HobbyKing® ™ X-Car Beast series ESCs offer excellent performance and features at a great price. With precise throttle linearity, smooth startup/acceleration, strong brakes and fully adjustable programming options, you will not find a better value in R/C car ESCs on the market today!
Built with high quality components, and offering both sensored and senorless motor operation, this 1/8 Scale 150A series ESC offers truly versatile and high performance that won't break the bank.
• Enhanced throttle response for excellent accelleration
• Uses advanced PC interface to set up or update firmware
• Uses both LED and LCD program cards
• Adjustable BEC output 6.0V/8.4V
• Multiple protection features including low voltage cut off protection, over heating protection and throttle/signal loss
• Compatible with NOVAK, LRP, ORION brushless motors
Continuous Current: 150A
Suitable Motor Type: 4 Pole sensorless and sensored brushless motor
Battery: 2 ~ 6S Lipoly 5~18S NiMH/NiCd
BEC Output: 6.0V ~ 8.4V adjustable/3A
- Blade Count:
Using it in an Associated RC8.2BE buggy and it fits perfect, using with 6 pole trackstar motor and 2-6S packs. Pros: best price | easy to setup. | waterproof | handles 6S packs | excellent low speed control cons: Fan noisey and rattles. Beware than the fan is vital to keep the ESC cool so be sure to keep sticks and leaves away from the top of the fan in case they stop it spinning. Ideally, fix a small square of fly screen wire to the top to avoid blockages. Overall the best value esc for high power up to 6S use.
What hall sensor did you use elhajoGewicht 164g inkl. Akkukabel (17cm 10AWG) Motorkabel (17cm 10AWG) Empfaengerkabel (29cm inkl Stecker) inkl Schalter mit Anzeige 9cm
Abmessungen Gehaeuse 66x48,5x37,5mmGood ESC.
I used two of them on an electric mountainboard for a year now. Together with two Aerodrive SK3 192kv motors.
On 5S the maximum current on that motor is only 80A, so I get only 1500W out of the motor with is plenty, gives me 3KW total.
Modified the motor with hall sensors for smoother acceleration and braking, works like a charm with this ESC.
Downside is that you can ONLY program it with a program card, not with the tx. But that seems to be the way to go with all the esc now a days.
Also drilled out the bottom holes to make a decend mounting plate.Buona sera,arrivato oggi e gia montato sotto un truggy ansmann terrier 2.0.,con motore tunirgy 2200 1750 watt 25 volt . Per il momento sembra tutto ok un mostro di potenza con 2 batterie 11,1 tunirgy . Molto presto vi faccio un recinzione completa.per il momento gli do il massimo..Using it with a Trackstar 1/8 1900KV sensored motor on Traxxas E-Revo 1/8.
Runs great! Using it with 4S (2x 2S) Wheelies down the street! Who needs front wheels?
The X-Car Beast series LCD Program Card didn't work right, so i've flashed it with the ZTW Gecko firmware and now it's all fine. It even added a extra drive function ( Forward/reverse). Been using it with 3.4V lipo cutoff voltage on Turnigy 2s 5000 60C Lipo's and had to put 3650Mah back in the batteries. Maybe i can use 3.2V cutoff to achieve the 80pcnt limit. So far i'm quite happy.This is a rebrand of ZTW 1:8 BEAST SS/SL 150A ESC. Although not specified this ESC is actually waterproof and has has 8,4V BEC! It's sensored so has good startup, actually it has the best startup of any sensored ESC I owned, so good that even on 6S you can use it as a crawler! I use it on a 1:8 truggy running 6S and 1900kV motor, and am very satisfied. It's running cool with extreme good startup and good brake behavior (does not lock the wheels on full brake but let's them spin a little and emulated ABS by doing so). Compared with my other "competition" ESC's it has better startup but when running it's not as smooth and seems to have lower efficiency (on TrackStar GENII i got 16min and on this ESC 13min run-time on the same track & same car setup) so I wouldn't recommend it for competition use. I would recommend it for bashing & heavy cars because of perfect sensored startup and fact that it copes very well with high power draws (large body and heat sink).
... Finally some negatives: quite big & heavy, programming only possible with programming card, 10 AWG wires with thick insulation so problems with fitting smaller connectors, LOUD (really loud) wine during crawl startup, works only with 4 pole motors.
Hobbyking setup download now [15720kb] X-Car Beast Series ESC 1:8 firmware download now [14.44Kb] manual.pdf download now [209.96Kb] Manual/Datasheet download now [209.96Kb]