New Items ФОРУМ
Зарегистрируйтесь

Итоговая цена

0,00 руб.

Cart 0 Cart 0 Loading...

AXN Поплавок-Jet EPO (АРФ)

AXN Поплавок-Jet EPO (АРФ)

Now save сэкономь 0,00 руб. 0,00 руб.

2 616,72 руб.
Статус:
Нет в наличии!
Вес:
2549 g
SKU:
AXN-C-KIT
WANT FREE SHIPPING? Click here to find out more!

Струя AXN Поплавок является идеальной моделью для начинающих. Его стабильная летные характеристики и прощая обработки делают его идеальной платформой для обучения летать. В отличие от некоторых моделей в своем классе AXN Поплавок-струя поставляется с элеронами прямо из коробки. Это критический контроль поверхности, что все начинающие пилоты должны освоить.

Изготовленные из прочного ЭПО пены с высокой глянцевой поверхностью AXN Поплавок-Jet способна достигать высоких скоростей в небольшом количестве пространства или скользя вокруг грациозно на ветру только необходимости дроссельной заслонки, чтобы набрать высоту.

Предсказуемые характеристики полета, низкая загрузка крыла и толкатель опора также делают AXN Поплавок-Jet идеальной платформой для FPV. Использование меньшего размера батареи, такие как 1600mAh до 1800mAh 3S1P позволит дополнительной полезной нагрузки в передней части летательного аппарата и сделать нахождения правильного CG без необходимости добавлять дополнительный вес хвоста легко.

Предложенный двигатель и пропеллер 5x5 предложить как производительность и время полета на основе вашего стиля полета. Вам потребуется 2100kv Brushless Походный, 4 х 9gram сервоприводы, батарея 1600mAh ~ 2200mAh 3S1P LiPoly (в зависимости от требований полезной нагрузки) а 20Amp ESC и собственный передатчик и приемник (Tx / Rx) для завершения этой модели.

Проверенная время и время снова AXN Поплавок-Jet помечает все правильные коробки для всех, кто желает попасть в хобби в качестве новичка или промежуточных пилотов, желающих попасть в захватывающий мир FPV полетов.

Характеристики:
Размах: 1290mm
Предохранитель Длина: 860мм
Двигатель: 2100Kv Outrunner (не входит в комплект )
Пропеллер: 5x5inch х (2pc включен)
ESC: 20A (не входит в комплект )
Сервоприводы: 4 х 9g сервоприводов (не включены) для Раддера, Лифт, 2x элеронов

Необходимые:
Ваш собственный RX / TX
20A Brushless ESC
4 X 9g Servo
1600 ~ 2200mAh 3s LiPoly
2100kv Походный двигателя

  • Артикул AXN-C-KIT
  • Brand H-King
  • Вес ( г ) 2549.00
  • длина 830.00
  • Width 240.00
  • Высота 250.00
  • IC / 2 : Елец -
  • Motorsize ( диам - или - сс) -
  • Размах (мм ) 1280.00
  • Length(mm) -
  • SaleWeight ( г ) -
  • Емкость ( мАч ) -
  • AXN Floater Jet with Turnigy Graphene 1500mAh 3S 65C and 6x5 Prop.
  • Low, Slow, and Inverted
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great plane for the novice and the more professional Pilot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane for the novice and the more professional Pilot

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

what a brilliant plane got this about a year ago, on the first flight it was a dream to fly until i somehow got confused and ended up nose diving into the floor snapping the plane in half, but within half an hour it was glued back together and still flys perfect to this day, it was easy to put together and for a first time build it took me quite a while (2hours) but in the end it turned out fine just remember the loctite or you will loose some screws in flight like me.

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice plane, this is my first plane and it was no problem to me to build it and get it in the air. Its also no Problem to repair the foam with some glue or hot water.

I like to call this a perfect beginner plane, because its cheap repairable and easy to fly. And it has enough space for fpv equip and at least 20 min flight time.

Had this plane 2 months now being a beginner i have already crashed alot but this plane is extremely durable and easily glues back together, i used the 11.1v 2200mAh x-thin zippy batteries(PRODUCT ID: Z22003S-25-X) which fit perfectly without having to remove any foam from the battery compartment, this battery gives extremely long run times in excess of 30mins and the motor has plenty of power with the 5x5 supplied prop, overall i would highly recommend this to any beginner and experienced RC pilot

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Had this plane 2 months now being a beginner i have already crashed alot but this plane is extremely durable and easily glues back together, i used the 11.1v 2200mAh x-thin zippy batteries(PRODUCT ID: Z22003S-25-X) which fit perfectly without having to remove any foam from the battery compartment, this battery gives extremely long run times in excess of 30mins and the motor has plenty of power with the 5x5 supplied prop, overall i would highly recommend this to any beginner and experienced RC pilot

Brilliant model to fly. Great fun and has really good performance at both fast and slow speeds. Was half expecting the wings to snap at one point but it stood up really well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brilliant model to fly. Great fun and has really good performance at both fast and slow speeds. Was half expecting the wings to snap at one point but it stood up really well.

