Total Price


Cart 0 Cart 0 Loading...

H-King Radjet 800 EPO 800mm (31.5") (PNF)

Generating Links

H-King Radjet 800 EPO 800mm (31.5") (PNF)


Now save save $0.00 $0.00

Shipped From:
  • USA
  • Global
  • EU
Already Purchased
In Stock
want FREE shipping? Click here to find out more!

Are you looking for extreme speed right out of the box? If so, we've got you covered. There is plenty of rad in the Radjet 800! With its amazing price, EPO foam, and being Plug and Fly, this brilliant model has no trouble earning the Radjet name.

The Radjet 800 has been tested and flown to within an inch of its life and it performed flawlessly, not only in terms of light performance but also reliability, and believe me, we tried hard to kill the test version! It's a simple build with the motor, ESC and servos pre-installed, even the decals are pre-applied! It has several impressively simple and practical features such as the plastic skid on the length of the underside of the fuselage that will protect your Radjet from the usual tears and gouges, effective cooling for the ESC and lipoly.

But, it doesn't stop there, oh no! What's it like to fly? Utterly brilliant! The light flying weight means that the outrunner motor gives tons of performance, the Radjet will pull massive loops and is capable of some pretty precise aerobatics, it's quick, no doubt about it but throttle back and it becomes a total pussycat, fly it like you stole it or glide around, either way, it's a hoot! So to sum up, it looks great, it's easy to assemble, flies brilliantly, is reliable, fast, and cheap...Radjet? You better believe it!


• "Plug and Fly" format, simply add your own radio system and batteries
• Open Fuse to allow battery placement well into fuse to allow for perfect CG
• Potent brushless power system pre-installed
• Tough EPO foam construction
• Bright colors for easy orientation in the air
• Digital metal gear servos pre-installed
• Easy assembly


Wingspan: 800mm
Length: 600mm
Empty Weight: 370g
Motor: 2010 1800KV brushless outrunner (included)
ESC: 20A brushless with BEC (included)
Propeller: 6x4 (2 x included)
Servo: 9g Digital Servos


4Ch transmitter and 6ch receiver (with delta/elevon mixing)
1300-1600mAh 3S (11.1V) 30C lipo battery

Please note: A copy of the building instructions is under the "Files" tab.

  • IC/2:Elec Electric
  • Wingspan(mm) 800.00
  • Length(mm) 600.00
  • H-King Radjet 800 - HobbyKing Super Daily
  • Radjet Abendrot bolzen RadJet 800 HobbyKing
  • Low inverted fpv rad jet
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

Marcolin | Verified Buyer

  • Quality
  • Overall
  • Value

Buon prodotto

Mar 16, 2022

Buon prodotto, pre assemblato, facile da assemblare,anche se gli adesivi tendono a staccarsi

Jonny Wild | Verified Buyer

  • Quality
  • Overall
  • Value


Mar 01, 2022

che dire ? il migliore mio jet ad elica guardate il video per tutte le info

william | Verified Buyer

  • Quality
  • Overall
  • Value

its really good

Feb 03, 2022

this model flies just like they say with the control settings mentioned.magic model!

william | Verified Buyer

  • Quality
  • Overall
  • Value

its really good

Feb 03, 2022

this model flies just like they say with the control settings mentioned.magic model!

VOiD | Verified Buyer

  • Quality
  • Overall
  • Value


Jan 29, 2022

Lovely plane, flies FAST and FUN!

pops | Verified Buyer

  • Quality
  • Overall
  • Value

ESC burned out before I got it into the air

Dec 29, 2021

The worst plane I ever bought

Who? | Verified Buyer

  • Quality
  • Overall
  • Value

Good ducted fan training

Dec 08, 2021

Went together easily. Difficult to get the battery far enough back, but essential for CG. Launched by catapult/ramp. Thought it far too dangerous to risk hand cuts from rear prop. Flies like on rails. Use plenty of expo and small throws.

Michael | Verified Buyer

  • Quality
  • Overall
  • Value

toller Jet Vorgeschmack

Aug 12, 2021

Fliegt stabil, sichere Starts aus der Hand, auch einfache Landungen.
Ich find das Pfeifen bei High-Speed sau stark.
Sehr flott und schöner Trainer für großräumigen Flugstil.
Die Aufkleber halten halt wirklich nicht. Die Ecken muss man nachkleben.
Im ersten Lockdown gekauft. Viel Spaß damit auch beim Wiesen-Fliegen. Ich schau immer wieder ob es ihn noch gibt falls es mal kracht. Dann kauf ich nach.

Keith | Verified Buyer

  • Quality
  • Overall
  • Value

Great Flyer but watch out for the death spiral!

Jun 18, 2021

I got a RadJet on a whim. I saw it was only £59 and I love a bargain.
The assembly was minimal just requiring the wings and fins gluing on.
I balanced mine with a 3S 1500 zippy compact.
The maiden went very well and with a firm hand launch it flies really well with the rcommended throws and a big bucket of EXPO.
After the maiden however the motor screws had come loose inside the model this was due to bad QA by Hobby King and no evidence of any locktite on the screws. Because the motor mount was inaccessible I had to cut a large hatch in the rear foam to get to the motor mounts and found the screws were loose and the mount had hardly any glue on it both were wobbly. COME ON HK !
However, all fixed up she continued to supply big smiles down at the flying field. It rips around quite quickly and really is a joy to fly on the stock setup.
Then came the day I took the model up really high to explore the stall characteristics. Deliberately I cut the throttle and pulled back on the elevator until the plane stalled. It very quickly entered a flat spin. I tried pushing down elevator.....No Dice.....Full throttle and opposite Aileron....Nope! I cut the power and let it spin into the ground. It was a proper death spiral and appeared unrecoverable. (Great Fun!)
No real damage just bent the nose so a few repairs and off we went! A club mate has now 3D printed a nosecone and new wing--tips for me and I'm waiting for some good weather to try these out. Apparently the wingtips should make it harder to stall.
So in summary,
A really great fun flying model let down by some quality control issues.

Andreas Klem | Verified Buyer

  • Quality
  • Overall
  • Value


Jun 13, 2021

Super Modell sehr zufrieden

Customer files
Radjet Instruction Manual Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!