Hobbywing EZRUN COMBO-MAX10 G2-80A ESC & 3652SD-4100KV G3 Brushless Motor for 1/10 Cars

Hobbywing EZRUN COMBO-MAX10 G2-80A ESC & 3652SD-4100KV G3 Brushless Motor for 1/10 Cars
Copy and Share the Below URL
Accessories
Special Price $1.42
You save $0.47
Was $1.89
Special Price $25.93
You save $9.68
Was $35.61
Special Price $22.05
You save $6.35
Was $28.40
Special Price $1.43
You save $0.48
Was $1.91
Special Price $17.68
You save $6.60
Was $24.28
Special Price $31.99
You save $9.20
Was $41.19
The Hobbywing EZRUN COMBO-MAX10 G2-80A ESC and 3652SD-4100KV G3 brushless motor offer strong, explosive power, linear low-speed control, and a great sense of control for your 1/10 RC car.
The 3652SD-4100KV G3 sensored/sensorless brushless motor has a high-precision Hall sensor that ensures the rotor position is always accurate, and consistent for excellent linear throttle control. The motor includes sealed high-precision, high-speed bearings for lower resistance, reliability, and improved water-proofing/dust-proofing (up to IP-67 standards). An improved cable interface also makes for better sealing against the ingress of water or dust, and the motor adopts a modular structure that allows for easy disassembly for maintenance.
The IP-67 standard means it is splash-proof, water-proof, and dust-proof under normal use, it has not been designed to be permanently immersed in water. The ESC offers a great sense of control feel and perfectly matches the 3652SD G3 range of motors. The ESC includes smart freewheeling technology and higher drive efficiency, which results in a lower operating temperature of over 25°C on previous versions. Another feature is the smart start-stop technology of the cooling fan, this allows it to only cut in when the temperature level rises beyond a certain level. Last but not least is the very effective capacitor overheat system that prevents ESC damage, this includes a built-in 2040uF capacitor module, which eliminates the need for cumbersome external capacitors.
So, if you are looking for a new motor, ESC combo for your 1/10 car, then look no further than the perfectly matched water-proof, dust-proof, highly efficient EZRUN COMBO-MAX10 system.
Features:
• Suitable for 1/10 cars and buggies
• Water-proof/dust-proof design up to IP-67 standards
• Built-in capacitor module for a neat installation
• Multiple built-in safety features
• Innovative intelligent freewheeling technology
• Powerful 6~7.4V 5A BEC system suitable for HV servos
• Highly efficient cooling system with start-stop technology
Specs (3652SD-4100KV G3 brushless motor):
Type: Brushless (sensored/sensorless)
KV Rating: 4100KV
Input Voltage: 2~3S LiPo (7.4~11.1V)
No-Load Current: ≤5.0A
Water-proof/Dust-proof: Yes (up to IP-67 standards)
Outside Diameter: 37mm
Length: 53mm
Shaft Diameter: 3.175mm
Weight: 227g
Specs (G2-80A ESC):
Type: Brushless (sensored/sensorless)
Current: 80A/520A (burst current)
Voltage: 2~3S LiPo (7.4~11.1V)
BEC Output: 6~7.4V@5A (switch-mode)
Cooling Fan: Yes (powered by BEC)
Water-proof/Dust-proof: Yes (up to IP-67 standards)
Motor Limits (2S): 6000KV
Motor Limits (3S): 4200KV
Dimensions: 53x39.5x37.2mm
Weight: 120g
Includes:
1 x Hobbywing EXRUN 3652SD-3300KV G3 brushless motor
1 x Hobbywing EXRUN G2-80A brushless ESC
Bandit | Download [2] |
Bandit | Download [2] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!