Quanum Outlaw 270 Racing Drone Frame Kit
As expected, Quanum have built an exceptionally high quality, durable frame Kit for their Outlaw 270 Racer. The construction is of a durable one piece, top and bottom carbon fiber sections that improves handling and crash resistance. The bottom section can be fitted with an aluminum exoskeleton for even more rigidity. The frame has outstanding propeller clearance and easily swing 6" propellers without extension arms.
The carbon fiber front camera mount can be tilted to an angle to suit your aggressive flying angle.
The kit comes with a Power Distribution Board fitted with an XT60 connector and a BEC with an on/off switch for the supplied LED strips.
Adding all your own gear to this frame will give you all the performance and reliability that you require. This is all you want in a pro level kit.
• One-piece Carbon Fiber Bottom Frame (3mm)
• Aluminum Exoskeleton for extra rigidity (optional)
• One-piece Carbon Fiber Top Frame (1.5m)
• Lean back Carbon Fiber front camera mount (adjustable)
• Can use 6" propellers
• Power Distribution Board & BEC with on/off switch for LED Strips (included and pre wired)
Frame Kit Specs:
Materials: Carbon Fiber
Size: 305x305x58mm (without legs)
Dry weight: 255g
1 x Quanum Outlaw 270 Racer Frame Kit
1 x Manual
4 x 2206 Motors
4 x 20A ESC
1 x Flight Controller
2 x CW 6" 6030 propellers
2 x CCW 6" 6030 propellers
5~6ch control radio and receiver
1300~2200 3~4s battery
FPV gear optional
This Body Frame is all you need to start a great build. She is just the job for that little project. Fit up to a 22XX motor with up to 30amp ESC. It come with a holder with a camera an all the hardware you need to build.The metal braces cause more problems then they are worth. They add extra weight and when you crash they cause the bottom plate that they are supposed to strengthen to break. Good flying frame as long as you don't crash. Recommend building without the metal braces if you buy this frame.Top quality finish, Nice job HK. The carbon fiber is of excellent quality and finish. Very well packed with good instructions. The frame without the Aluminum Exoskeleton weighs 186g and with the Aluminum bits on 239g. Overall a very nice looking quad and of excellent quality.