Voltage Range: 6-10V
IO: 1 A
KV: 1920 RPM/V
Max Load: 16A/S
max Eff: 80%
Resistance: 78 ohm
Shaft Diam: 3.17 mm
Weight: 44 g
Recomended Model Weight: 200-500g
Number of Poles: 14 pole
Really satisfied with this motor. I'm using it on an acro model 580 grams, 3 cells 2200, 7x6 prop, Tpro N20 esc, 10% thickness profile.
Take off below half throttle, flying around one third. At full throttle it dries 15A, with speed unbelievable.
Usually landing temperature lower than the esc temperature.
I am very pleased with this little motor.
I installed this on a wildwing (hobby people) spinning an APC 5.5 X 4.5 (w/ towerpro 18A ESC and varios 3S ~2200 lipos). Motor always comes down about 90^F. Plenty of vertical, and 15+ min flight times. 7 X 4 props may be a little much my lead finger (motor gets hot)