The all new HK500 3D Helicopter.
Main components are water-jet cut carbon fibre and CNC milled anodised aluminium. Giving this helicopter a very strong yet light weight design.
The HK500 already includes what other manufacturers sell as ''upgrades'' such as alloy rotor head, tail assembly & carbon fibre tail boom.
HK500 3D Halicopter body & Shell
500 Series outrunner motor
Alloy case (as shown in image)
Specification.Length : 1114mmHeight : 228mmMain rotor diameter : 980mmMain rotor length : 430mmWeight of the kit : 1800gMain shaft motor gear ratio : 56:11
Motor : GL-WS-3648, 1100kvRequired.Gyro : GM730 or Head lock gyroServo : Standard Servo''s except for tail (tail servo may be smaller, such as 20~27g)ESC: 80ABattery : 6S1P 2200mAh 20C (2 * 2200mAh 3S)Your own 6ch TX & RXSpare Parts: Click herePS* We are aware that the photographer assembled the skids backwards.Available while stocks last.
I have the helico HK500 and I have a lot of problem with the rotor anticouple. Impossible to maintain it in the axis, even with different gyro. The back rotor always turns to the right. I have some copter (electric and thermal) and I have never had these problems. If somebody has a solution, to send I an e.mail.merci
email@example.com'ai l'helico HK500 et j'ai beaucoup de problme avec le rotor anticouple.Impossible de le maintenir dans l'axe,meme avec diffrents gyro.Le rotor arrire tourne toujours droite.J'ai plusieurs hlico(lectriques et thermiques)et je n'ai jamais eu ces problmes.Si quelqu'un a une solution,envoyer moi un e.mail.merci. ! . . ( ).Fr diesen Preis bekommt man in DE nicht mal einen 450er Heli. Ich bin mit der Preis Leistung sehr zufrieden.Alles ist gut verarbeitet. Und wenn man doch mal einen Crash hat kann man ja original Align Teile verbauen.price of the helicopter and very chip for 500 class,fly wtih 7 cell A123 battery,install standart servo and giro 401.fly very good.only problem with spare part at home.Hello, this is very good product, but there are some small defaults. I will flight with it next time and I will give you results.Fit and finish are impressive, flies well, plenty of power. For the money, this is one heck of a deal. As noted, instructions are assembly diagrams, but if you have built a heli before, no big deal.
the price of the helicopter and very good the bad and that cannot matter for the brasil due to the weight. 3499g
henrique massa - brasil -pernambucoManaged to fit a 7 cell A123 battery,
had to cut wider the battery slot.
C.G. is OK even with a full size tail
servo - JR 890G. Cyclic servos JR DS821
are slightly smaller than slots in the frame. ESC Turnigy Plush 80A, however
I guess a 60A ESC would be sufficient.
Everything ran smoothly when tested on
ground. Haven't flown yet because of the winter weather.I received the heli about a month ago , it looks like a Very good helicopter. In putting the heli together , I came upon items which should be addressed
1. the bolts which secure the Three full size (JR) servos are too short ,I got 2.5mm x16mm bolts
and locknuts local.
2. the forward fittings on the tail boom braces do not fit to the carbon side as they should.
Set up info.would def. help.
Has this heli ever flown?