DYS XM10 10A Mini ESC OPTO w/BLHeli Firmware for High KV Motors
This DYS XM10 ESC has been specifically designed for the high KV motors of the small multi-rotors in mind. As well as using small high speed processors to get the size down the weight has also been keep down to 4.5g. Making this ESC an excellent addition to 120 or smaller size multi-rotors.
Another innovation is to twist the throttle signal cable to keep transmission crosstalk to a minimum. BLHeli firmware is preloaded to give excellent throttle response. Supporting refresh rates of throttle signal up to a maximum of 500Hz, which is compatible with all flight controllers. Also supporting ultra-high speed Oneshot125 and 3000Hz high refresh rate for fast response, better throttle linearity and making it the first choice for multi-rotor and racing frames.
A great choice for smaller frame multi-rotors. Designed with the DYS BE1104-4000KV motor in mind.
• Specifically for small Multi-rotors
• Specially designed to support high KV motors
• Fast processing speed
• Throttle signal is twisted pair cable, to reduce the signal crosstalk
• Miniaturized and ultra-low resistance MOSFET to improve efficiency
• Throttle lever travel and other settings are available to be set by USB linker
Throttle Signal Freq: 20-500Hz / Oneshot125 Ultra high speed
Continuous Current: 10A
Instant Current: 13A
Battery: 2-3S LiPoy
Dimensions: 23 x 12 x 4.5mm
good esc but had one that was badgreat little speedys . paired withsome 1104 4000kv mtorss
has oneshot so it will drop down faster when flying a multi-roto. goes great with the recommended DYS be1104-4000kv motor. and 3020 props