This Sbach 342 is the perfect model for beginners to 3D flying or for those that just want to sharpen their flying skills.
Precision cut by CNC from EPP this model is tough and durable enough to take enormous punishment and still keep flying. It is also easy to assemble and can be ready to fly in under an hour.
The Large flying control surfaces and airfoil shape wing offer great control authority for aerobatic and 3D maneuvers. The ailerons and elevators come pre hinged keeping building time to a minimum
The 1000mm wingspan is the ideal size for transport on the backseat of the car and finished in an eye catching colour scheme it will make an impress on every level when flying.
• Tough, light weight EPP construction
• Easy to assemble
• Easy to transport
• Great flying performance
Wingspan: 1000mm (39.37inches)
Length: 990mm (38.98inches)
Flying Weight: 460g (approx.)
Required (Not included):
Radio equipment (4 channel minimum) and servos
2830 1000kv motor or similar
ESC 30A (depending on motor selected)
3S 1500mAh Lipoly
Weight 500g model. But the fuselage is very flexible. The air is strongly bend the wings. The elevator broke in the air after 10-15 flights. Much better than the HUMMER, REACTOR, but need for 3D rear CG. To fly 3D well need to enhance Carbon, replace loop.I bought this with it's sister the Shining and the both have the same problems. Great flying beginner 3D plane, and works as a slow acrobatic trainer at low throws. The design of the ESC and battery openings makes the nose rip off with a prop strike, which is unavoidable due to the laughingly pathetic landing gear wire. I suggest using some real music wire and bending a replacement before installation, and some carbon fiber rods in the nose through to under the wing. Other than those problems a nice plane. Needs 200W motor at least to make it perform.