Итоговая цена

0,00 руб.

Корзина 0 Корзина 0 Loading...

Super Cub EP 80in АРФ

Generating Links

Super Cub EP 80in АРФ

Уже купили Discontinued Product

Please continue searching for a similar product.
Артикул:
SuperCub_GP
Хотите бесплатную доставку? кликните сюда Узнать больше!

Как ваши самолеты большой и медленный?
Это легко летать 80inch Super Cub это радость летать с его медленным посадок, предсказуемые характеристики полета и низкую скорость сваливания.

Построенный из лазерной резки слоя и бальзы, Супер Cub приходит 95% готовый. Просто прикрепите крылья и включить свой собственный двигатель (+0,60 размер) и electics.
Все оборудование включено.

Технические характеристики:
Размах: 2050mm (80.7in)
Длина: 1450мм (57.1in)
Площадь крыла: 64dm2
Похожие мотора: размер Turnigy G60 (обязательно)
Рекомендован ESC: 60A (обязательно)
Похожие Опора: 14x8 или 16x10 (обязательно)
Сервопривод: 4 х ~ 9 ~ 20g (обязательно)
Батарея: 5 ~ 6S 4000mAh LiPoly (обязательно)
Вес (без мотора / батареи и т.д.): 3400g

Что в коробке.
95% завершено Super Cub ARF самолета.
Все оборудование, необходимое для завершения.
Мотор крепление для серии G60 или немного больше OutRunners & .60 ~ 0,90 размер газовых двигателей.

Что вам нужно.
9 ~ 20г сервоприводы (4pc)
G60 серии скороход.
Батарея 5 ~ 6S 4000mAh Lipo
60A ESC
Радио передача (Rx и серво провода в том числе у-свинца для сервоприводов элеронов)

Загрузить видео

Для загрузки видео необходима регистрация войти в систему или Зарегистрируйтесь

Для того, чтобы оставлять отзывы, необходимо зарегистрироваться войти в систему или Зарегистрируйтесь

Andrew | Проверенный покупатель

  • Overall
  • Value
  • Quality

if you want a good plane for th money this is one for you..

Dec 29, 2016

Parts needed I give an 4.5 out of 5 as motor mount for electric motor is needed but typical in most gas planes.

Cut of wood, film finish, glass and cowl I give 5 out of 5 very nice. wood is laser cut, film is thick and tuff, paint on cowl is beautiful..

Design as far as use at the field I give 4.5 out of 5 as I don't think there is any better this will need just a couple of mods.

Fit I did find the typical misalignment of the tail fins this will take some massaging as I have found most wood arfs do. a little sanding here and there but not bad. I give 4 out of 5 for this.

landing gear seems a tad weak with the smallish wheels I already have the bigger wheels I give a 4 out of 5 for this also..

this is a gas/electric as far as fitting a battery some mods will need to be done but nothing major I give this a 4.5 out of 5..

all in all very nice plane.

later Andrew K

Richard | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Aug 12, 2015

Great value. The plane went together without problems. Its one of the first artf's i've built that did not require trimming the tail seat to make it square - it is a surprisngly accurately built model. I fitted an old Zenoah 23 mag, and put the battery pack in the tail - balance was spot on. It flies great. I fly from rough ground and fitted tundra like tyres. It practically comes to a standstill for landing approaches even with the heavy Zenoah - I'm very happy!

Jabbamichael | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Apr 18, 2014

I have bought one of these, and just love it.. its sold as an electric airplane, but it comes with a fuel tank and motor mounts for a nitro motor. I installed an ASP 91 four stroke and it seem to handle it quite well. Not much in the way of build instructions, but the hardware included was of good quality and if you have built an ARF model before, you will have no trouble.

https://www.youtube.com/watch?v=fK9FM6G8Ibo

Dean Blair | Проверенный покупатель

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Mar 20, 2014

Well, where do I start! Got this this afternoon came well backed. Unboxed and inspected all the parts, all in tact and a lovely finish. The hardware is great and comes with everything. I got a RCG 15cc engine for this which will pull it around nicely. The thing is massive! Comes with .60-.91 size engine mount and a nice size fuel tank. As always, a great price on hobbyking! Highly recommend! Thanks HK!!

unleaded | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Feb 03, 2014

just wrote a long reveiw with regards to the elevator /tailplane failure i had with mine but it logged me out befor i could post the short is that there is a swaffed joint half way along the leading edge of the tail plain that will crack under normal flying loads it has No BACKING SUPPORT BEHIND IT and is only about 5mm section at the highest load piont and is made of SOFT balsa
do your self a favor stripp the top covering off (its plain white) so easy to replave and put some supports behind the joint IF YOU DONT DO THIS IT WILL FAIL you have been warned other than that its a fabioules aircraft

unleaded | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Jan 14, 2014

i have just finished building this lovely bird and found some very minor issues while the hardware is of reasonable quality i found the ball links had very little adjustments so i changed them to metal clevis i have fitted a super tiger 75 2st to mine and i have strengthed up the front firewall with a gusset and a diagonal brace from the canopy former to the fire wall i did this as there are four cut outs in the side for switches why you need four i dont know anyway with my set up the cg came out as spec and dry weight is 3.45 kgs which is great for a model of this size you will need some long servo extenstion and i painted all the inside of the cabin area matt black before i fitted the windows as it tends to make all the diagonal bracing disapear maiden is planed for tomorrow

m_s900 | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Jun 23, 2013

This is a beatiful plane. It flies very slow, even without flaps, and "stall" is an unknown word for this model.
I'm using this motor Turnigy Aerodrive SK3 - 5055-430kv, a wood propeller 17x8, 3300 mAh 6S battery. At full throttle I measure 1.500 W and I have 1:1 thrust ratio!
It takes some hours to build it, but nothing really difficult, even with the poor manual provided by the manufacturer.
What else can I say? Oh yes, the landing is extremly easy.
Just one minor flaw: the wood triangles does not fit the landing gear. The landing gear seems different form what I see on the manual, so I think it is a new one.

Thomas | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

May 09, 2013

This plane is great, buy one!! It was my first build and I'm very happy with it. I'm running the G60 and a Turnigy 5S 400mah in it. To obtain proper COG I had to mount the beast of a battery in the cockpit and add 4-5OZ of lead against the firewall.

Impressed with the quality of the preinstalled parts such as fuselage, wings, tail, etc. If you're looking for a big plane at a small cost, this is the one for you.

Let me know if you have any questions.

JOSHO | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Feb 01, 2013

i got this plane and had it going in 1 day with rcg 26cc in it so simple to build big wheels all round and u have a great plane love it flys like a dream

JOSHO | Проверенный покупатель

  • Quality
  • Value
  • Overall

Customer Rated

Feb 01, 2013

got this plane and had it going in 1 day so simple to put together i have rcg 26cc in it and it loves it only about 100 grams of counter weight needed bigger wheels all round and u have one really nice plane for the money love it

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Файлы клиентов
No File Name Download [811]
Super Cub + RCG26 Download [825]
supercub HK modified Download [84]
supercub HK modified Download [84]
No File Name Download [56]
supercub hk modified gear Download [44]
supercub HK modified gear paint Download [68]
supercub HK modified covering Download [65]
supercub HK modified fintion Download [41]
pipersupercub HK modified imartriculatio Download [74]
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Загрузить файл

Зарегистрируйтесь, чтобы загружать файлы.
пожалуйста войти в систему или Зарегистрируйтесь Начните помогать коллегам по хобби!

Аксессуары