A full screwdriver set in one? It automatically changes bits almost single handedly? Say it can't be true. It is. Our 10-in-1 Auto Loading Ratcheting Screwdriver combines Phillips, Flathead, and Torx sets into one handle. Designed to be ratcheting for easy screw removal/driving, or it can be locked into a fixed position, it is a truly versatile tool. The Phillips and Flat head drivers are housed in a rotating barrel that can be swapped by simply pulling back on the clear handle to retract the bit and then rotating the green barrel, select a new bit. Push the clear handle forward and it automatically loads the new bit. For using the Torx bits, they are manually swapped and housed inside the clear handle.
This is a great compact multi-tip screw driver perfect for any field box.
• 10 different size drive bits from
• 3-way gearless ratchet - forward, reverse and locked
• Rotating auto-loading barrell for 6 different bits
• Four additional bits housed in the durable polycarbonate handle
Phillips Bit Sizes: #00, #0, #1
Flat Head Bit Sizes: 1.5, 2, 3mm
Torx Bit Sizes: T5, T6, T8, T10
Works fine and is quite handy. Bits can be replaced easily, but the bit slot symbols are not changeable. The ratchet could have less resistance, especially since this is a tool for small screws. Also, the magnet is a bit weak causing the bits to stay in the screw head too often. Lastly - flathead? Seriously? Anyways, I'd recommend this for your crash kit if you have proper non-flat bits to spare.It actually works and is of reasonable quality. Time will tell how it holds up on the bench, though. The selection of bits is quite weak though - philips is ok, but flat and torx...? Fortunately they can be replaced, but its an extra cost. Still recommended though, for example for your crash kit.fabuloso muy practicoLoads neatly !! pull it out fully before rotating the change over ratchet