Зарегистрируйтесь

Product Finder

Настройки

Useful links

Живой чат
 
[["US","AU","GB","DE"]]
Зарегистрируйтесь

SU47 Твин 55mm EDF Jet (KIT)

SU47 Твин 55mm EDF Jet (KIT)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Вес:
1950 g
Артикул:
SU47BRKT-KIT

Combine

essential items and
esc
battery
servo
Описание
товара

Разработано Sokhoi в России в качестве экспериментального самолета, чтобы показать случае их технические достижения в области дизайна реактивного истребителя СУ-47 использует конфигурацию обратной стреловидностью крыла при высокой маневренности и больших углах атаки.

Если вы ищете экспериментального самолета EDF то СУ-47 помечает все правильные коробки. Вперед прокатилась конструкция крыла будет вызывающе выделяться из регулярного EDF струйного толпы. Также показывая TWIN 55мм 3 единицы лезвия EDF, навесных рулей и легкий доступ к Батарейный отсек СУ-47 Твин 55mm EDF комплект шаг выше обычного EDF foamie струи. Вам потребуется 2 х 2040-4300kv Inrunner бесщеточных с 2.3mm валах для размещения вентилятора 3 ножа, 3 х 9g сервоприводы (2 для поверхностей управления и 1 для рулевого колеса носа), а 11.1V 2200mAh 3S1P Lipo аккумулятор и свой собственный передатчик и приемник (Tx / Rx) и через час или около того времени сборки.

Технические характеристики:
Длина: 1024mm
Размах: 750мм
Площадь крыла: 12.7dm2
Полетный вес: ~ 700g
Нагрузка на крыло: 55г / дм2
Канальный вентилятор: блоки Твин 55мм 3 лопастной вентилятор ( в комплекте)
Батарея: 11.1V 2200mah 20c (обязательно)
Батарея Площадь: 38мм х 27мм х 105мм (MAX)
Сервопривод: 3 х 9g (обязательно)
ESC: 2 х 18А (обязательно)

Необходимые:
Двигатель: 2 х 2040 4300kv Brushless Inrunner (с 2.3mm валом)
Сервопривод: 3 х 9g
Батарея: 11.1V 2200mah 3S1P 20c
ESC: 2 х 18А
Радио: Ваш собственный Tx / Rx

Product
Specifications

Дополнительная информация

  • Артикул:
    SU47BRKT-KIT
  • Brand:
    Нет
  • Емкость ( мАч )
    Нет
  • Вес ( г )
    1950.00
  • длина:
    870.00
  • ширина:
    130.00
  • Высота
    455.00
Community
Discussions
Rate&
Review

Напишите ваш собственный отзыв

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Pas facile pas conseill aux dbutants
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
low price for high class and good quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Attention!
I bought the engine for the aircraft to the shaft of 2.3 mm as it is written in the description.
Collet which is sold bundled with edf can be mounted on a shaft with a minimum size of 3 mm.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I haven't receaved my plane yet but have ben reading alot on it and it sounds like a good buy can't wate to get mine
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
fixed 2x 4.3k out runner motor, power shld be enough to lift the plane. look through the manuel but unable to find the c.g. anyone can share the c.g of this plane? thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Update-Aug 2. I modified the airframe to accept a single fan just ahead of the area for the original two fan position. I used the T-2815 4800 KV with a 40 amp SC and a 2200 Nano. Internal ducting was easy using depron and plastic pop bottle parts with the twin exit/efflux tubes reduced to the same size of other single fan setups. No dead weight but I did fill the flimsy nose cone with expanded Gorrila glue. Excellent flight performance, easily over 100kmh, rolls perfect and lands well with a little power on. Easily my favorite jet now.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
OK, so this is not a good first EDF, I have gone through a series of misfortune and after making some repairs I have finally flown this. I have found the CG needs to be roughly 1/2 to 1" back from the wingtips. Since up elevator creates the effect of a aileron up wing spoiler as everything is connected by linkage. I have found that it helps to have some amount of down aileron at nuetral elevator so you get a flaps effect. This thing needs speed to get airborne so get some good esc's with heat sinks and some powerful motors. I had to use a 1300 Mah 3 S battery to get it off the ground and it was admittidly a short flight. If you wanted to have separate aileron servos and evelavtor servos the added weight in the back may help with the balance. It flew nicely once airborne. The one rock got sucked up and broke a fan blade so it didn't have the power it should have butwith high nose up I had good control. I'm thinking about buying a second kit now that I have some of the basic info to help it be more succesful. Hope you get one and sort it out so we can all learn from your efforts. !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I got this plane from FIY in ARF mode.

Built in less than 45min.

The stock EDFplusESC responded very well to 2.2 nano-tech 25C & Turnigy 2.2 20C.

The plane flies excellent, the only weak point is the front landing gear that is easily broken. I glued a piece of plywood with a hole to replace the plastic one.

Manouverability is superb. Rolls are absolutely axial, no bad tendencies.

Landings need to be done carefully with some speed .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Have had the pleasure of having two of these Used Hk foam safe and HK five minute eoxy. Hk esc, KMS inrunners from phase 3 F-16 Caorona 4ch synth RX Turnigy 9X TX.

Both hit the ground not on purpose. Cg no brainer built in with the placement of the battery tray 2200 HP 3S easy ROG.

Do not think I will try another

will probably put the power set in an A-10 kit

Happy landings
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I RECEIVED MY SU-47 KIT,IT APPEARS WELL DESIGNED,PARTS FIT PROPERLY.

THE ONE OBSERVATION HERE IS THAT THE EDF UNITS SUPPLIED WITH THE KIT ARE UNAVAILABLE ,THEY ARE DIFFERENT FROM THE USUAL 55 EDF UNITS IN A FEW IMPORTANT WAYS,IS THERE A WAY I CAN PURCHASE TWO ADDITIONAL UNITS,I DO NOT WANT TO USE A DIFFERENT STYLE UNIT.

Thanks

mike

mwb8345a@aol.com

Try to include as much data as possible.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo

Метки товара

Используйте пробелы для отделения меток. Используйте одинарные кавычки (') для фраз.