There's a version with the stock motor that's not this one. Great plank for FPV, and it glides oh so well! Very quick to put together... the spar for the wings actually works very well... if you want a slow FPV flyer with a decent amount of room, this is it!

The motor is a little weak, but it will get you well in the air, just don't expect blazing speeds :) I cut into the fuselage to mount a naze32 running baseflight since they added RTH code. Haven't tested it yet but did maiden it last weekend and for FPV this is a LOT of fun!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

There's a version with the stock motor that's not this one. Great plank for FPV, and it glides oh so well! Very quick to put together... the spar for the wings actually works very well... if you want a slow FPV flyer with a decent amount of room, this is it!

The motor is a little weak, but it will get you well in the air, just don't expect blazing speeds :) I cut into the fuselage to mount a naze32 running baseflight since they added RTH code. Haven't tested it yet but did maiden it last weekend and for FPV this is a LOT of fun!

easy build
easy flying
easy landing
just under 500G with no aileron, 2S 2200 and a 2805, 6X5 slowfly, 400G thrust more than enough as i did not want speed
flies good in the wind
yes, very little room in the fuselage for FPV stuff for example, but with no canopy or an homemade one it will be ok.
and for 42 you can't go wrong as it is a very good and nice to see fly one

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

easy build
easy flying
easy landing
just under 500G with no aileron, 2S 2200 and a 2805, 6X5 slowfly, 400G thrust more than enough as i did not want speed
flies good in the wind
yes, very little room in the fuselage for FPV stuff for example, but with no canopy or an homemade one it will be ok.
and for 42 you can't go wrong as it is a very good and nice to see fly one

My introduction to electric planes, and Im so happy about it.
Very very easy to fly and incredibly strand in a crash. I have crashed tis into the sean and even had a battery fire and its still going! Its easy to build, but you need something like a 2200mah battery otherwise its tail heavy. I fly a Gopro on top of mine all day

http://www.youtube.com/watch?v=l0zpJNZAwgI&list=UUJm_qIN3z_i78NOndi_W-wA&spfreload=10

Im running a 30a ESC, a 2200 motor it is incredible...buy it buy it buy it!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My introduction to electric planes, and Im so happy about it.
Very very easy to fly and incredibly strand in a crash. I have crashed tis into the sean and even had a battery fire and its still going! Its easy to build, but you need something like a 2200mah battery otherwise its tail heavy. I fly a Gopro on top of mine all day

http://www.youtube.com/watch?v=l0zpJNZAwgI&list=UUJm_qIN3z_i78NOndi_W-wA&spfreload=10

Im running a 30a ESC, a 2200 motor it is incredible...buy it buy it buy it!

This plane is similar to the multiplex easystar, its a little bit smaller, but the behavior its almost the same.
Im using a turnigy 2826 with the original propeller and 3s 2200mah batteries, its not very fast but is good to learn. Its not easy to fit the motor, had to cut the plastic piece where the engine is fixed to. Also does not have many space inside with all the wires passing near the servos and the rods.
For a beginning is problably a good choice. (I didnt crash mine, so i dont know if its good on that aspect)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is similar to the multiplex easystar, its a little bit smaller, but the behavior its almost the same.
Im using a turnigy 2826 with the original propeller and 3s 2200mah batteries, its not very fast but is good to learn. Its not easy to fit the motor, had to cut the plastic piece where the engine is fixed to. Also does not have many space inside with all the wires passing near the servos and the rods.
For a beginning is problably a good choice. (I didnt crash mine, so i dont know if its good on that aspect)

Ok floater, space for electrics is tiny though, I had to cut the centre to get the wires in but flies well

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok floater, space for electrics is tiny though, I had to cut the centre to get the wires in but flies well

Customer files
Manual Download [493]
my axn floater-jet Download [233]
my axn floater-jet Download [233]
Manual 01 Download [121]
Manual 02 Download [121]
Manual 03 Download [135]
motor_2 Download [139]
motor_1 Download [129]
cabin Download [224]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save