-
Product
Description -
The Hobbyking super simple boat series comes with a limited range of programming functions and are designed to be plug & play.
A perfect ESC for those looking for something simple to use and economic.
Spec.
Weight: 107g
Size: 90x41x18mm
Cells: 2-7S Li Po
Continuous Current: 125A
Burst : 150A
Bec: No BEC (Opto)
Reverse: Yes
User Programming options.
Cell type / Voltage cutoff
Throttle (Auto / 1.1ms to 1.8ms / Hard / Soft )
Brake (No Brake / Soft / Medium / Hard)
Motor Direction (Clockwise / Counter-clockwise)
Timing Mode Setting (1 / 7 / 15 / 30)
PWM setting: 8K/16K
Reverse: No reverse / 25% power / 50% Power
Note:
This ESC is OPTO, with no BEC supplying power to your receiver. You will need an extra power source for your receiver. (such as UBEC or Rx battery pack)
-
Product
Specifications -
Additional Information
-
SKU:
HK-B125A
-
Brand:
N/A
-
Capacity (mAh)
No
-
Shipping Weight(g)
147.00
-
Length:
150.00
-
Width:
25.00
-
Height
65.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
The specs told me that this speed controller had reverse.
Purchased 2 of these.
Downloaded the manual only for it to have no options for reverse.
What can I do now?
Someone would know tell me if there is any programming card for this ESC, and if there is any way to get the instructionsHmm I wish I would have realized this was a brushless ESC from the picture. Just throwing that out there for anyone else that might be new to these things.Give me please ID of programming card for this ESC. It is very necessary for me. Will answer me please rather!Despite the description this ESC has no reverse functions.
It is now two weeks since I asked support how to programme the reverse options and I have had no useful reply.
They are even having difficulty on deciding on how to refund my money, since it is not faulty and cannot be returned under warranty.not worth it, overheat easy, need to seal i by your self because the water cooling system is not seal properly, would never get it againGot two of these esc both burned within 5 run on my Seafire boat with 3660sl 3060kv boat motor! First one I run it on 2cells in series to make it 4 cells it burned on my 4th run then I try the second esc with only 2x 3 cells in Parnell it burned on my 1st !!!!Bonjour ,
je suis a la recherche de la notice correspondante ,car les options ne correspondent pas a la notice.Autrement ce variateur fonctionne bien mais est impossible a parametrer sans notice exacteand this speed is not good, he marred the second battery with a 80A engine he could not stand outside it heats up a lotI bought one and it lasted 5 minutes. My motor clicks when I advance the throttle.. I swapped the esc and the motor works fine. I checked for crossed wires and all ok. Any suggestions appreciated . Alex -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesHobbyking HK-B125A ESC download now [123kb] 125AMP Boat ESC to complete download now [32kb] 125AMP Boat ESC to complete download now [32kb] esc 4s max 125a by david download now [105kb] No File Name download now [2kb]
- acc