New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Gold Anodized Double Sided CNC Aluminum Tube Clamp 14mm Diameter

Gold Anodized Double Sided CNC Aluminum Tube Clamp 14mm Diameter

Discontinued Product

Please continue searching for a similar product.
SKU:
450000763-0
WANT FREE SHIPPING? Click here to find out more!

Gold anodized double sided CNC aluminum tube clamps, perfect for making your own DIY projects such as Multi-rotor frames, motor mounts and gimbals. Various sizes available and the hardware is included

*Note: Double sided can be bolted to a flat surfaceo n both sides of the clamp halves.

Specs:
Weight: 5.6g
Size: 26x17.5mm
Tube Diameter: 14mm
Mounting: 21mm center to center

Included:
Four clamp (two halves) and hardware

  • SKU 450000763-0
  • Brand -
  • Capacity (mAh) -
  • Shipping Weight 30.0000
  • Packaging Length 40.00
  • Packaging Width 25.00
  • Packaging Height 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A bit smaller than I thought by looking at the pictures, but they will fit my project perfectly.
Going to use these as frame mounts on a H-quad, probably three clamps per motor pair.

The screws included are about 4mm taller than needed to tighten the clamps, giving you plenty of room to add material both over and under the clamp.

They are decently machined, small drill shavings in all of the holes, but easily pushed through. No dents or other defects. I got three sets, 12 clamps in total.

I would not use these to clamp a motor down directly, unless you use 2 clamps per motor, or use less than a 15A motor. The bolts are 2mm, and larger motors use 3mm screws.
There is not enough room to widen the hole.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A bit smaller than I thought by looking at the pictures, but they will fit my project perfectly.
Going to use these as frame mounts on a H-quad, probably three clamps per motor pair.

The screws included are about 4mm taller than needed to tighten the clamps, giving you plenty of room to add material both over and under the clamp.

They are decently machined, small drill shavings in all of the holes, but easily pushed through. No dents or other defects. I got three sets, 12 clamps in total.

I would not use these to clamp a motor down directly, unless you use 2 clamps per motor, or use less than a 15A motor. The bolts are 2mm, and larger motors use 3mm screws.
There is not enough room to widen the hole.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking