Upgrade your Quanum DIY FPV V2 Goggles with this V2 add on kit. It incorporates many new features that you have all been asking for and will effectively bring your V2 Goggle set up to V2Pro specs at minimal cost.
A new, clear acrylic three lens set (1X, 1.25X or 1.5X magnification) and lens frame adapter providing a superior improvement in quality over the previous fresnel lens set.
A battery pouch with velcro flap and buckle has been added and is excellent for mounting your battery on to the goggle's headstrap (behind the user's head) and will take a battery up to 77mm x 35mm x 22mm.
An EVA foam adapter for mounting a smartphone onto your goggles will turn your V2's into a Virtual Reality headset for gaming etc. Recommended for smartphone sizes up to Samsung Galaxy S6. Smartphone ports are accessible on the ends and the V2's neoprene glove front straps will hold it in place.
Extra comfortable sponge rubber strips with double sided tape have been added for extra cushioning when wearing the goggles and are simply cut to size to match the users requirements.
• New clear acrylic lens set and frame (1.0X, 1.25X and 1.50X magnification)
• Battery pouch
• Metal “S” loop for top strap adjustment to improve wearer comfort and fitting
• Extra comfortable sponge rubber cushoining strips for facial comfort
• EVA foam adapter for smartphone for mounting
• A set of extension/conversion cables including:
a) 3.5mm female phone jack to 2.5mm male phone plug adapter
b) FPV DC jack to 1x5521 DC plug, 2x3315 DC plug (Length = 350mm)
c) 3.5mm phone female to RCA male cable (Length = 150mm)
d) XT60 male to FPV DC jack (Length = 210mm)
e) 3.5mm phone female to RCA female cable (lenght = 150mm)
Note: A set of modification instructions are located in the "Files" tab below showing the alternate mounting method for the goggle monitor allowing for an increase in focal plane length.
Also available for use with this product:
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Urban Digital Cam)
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Black/Red)
Quanum DIY FPV Goggle V2Pro Upgrade Glove (Fluro Pink)
What I really need was the lenses, after usign couple of them and putting screeen on the outside, I even can't focus, so I used the old frame for fresnel lenses to put the third acrylinc lens inside the goggles. It works very well, now I can focus. If you have the original V2 this kit is a must.Nice upgrade, comes with acrylic lenses instead of the plastic lenses included in the original goggles. It also comes with a battery pouch and longer cables that can be mounted to the back of the head strap to help offset the weight of the goggles. Definitely a must have for anyone who purchased the original goggles.i know you just want just "acrylic lens". last of all is just garbage.
but that "precious" acrylic lens dosen't fit to quanum v1 goggle. cuz acrylic lens is too big for v1 goggle.
so this kit is useless to v1 goggle user. you better than buy v2 goggle.
quanam is very bad business brand. they make user to waste money.Well yes, the lens are good, and the 2.5 to 3.5 mm os also an add-on. but the rest.. nope i don't need.This kit is uselss, impossible to get a proper focus, image is totally blurred and it's very tiring for thr eyes.
Putting back the plexi lens.
Too bad, because, that was the only interesting thing in the kit.
All the rest is useless to me.
Pretty disppointed.this is well worth the money. image a lot clearer. buy this and the new glove....feels like a BRAND NEW SET OF GOGGLES. would highly recommend.Not impressed at all.
As I've already got the updated sock I didn't need the "S clip", The battery pouch, Or any of the cables. I only bought this for the lenses and holder.
Even with the two most powerful lenses sandwiched together it's not even as big an image as I was getting with one fresnel lens. These lenses also add a fair whack of weight to the setup.
Next problem is when you take the goggles out of your bag and put them on your warm face. It only takes a few seconds for condensation to start forming on the lens. They have so much thermal mass that they stay well below the raising temperature of the air in the goggles. Coupled with the moisture from your skin, The lenses mist to uselessness like warm breath on a cold window.
I was quite excited when these went on sale, And grabbed it for 6 and a bit quid....... Now I've got them, I feel like it was a total waste of money.
The individual parts of this kit feel reasonably well made, But that's no consolation when it doesn't work as well as the "Lower quality" stuff it's supposed to be replacing. :(
I could not focus. Display need to be 2-3 inches further out for me to focus with provided lenses. I made a balsa display extension that made it work for my old eyes. I provided pic in files tab. I love it now that my eyes can focus properly. I have about 3 flying hours on it so far.c'est surtout pour les lentilles que j'ai passé commande !!! les lentilles n'ont rien a voir par rapport au precedentes mais je suis deçu je ne peut meme pas les essayer car elle ne rentre pas dans la lunettes avec le cadre plastique elle sont trop grande !!!!! seule elle passent mais pas avec le cadre donc il me reste la solution de les collée au double face sur l'ancien cadre pas top!!!
j'ai quand meme essayer a blanc elles sont nettes mais aussi bcp lourde ce qui va rajouter du poids encore sur la tete il va falloir aussi que je recule l'ecran (j'ai des lunettes de vue ) car impossible d'avoir l'image nette meme en conbinant 2 lentilles seulement en reculant l'ecran de qlqs cms c'est bcp mieux reste a trouver la bonne distance definitive
apres c'est pas trop grave non pour le prix cela vaut le coup c'est les joies du modelisme il faut savoir s'adapterDi sicuro molto meglio della lente di fresnell per cui questo kit e' costruito e destinato alla sua sostituzione. Ottimo
V2 Add On Kit Manual download now [489kb] V2 Goggle Add On Kit Monitor Adapter Ins download now [716kb] V2 Add On Kit Manual download now [489kb] QuanumDisplayExtension.jpg download now [340kb] Using old frame to install 3 lenses download now [851.42Kb]