Turnigy Bolt series high voltage lithium polymer batteries are here, ready to bring out the next level of power to your high performance model. Turnigy Bolt batteries are built to the absolute highest of standards to provide competition level performance. With features such as gold plated balance leads, silver plated discharge wires and a reformulated matrix to allow you to safely charge them up to 4.35 volts per cell! These batteries are simply unmatched by any other in performance and build quality!
In addition to the higher nominal and max voltage, they are engineered to take high C rate discharge up to 65C continuous. Basically what this means is that these batteries will provide more power in your machine especially during high current draw maneuvers, and they will provide a longer cycle life due to the lower operating temperatures of the pack.
Top notch performance and build quality make these packs ideal for high-demand flying such as 3D helicopters, EDFs, F3A and any other high current draw applications. Each pack is built with heavy duty flexible silicone wire leads and a pre-installed connector ready to handle all you can throw at it. The great thing about the Turnigy Bolt batteries is that you can charge them with any standard lipo charger for basic use, they will simply perform like a standard pack. When using the proper charger such as our Turnigy Neutron chargers, which is designed with special protocol for these LiHV batteries, you can unlock the full potential of the Turnigy Bolt batteries.
More than just a fancy name. TURNIGY Bolt series lithium polymer batteries are built with a LiCo nano-technology substrate complex and an all new CNT (carbon nano tube) additive greatly improving power transfer making the oxidation/reduction reaction more efficient, this helps electrons pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rate than a similar density lithium polymer (non nano-tech) battery.
LiHV stands for “High Voltage Lithium Polymer”. These batteries have been around for years and can be safely charged to 4.35V, higher than the typical voltage of Lipos.
The advantages of LiHV batteries are the higher power and longer running times. LiHV batteries can be charged to 4.35V per cell, higher than normal LiPo batteries which sit at 4.20V. For example, a 4S LiHV pack charged at 4.35V would give you 17.4V. Whereas a Lipo battery on the same charge would only get 16.8V. LiHV batteries also have a lower internal resistance and are less prone to "puffing".
For those that love graphs, it means a straighter, longer curve. For pilots it spells stronger throttle punches and unreal straight-up performance.
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, Turnigy Bolt series LiHV packs are the real deal, delivering unparalleled performance!
• Higher charge voltage than standard lipos
• Super high 65C discharge rate
• Perfect for high performance models
• Higher capacity than comparable size packs
• Heavy duty silicone wire discharge leads
Voltage: 4S / 4 Cell / 15.2V
Discharge: 65C Constant / 130C Burst
Balance Plug: JST-XH
Discharge Plug: XT60
Unit Weight (g)
Max Charge Rate(C):
What they don't tell you in the description is that they are only good for maybe 30 cycles, at which point they are massively puffy and voltage saggy. Only been using them less than 2 months and I'm about to throw out all 6 of themFirst of all, these are the only batteries I have ever used. I am a new pilot and I currently have three of these bad boys. I know I am not the best person to be reviewing these batteries because I cannot compare them to anything else. What I can say is that they pack a serious punch. I am currently using a 210 size frame with 5-inch Lumenier butter cutters and 2204 2300kv cobras. With these batteries, the drone SCREAMS. I have had these batteries for about three months now and they have a lot of cycles on them already. I always balance charge them and I put them in "storage" overnight. I have not had any puffing issues yet. Overall, I am very satisfied with this battery!1 Pack failed 1 pack puffy warranty replaced failed pack only 5 charges so far so good on replacement still may use for racing great power for whole race no drop offAfter 3 months with around 3 cycles a week the battery just have so much voltage sag. I got 5 infinity battery's from banggood that has almost none until time to land...its just disappointing because I ordered 10 of them. I would stay away from them and spend a dollar or 2 and get a better battery.DO NOT RECOMENDED!!!
Order six packs. Charge cycle 10-15 times on Revolectrix GT500.
Now all going to big puffy and completely not work.
- Charging from 3.3V to full 700mAh (instead of 1300)
- When you gona fly voltage immediately going down. I can fly only slow mode and only 1-2 min.
SPRF3 Littlebee20A EMAX 2205/2300 DAL prop 5040 triblade.
So. I will newer buy this brand anymore!!! AND PLEASE DONT BUY YOU TOO!!!!Not great not horrible. The power they provide with minimal sag is in the beginning great, but they seem to puff no matter how well they are cared for. I bought both 1300ma 4S bolts and Nano-techs and the Nano-techs have not puffed as much. I really wish I hadn't bough so many of these batteries.Update. After just about 10-12 cycles all 4 of my Bolts are buffed and can not hold voltage. Waisted 100eur. HK does not compensate because the warranty period is just a month. Bolts were never abused to mishandled in any way.I purchased 4 of these batteries and they have some really nice power to them. However, I am a little disappointed that one of my packs is starting to puff already after about 6 charges. I have been using a Accucel-6 LiHV charger which I charge at 1c and I never go below the recommended voltage per cell. Hopefully they still last a while with some puffing going on.Very good 4S battery with many power for my 250frame droneI am very impressed with these 4s batteries. They have much more punch and flight time compared to ALL other 4.20 cell batteries. Be sure to utilize a LIHV charger or buy an affordable unit like the Accucell S60 so you can charge the cells to the full 4.35 volts. My only complaint is that they do show signs of more physical puffing than my other batteries and they tend to voltage sag below 3.80 volts per cell. I prefer to switch out batteries once I have reached 3.8 volts per cell to reduce puffing and voltage sag.