More than just a fancy name. TURNIGY nano-tech Lipoly batteries were designed from the ground up with serious peformance in mind. Utilising an advanced LiCo nano-technology substrate that allows electrons to pass more freely from anode to cathode with less internal impedance. In short; less voltage sag and a higher discharge rates than a similar density lithium polymer (non nano-tech) batteries.
For those who love graphs, it means higher voltage under load, straighter discharge curves and excellent performance. For pilots it spells stronger throttle punches and unreal straight-up performance. Excellent news for 3D pilots!
Unfortunately with other big brands; numbers, ratings and graphs can be fudged. Rest assured, TURNIGY nano-techs are the real deal, delivering unparalleled performance!
Voltage: 2S1P / 2 Cell / 7.4V
Discharge: 35C Constant / 50C Burst
Weight: 139g (including wire, plug & case)
Balance Plug: JST-XH
Discharge Plug: XT60
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Unit Weight (g)
Max Charge Rate(C):
Low price get quality. I use nothing elsBought 2 of these batts for the 1/16 Nitro Circus MT and THEY FIT !!!
It is a very tight fit, lengthwise, you have to squeeze them in a little, but it's ok, and the width is perfect.
They came perfectly balanced, provide a very long run time for the 1/16 Nitro MT (over 90 minutes, with lights on) and have a good punch.
Highly recommend them, will buy more.High Quality very good~~cracking battery nice thick cables xt60 plug securely attached its excellent. ran for a whole weekender (3 day, 72hr event) used this inside a standard (re-greased) CYMA RPK74 , metal and real wood kind. lots of heavy suppressing fire all throughout the weekend in semi and auto bursts and long 110 round bursts, it had a volt checker on it, the beeper thingy only started going of on the sunday morning on semi and the long bursts during the final defence. it was unplugged from the weapon and the checker was removed during sleep periods (10pm-6am).
all in all it delivered what i needed for the toy to work perfectly no sluggishness from volt drop or any real rof loss when it did start to beep. iirc i went though about 2 and half 3k bottles of 6mm bb's that weekendBest battery value out there, only brand I use.Not a bad battery, I've used them in rc tanks and quads both. Neither gave an issue. I would however pay the extra $5 more dollars and get the Turnigy Heavy Duty 120C version though.have 4 of theses now 2 in a 50cc extra as RX batteries. Have a power box sensor switch these batteries are powering! Thanks a lot HK!great batteries as always !!! ive never had any problems with nano tech batteriesJust got 2 of these for my RX/ servo batteries. Great lipos ! Thanks a lot HK :)Very good quality battery. Good silicone wires. Power wires 12AWG and 100 mm long.
Weight of my battery: 132g (including wire, plug & case)
Dimensions of my battery: 116x34x17mm