Turnigy nano-tech 1300mAh 6S1P 25~50C Lipo Pack (450 helicopter HK/Trex/Rave/E4 etc)
Turnigy nano-tech 1300mAh 6S1P 25~50C Lipo Pack (450 helicopter HK/Trex/Rave/E4 etc)
Copy and Share the Below URL
This nano-tech pack is designed for use in 450 class helicopters such as the HK450 PRO, TREX450 PRO, Rave 450, Beam E4 etc...
It fits the HK450 PRO perfectly without any modification necessary to the battery tray or canopy!
By running a lower KV motor (around 1700KV), you can achieve longer flight times and extremely high performance (when compared to a standard 3S setup) due to the increased efficiency of a higher voltage setup in your 450 class helicopter!
More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious performance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Spec.
Capacity: 1300mAh
Voltage: 6S1P / 6 Cell / 22.2V
Discharge: 25C Constant / 50C Burst
Weight: 206g (including wire, plug & case)
Dimensions: 104 x 34 x 29mm
Balance Plug: JST-XH
Discharge Plug: XT60
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
-
Capacity (mAh) 1300.00
-
Discharge(c) 25.00
-
Max Charge Rate(C) 5.00
-
Length-A(mm) 104.00
-
Height-B(mm) 34.00
-
Width-C(mm) 29.00
Mark-Temba | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
May 18, 2016
| Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Apr 14, 2016
Reverend | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Feb 22, 2016
pilotoheavy | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
May 07, 2015
| Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Nov 04, 2014
gouki74 | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Oct 04, 2014
Marek | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Sep 14, 2014
Rich | Verified Buyer
-
Overall
-
Quality
-
Value
Customer Rated
Nov 21, 2013
NoWhereFast | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Oct 06, 2013
WTWUK | Verified Buyer
-
Overall
-
Quality
-
Value
Certified Buyer Rated
Aug 20, 2013
