Hobbyking brings scratch builders our own brand XPS light weight foam board. Our foam board is very similar to Depron and is perfect for foam model construction.
Available in 3mm, 5mm and 10mm thickness and in 500 x 700mm and 1000mm x 700mm sheet sizes, this foam board is ideal for constructing 3D profile or scale subjects.
Each pack contains 20 pieces! providing more than enough foamboard to build your own personal airforce.
Dont forget that we can of course also provide everything else you will need for your foamboard project, from glue right through to motors, esc, batteries and servos.
Dimensions: 3mm x 500mm x 1000mm
Number of pieces: 20 sheets
This foam is very flexible and it doesn’t have a paper layer on each side but if you buy some wing tape and cover the foam then it is a very good foam for you homemade planesMine was 2.35mm thick average (20sheets measured 47mm) and totaled 970 grams for the 10m2. Feel almost the same stiffnes as depron and has a grain too.This isn't anywhere near as stiff as Depron. I was hoping that this would be a suitable substitute for the foam board used in the Flite Test designs but it has no paper covering and I'm guessing it will need to be either reinforced or used in double thickness to achieve the stiffness needed. At least there's plenty of it.Sheets are straight and well packed in a box.
Sheets flex more in length than width.
Recieved the 3x700x1000. Doesnt matter, ill just cut off 20cm so they fit in my CNC machine.