United States
Shipped From:

Turnigy TR-V7 1/16 Brushless Drift Car w/Carbon Chassis

Turnigy TR-V7 1/16 Brushless Dri...

For those of you looking for the ultimate 1/16 drift platform, the TR-V7 is here! 

With features such as a full carbon fiber chassis, beautifully finished body, brushless power system, shaft driven 4WD, alloy shocks,...

Now save save $0.00 $0.00


Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


For those of you looking for the ultimate 1/16 drift platform, the TR-V7 is here! 

With features such as a full carbon fiber chassis, beautifully finished body, brushless power system, shaft driven 4WD, alloy shocks, fully adjustable suspension and hard compound drift tires, the TR-V7 will be sure to please!

The TR-V7 offers many tuning options such as adjustable camber & castor, shock mounting positions and spring tension. This allows you to dial in your handling for any course!

This model comes almost ready to run, with its pre-installed 5500kv brushless motor, 25A ESC and 9g steering servo. This means that you will only need to add your own 2CH radio system and your ready to race!

It has the looks of a mean drift racing machine and the performance to back it up!

Motor: 5500kv Brushless Inrunner (370 size)
ESC: 25A Brushless
Battery: 2S LiPo (102x22x36mm MAX SIZE) w/ XT-60 connector [Required]
Servo: 9g Micro
Traction: Full Time 4WD
Length: 250mm
Width: 185mm
Height: 100mm
Wheel Base: 174mm
Groung Clearance: 7~8mm
Weight: 505g

ARR TR-V7 Drift Car
Extensive Decal Sheet

2S 1000~1300mAh LiPo
2CH Radio System (Rx/Tx)


Additional Information

  • Blade Count:
  • Diameter X(Inch):
  • SKU
  • Watt Hour
  • Weight(g):
  • Length:
  • Width
  • Height

Write Your Own Review

Only registered users can write reviews. Please, log in or register

great quality drift car, very strong and RELIABLE, pot your radio and battery and go!!!!!
Very good little drift car. Good quality. Very powerfull brushless inrunner. Good handling. I recomended it for first drift car :)
ok over all looks its a awsome car here we go
i got the car with the rubber street tires after a few days of off and on just running around i seen one of the blue sleeves on the rear out drive of the diff slipped off so i go to slide it back on i look in where the dog bone slides in i see the plastic out drive is half way striped out so now in looking for a way to go steel out drives but for the price its a great deal hands down
this car scuks it broke the frist hour i drove it's axle broke in pices it was so disopointing i was about to the it away
I brought 2 at the same time. Both my mate and I have had a great run. On the first night of play we both put atleast 4 packs (thats nearly 2hrs) thru them each. It could do with some gear kits to over gear the rear to make drifting easier. But as an all round car or even an onroad car. It works really well. The only problems we have had are the plastic diff gears. We brought a couple of sets of each front and rear and spare spur gear. When we ordered a 3rd one for another mate. We are using tiny little 2cell 1300mah lipos. And still getting 20-30mins. Also we are using the HK 2ch pistol radio. For the price you cant go wrong.
supi wagen gute verarbeitung kleiner flitzer
this is a good rc car, it support crashes and jumps, but the differential SUCKS! please hobbyking make a metal differential i change the plastic differential 4 times, i need metal!, please and about the motor and esc is good, i had some problems but not a big deal, is a good car, but buy it with differential spare parts!!!!!!
Programmed the ESC with the Turnigy 35A Car ESC Manual (TR35A-V2) found on files tab. Drive train is quite stiff and causes the motor to run at 80degrees after 5 mins run time. Needs a pull down, ajustment & lube to improve the drag. C/F chassis is very nice and it came stock with alloy dogbones, not plastic. 2S 1300mAh LiPo fits great with long run time. With some tweaking, this is a great little car.
I love this car, its a bit smaller than I had expected, I had thought it would be the same size as the hobby king rally cars but its smaller.
it drifts from a stand still straight out of the box and handles very well
Im using the 1700 mah 2s batteries recommended for the Monster Beetle, 2s is more than enough power for this car and these batteries just fit length ways without modification
very nice not so little car!!

Mine works well also in reverse and has plenty of power with a 1500 mah nanotech 2s (will fits also an higher mah battery)
if you buy it be sure to take also the alluminium dogbones (the plastic ones can broke easily) and antenna.

i am using it with 3channel HK radio

Little mods to let it works better are on youtube.
For the idiots and completely unknown to world of rc cars like me remember to leave the plastic film on the body BEFORE attach decals

I think it's worth the money
View all reviews
  • 1/16 Drift Car

Upload video

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.