-
Product
Description -
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival, but surpass the quality of many leading motor manufactures on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.
Specs.
Turns: 26T
Voltage: 2~3S Lipoly
RPM/V: 1130kv
Internal resistance: 0.120 Ohm
Max Loading: 13A
Max Power: 125W
Shaft Dia: 3.0mm
Bolt holes: 16mm & 19mm
Bolt thread: M3
Weight: 44g
Motor Plug: 3.5mm Bullet Connector -
Product
Specifications -
Additional Information
-
SKU:
SK3-2826-1130
-
Brand:
No
-
Shipping Weight(g)
114.00
-
Length
110.00
-
Width:
45.00
-
Height:
80.00
-
Kv(rpm/v)
1130.00
-
Unit Weight (g)
44
-
Max Currents (A):
13.00
-
Resistance (mh):
120.00
-
Max Voltage(V)
11.00
-
Power (W)
125.00
-
Shaft A(mm):
3.00
-
Length B (mm):
26.00
-
Diameter C(mm)
28.00
-
Can Length D(mm)
12.00
-
Total Length E(mm):
40.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
Has plenty of torque for a small motor. if you want a motor for a small glider, quad copter or small plane, I recommend this motor.These are nice motors. I bought 3 of them a year ago, and have been happy with all of them. My favourite prop for these has been a BlueBird 9x6E, basically equivalent to the APC 9x6E. (Note that this is NOT the SlowFly prop, although the 9x4.7SF is also decent.) With 2200 mAh, 25C, 3S LiPo and 15A to 18A ESC, one of these will haul 25 oz (700 g) around the sky with authority. Search YouTube for "flying over Rouge Beach" for one example.Very good motors, used on quad. everything needed in the box. Just choose your mounting.
A bit of equilibration and done. Multicopter flies superbly with flips. 9x6 props give largely enough thrust. Loops and Rolls.Engine very well balanced. Hardly needed to be balanced. I bought 5 engines and only one required a little adjustment, if you are too picky, otherwise do not require adjustment. Makes very little noise. Undecided what propeller to use, but probably 8" once the engine has a max load of 13A.Very good little motor. Got 4 of them form my quad. Very lightweight, very powerful. Feels more then 125w.Got these for a quad 450. shiny stainless /chrome appearance. Very smooth and responsive with 30a blue series esc (sim.k firm.). Just warm after 10 minutes flight.Comes with prop adapters but you'll need 3mm mounting screws.
Noticed Motor spins freely and smooth with gentle flick before flight (cold), after flight (warm ),motor wont spin as well. Bearing well lubed with scorpion motor oil. Not sure if its bearing issues ,still very quite and smooth in flight.I have 8 of these motors on two quads. A couple of them seemed like the bearings were a bit rough at first and they were noisy when running. After a few hours flying time they seem to have smoothed out. Plenty of power using 8x4.7x3 props. I have tried running 10x4.7 two blade and they fly great, but seem a bit warm after an 8 min flight. Quad is more responsive with the 8x4.7 three blade. Hovers at half throttle with both size props. I have some 9x4.7 two blade on the way and will update as to how these work. So far so good. I am running the HK SS Series 18-20 amp ESC and they work fine with this motor. I like the bolt on prop adapter that come with the motors. I have crashed several times with no motor or shaft damage, even though I broke all the blades off the props. I will buy these motors again for my next project. It's going to be real hard to beat these for the price.Value plusplusplus! Very smooth acceleration. Very professional in all aspects at a price not really different from the rest. Comes in a sleek black foam padded box along with prop adaptors for whatever end you want to drive your prop from. Gold plugs come already attached so no faulty motor fear from soldering plugs yourself. Spoil yourself!These motors are excellent. I bought 5 of these (4plus1 spare) for a quad copter and the 4 I used worked perfectly and consistently. the bearings are smooth, and stayed that way after about an hour of various flying indoor and out in the cold and snow. The insulation is a bit thin though, and one of the wires of one of the motors got knicked in a crash. Still works though ;) I use these with the cheap plastic 8x4.5 props, they work well.This is my first aerodrive sk3 motor. I have bought other turnigy motors, but this is the best one I got. Well machined, it's exatly the weight declared. I put it in my acrobatic Oxalis , and you can't almost ear it when it turns. No vibrations at all. I will get a bigger aerodrive SK3 for my Great Planes Spitfire. -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filesDrawing download now [85.91Kb]
- acc
-
-
Turnigy Aerodrive SK3 - 28-XX Spare Accessory Pack
Starting from: $5.22 $5.41 -
T-Prop Adaptor Set for SK3 Motors (Direct Bolt)
Special Price $0.99
You save $9.07
Was $10.06
-
Turnigy Aerodrive SK3 2826 Series Replacement Shaft Set
$1.14
-
Combine
essential items and
Related Products
T-Prop Adaptor Set for SK3 ...
Special Price
You save $9.07
Was
