A very neat heavy duty switch harness which can plug directly to batteries with an XT60 plug, it also has a charging socket built into the body of the switch which has a sliding cover to stop the ingress of muck and debris.With this switch it gives you the ability to charge the receiver battery in situ without disconnecting any leads or even disassembling the model if you do not want to. The switch is also fitted with a DSC lead (Direct Servo Connection) for radio outfits that have this facility. Suits Futaba and JR style equipment.
Length of Leads: 240mm
I purchased 5 of these switches because of their incredible value and components quality, wire, etc. They are very good but they could be better, hence only 4 stars. There are all the components to make the excellent but small details let them down. The switch has 4 poles, which is fabulous for high current, but only 2 poles are wired! I modified each one of my switches to utilize all 4 poles of the switch and am happy. If the manufacturers had taken a little more time to make the PCB connect all 4 poles it would be a first class product. It doesn't take much effort to modify it to use all 4 poles of the switch. I may even design my own PCB to fix the issue and purchase more of these. They are so cheap you could not buy the wire, connectors, switch, etc., for the cost.This switch really surprised me a lot. Wire are silicon wire and very high quality. I have no idea why I have spent so much money for futaba/jr/hitec switch. From now I will buy this switch. I hope it will last very long as branded company's switch, only time will prove it.Received 4 today,heavy duty ,thick wires,can be used in large planes 50cc and up,easily withstanda 10amp 8.4volts current