OrangeRx GA400F Futaba FASST Compatible 4ch 2.4Ghz Receiver with RSSI and SBus

OrangeRx GA400F Futaba FASST Compatible 4ch 2.4Ghz Receiver with RSSI and SBus
Awesome!
Copy and Share the Below URL
The OrangeRx GA400F has all the properties and features of the original FASST compatible receivers but this one has 2 operating modes. Mode A gives the standard 4ch operation, Mode B gives CH1, CH2, RSSI and SBus. Another feature of this receiver is that it has "Normal Mode" and a "High Speed" mode. Normal mode is for standard analog servos and equipment and high speed mode is for digital servos. Do not use high speed mode for analog servos otherwise they will get hot and burn out.
The S.Bus functionality is an excellent feature for use with multi-rotor flight controllers such as the KK2.1, APM, MultiWii and others. These single line connections remove the weight and mess of additional wire leads for each individual channel. This is ideal for use on small frames where space is at a premium and keeps all the wiring neat and tidy.
RSSI (Receiver Signal Strength Indicator) is a fantastic feature to put through the OSD of your FPV rig. The receiver has a chip installed that is connected to the RSSI output which gives an analog signal that gets stronger the better reception you have.
The receiver will also accept a wide range of input voltages from 3.5~8.4V which is great if you want to use LV and HV type servos.
Compatible with the following Futaba FASST 2.4Ghz air systems such as TM7, TM8, TM10, TM14, 6EX, 7C, 8FG, 10CG, 12FG, 14SG, 18MZ etc.
Features:
• Lightweight (3.5g)
• Compatible with FASST 2.4Ghz air systems
• 4 channels
• 2 Output modes, Mode A and Mode B
• SBus and RSSI
• Normal and high speed modes
• Compact design (37 x 18.5 x 5.5mm)
• Failsafe and battery failsafe
• Improved anti-interference capability
Specs:
Type: GA400F
Input Voltage: 3.5~8.4V
Battery Failsafe Voltage: 3.8V
Dimensions: 37 x 18.5 x 5.5mm
Weight: 3.5g
Note:
All OrangeRx receivers come with a 12 month warranty. This is not a Futaba receiver, nor is it a copy of a Futaba receiver. Futaba and FASST are trademarks of Futaba Co (JP).
Falcogeorge | Verified Buyer
-
Overall
-
Quality
-
Value
Brilliant
Jan 17, 2021
Guille | Verified Buyer
-
Overall
-
Quality
-
Value
Dont work
Dec 30, 2020
Claudio | Verified Buyer
-
Overall
-
Quality
-
Value
Good little rx
Oct 09, 2020
Buy-N-Fly | Verified Buyer
-
Overall
-
Quality
-
Value
Great receiver for small planes
Sep 22, 2020
Fizzy | Verified Buyer
-
Overall
-
Quality
-
Value
Great little receiver
Sep 15, 2020
Jp | Verified Buyer
-
Overall
-
Quality
-
Value
Works great
Dec 11, 2019
Jano | Verified Buyer
-
Overall
-
Quality
-
Value
It took too long to arrive and it is just wrapped in plastic without a case to protect it. There was only a short instructions page andthere are no clear information on the 6 conectors. What is the power connector?? on
Sep 09, 2019
Philippe | Verified Buyer
-
Overall
-
Quality
-
Value
récepteur
Jun 12, 2019
WW | Verified Buyer
-
Overall
-
Quality
-
Value
Tiny and powerful.
May 26, 2019
Pedro | Verified Buyer
-
Overall
-
Quality
-
Value
Excellent!
May 20, 2019
MANUAL | Download [92] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!