Стать поставщиком Блог Новинки
Зарегистрируйтесь

Итоговая цена

0,00 A$

Корзина 0 Корзина 0 Loading...

AXN Поплавок-Jet EPO (АРФ)

Generating Links

AXN Поплавок-Jet EPO (АРФ)

Цена:

Now save сохранить 0,00 A$ 0,00 A$

65,98 A$
Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
AXN-C-KIT
Хотите бесплатную доставку? кликните сюда Узнать больше!

Струя AXN Поплавок является идеальной моделью для начинающих. Его стабильная летные характеристики и прощая обработки делают его идеальной платформой для обучения летать. В отличие от некоторых моделей в своем классе AXN Поплавок-струя поставляется с элеронами прямо из коробки. Это критический контроль поверхности, что все начинающие пилоты должны освоить.

Изготовленные из прочного ЭПО пены с высокой глянцевой поверхностью AXN Поплавок-Jet способна достигать высоких скоростей в небольшом количестве пространства или скользя вокруг грациозно на ветру только необходимости дроссельной заслонки, чтобы набрать высоту.

Предсказуемые характеристики полета, низкая загрузка крыла и толкатель опора также делают AXN Поплавок-Jet идеальной платформой для FPV. Использование меньшего размера батареи, такие как 1600mAh до 1800mAh 3S1P позволит дополнительной полезной нагрузки в передней части летательного аппарата и сделать нахождения правильного CG без необходимости добавлять дополнительный вес хвоста легко.

Предложенный двигатель и пропеллер 5x5 предложить как производительность и время полета на основе вашего стиля полета. Вам потребуется 2100kv Brushless Походный, 4 х 9gram сервоприводы, батарея 1600mAh ~ 2200mAh 3S1P LiPoly (в зависимости от требований полезной нагрузки) а 20Amp ESC и собственный передатчик и приемник (Tx / Rx) для завершения этой модели.

Проверенная время и время снова AXN Поплавок-Jet помечает все правильные коробки для всех, кто желает попасть в хобби в качестве новичка или промежуточных пилотов, желающих попасть в захватывающий мир FPV полетов.

Характеристики:
Размах: 1290mm
Предохранитель Длина: 860мм
Двигатель: 2100Kv Outrunner (не входит в комплект )
Пропеллер: 5x5inch х (2pc включен)
ESC: 20A (не входит в комплект )
Сервоприводы: 4 х 9g сервоприводов (не включены) для Раддера, Лифт, 2x элеронов

Необходимые:
Ваш собственный RX / TX
20A Brushless ESC
4 X 9g Servo
1600 ~ 2200mAh 3s LiPoly
2100kv Походный двигателя

  • Размах (мм ) 1280.00
  • AXN Floater Jet with Turnigy Graphene 1500mAh 3S 65C and 6x5 Prop.
  • Low, Slow, and Inverted
  • FLY TYME - AXN Floater Jet Build Tips & Review
  • FLY TYME - AXN Golden Hour
  • AXN-FLOATER WITH 70 mm EDF
  • AXN Floater Jet Build Review & Tips - FLY TYME
  • AXN Floater Jet Flight Footage - FLY TYME
Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Темы
Сортировать по
Самые последние темы
* Псевдоним пользователя:

* Ваш ответ:


Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Отменить
Отправить
Опубликовать новую тему
* Псевдоним пользователя:

* Ваша тема:



Пожалуйста, введите текст, показанный на картинке, в поле ниже
*Код верификации:
Опубликовать тему

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

Jose Maria | Проверенный покупатель

  • Overall
  • Quality
  • Value

AXN Floater-Jet EPO 1280mm (ARF)

Mar 13, 2018

Nice and cheap plane to learn to fly. 4 servos (9g), 30A ESC and the recommended motor and you are flying at a very low cost.

martin | Проверенный покупатель

  • Overall
  • Quality
  • Value

Easy to fly. Fly at walking speed or with unlimited vertical.

Nov 20, 2017

Buy the kit with the motor as it has enough power for unlimited vertical. With this plane you can float around searching for thermals or fly mild pattern style aerobatics. No 3D. I now have over 60 twenty minute flights on mine and I would buy it again. I use a 6-4 or 6-4.5 prop with the stock motor and a 3 cell 2200mah battery. Mine does have a couple problems. Don't trust the factory glue joints on the arf. They are really poor! All three of them. Take the time to glue it together with epoxy you won't be sorry. The ailerons are undersized so mix in some rudder it helps improve the roll rate considerably. I Used brightly colored tape to reinforce the hinge points, wing underside and leading edge, and the bottom of the fuselage. Don't forget to use the thread locking compound and your good to go.

RobRoy | Проверенный покупатель

  • Overall
  • Quality
  • Value

AXN CF

Sep 02, 2017

This is a very good plane. Very stable flight caracteristics in the air and fast. It is also a good sailplane. Go up in the sky and turn the engine down. Keep the nose down for speed and up you go!
Use APC prop 6x5 for best results. y don t trust the added props.

Jack | Проверенный покупатель

  • Overall
  • Quality
  • Value

One of the best starter planes

Aug 28, 2017

Amongst the best learner planes out there at a bargain price. It will grow with you too as it handles well at slow floating speeds as well a medium speed acrobatics. Great to learn on as it is a pusher and you can hand launch and belly land. I started learning on this plane and was able to fly solo within 6 flights, as a complete beginner.

gav | Проверенный покупатель

  • Overall
  • Quality
  • Value

great value, goes fast and slow, glides ok. bargain price. Easy to build, Great first rc

Apr 14, 2017

Highly recommend this plane. Definitely get the cheapest model and click on the motor in the Accessories tab and order it too, You'll need a 2200 3s Lipo, four Hextronik 9g servos and 25A BEC3amp speed controller, all available through HK. If you dont have a radio get a basic Radio Tx/Rx, like Turnigy 4,5,6 or 8 channel. I started with 9x Before you build its a good idea to watch the xjet AXN build youtube vid. Can take off on short grass in the park or throw launch but watch the dive when you crank it on.

gav | Проверенный покупатель

  • Overall
  • Quality
  • Value

great value, goes fast and slow, glides ok. bargain price. Easy to build, Great first rc

Apr 14, 2017

Highly recommend this plane. Definitely get the cheapest model and click on the motor in the Accessories tab and order it too, You'll need a 2200 3s Lipo, four Hextronik 9g servos and 25A BEC3amp speed controller, all available through HK. If you dont have a radio get a basic Radio Tx/Rx, like Turnigy 4,5,6 or 8 channel. I started with 9x Before you build its a good idea to watch the xjet AXN build youtube vid. Can take off on short grass in the park or throw launch but watch the dive when you crank it on.

kaido | Проверенный покупатель

  • Overall
  • Quality
  • Value

good plane

Mar 09, 2017

Good for beginners. Very hard to break. Simple to fly.

SKY FALL | Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 07, 2016

Great plane for the novice and the more professional Pilot

Richard | Проверенный покупатель

  • Overall
  • Quality
  • Value

Customer Rated

Mar 23, 2016

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

| Проверенный покупатель

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 23, 2015

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

Файлы клиентов
Manual Download [493]
my axn floater-jet Download [233]
my axn floater-jet Download [233]
Manual 01 Download [121]
Manual 02 Download [121]
Manual 03 Download [135]
motor_2 Download [139]
motor_1 Download [129]
cabin Download [224]
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!

Related Tags

Аксессуары