Who hasnt owned a cessna?
And at this fantastic price, who cant own two or three?!
This kit comes pre-built to around 90% completion. You will need about 3-4hrs to complete this model. Included is everything shown in the image.
Wingspan; 40.7in / 1033mm
Wing Area: 260.4sq in / 16.8sq dm
Flying weight: 1.45lb / 650g
Fuselage Length: 30in / 770mm
Engine Required: .15 / 400T Speed motor (Turnigy 28-22 1600kv)
Battery: 1300 - 1800mAh 3S1P
This Cessna flies much better then the 44 one sold on the next page. Im using the Turnigy 2209 26turn 1130Kv 15A with a Towerpro n20 Speed Controller, and a APC 9,6 prop. The plane has more then enough power, and gets 10 minute flights with the Zippy 11.1 1800 battery. Im also using the HXT900 9g servos, it requires a little bit of trimming getting them in, but they work great. It is vary easy conversion to electric flight with the supplied engine mount, but you will have to build some kind of battery support to hold the battery if you want to use the access panel on the bottom of the aircraft. This airplane is not for the beginner because its extremely fast and has a tendency to tip stall during slow flight. In the hands of an intermediate to advanced pilot the skies the limit.The Good plane for beginning, but necessary to complete. In packing little damaged fuselage though it is packed was well. The Wing is made bad, with defect.What kind of servo's did you used.. doe the plane comes with servo mounts at all?
Fransi just bought it