A high powered charger, capable of handling up to 200W or 10A charge rates. Lipoly, LiFe and Lilo compatible as well as able to charge up to 10 cell packs.
The iCharger is famous for its super-accurate balancing feature. Each unit is calibrated at the factory prior to shipping!
This is a quality precision charger.
Maximum charge power capacity : 300W (@ input voltage > 13.5V)
Charge current range : 0.05 ~10.0A
Discharge current range : 0.05 ~ 7.0A
Input voltage range : 10.0 ~ 18.0V DC
Maximum discharge power capacity : 30W
Maximum extern discharge power capacity : 280W @ 40V/7A
Current drain for balancing : <300mA
Balance accuracy : <10mV
LiPo/LiIo/LiFe : 1 ~ 10 series
NiCd/NiMH battery cell count : 1 ~ 25 series
Pb battery cell count : 1 ~ 18 series (2 ~ 36V)
Battery setup memories : 10
Intelligent temperature control : Yes
PC Connect : USB port
Weight : 410g
Dimensions (LxWxD) : 143 x 97 x 26mm
One copy of the User manual on CD
One pair of output alligator clip leads
One pair of input alligator clips (30A) and input leads with 4mm bullet connectors
One temperature sensor lead: 0 ~ 99°C (32 ~210°F)
Four rubber feet
One Mini-USB data line(1.2 meter)
Balance expansion board and interface cable to connect to the charger
Note: Power supply not included.
Sadly this product did not work out of the box using the power supply I'd previously used on my iMax6. It gives an error message 'LOW VOLTAGE'
I contacted livechat and they said I must use a 300watt power supply for this charger. It doesnt say that before buying!
This is counter intuitive if I am only charging a small LiPo 450ma at 100ma
It should only need a bit more than that from the supply.
So I tested again using the clips that are included, to attach to my car battery. (That can easily provide 1200watts !) But still the same error message.
I'm waiting for support to recommend next action....Excelente cargador, para todo tipo de bateras y excelente el monitorio para pc para monitorear cada celda de tu batera o la batera para tener un mas cuidado con ellas y una vida muy larga, puedes cargar hasta la batera de tu cocheThat is really the best charger I never had. Easy to use, good Balance (with 3s and 4s, I have only 3 and 4s). Lot of option. I'm loving it :) Using now about 6 month.ANGLNSKY NEUMM, ALE ZATM FUNGUJE SUPER. NA MNE JE TAM TECH FUNKC A, A. SOUSTREDIL JSEM SE NA VKON(VELK), VHA (MAL) A TUDI I NZK POTOVNBelow are the products you purchased in the last 45 days.
Help your fellow hobbyists and earn free points at the same time!
Excellent charger! I have a few iChargers already and over the years these have given the most reliable service. They are a level above other generic chargers as they give you more functionality within its neatly designed software interface, and have excellent backing with their warranty. With a proper voltage calibration option in the software, I have the confidence to continue to buy iChargers as I increase my fleet of chargers. Worth the extra expenditure for the reliability.I have two of these chargers. Not only are they perfectly functionning with real good performance, they also are 100pcnt reliable as I'm using them for approx. 2 years now.
I never had a charger bringing that much satisfaction. For me the best price/performance ratio ever.
Spend a little more money and get the quality charger. There are so many options on here I thought it would be confusing, but the first time I used it it worked great.Rien dire c'est un super chargeur!!mes nanotech 6s-5000mah apprecient la charge hyper rapide.Mais prvoir une alimentation en consquence.TRES BIEN HOBBYKING.Excelent Charger, the best!!!