A charge rates and handle up to 6S LiPo/LiFe/Li-Ion/LiHV or 15S NiCd/NiMH accurately. Not only does the Reaktor 120DUO offer a super high charge rate capability it now features storage charging, cyclic charging / discharging, 10 charge parameter memory, battery internal resistance checking, and foam-cutting options. Plus a USB charging outlet.