Register

Product Finder

Settings

Useful links

 
[["US","AU","GB","DE"]]
Register
Shipped From:
  • Global

Turnigy Voltage Protector 550000uf (1.4sec)

Turnigy Voltage Protector 550000uf (1.4sec)

QTY:

Now save save $0.00 $0.00

$5.05
Rating:
Stock:
Weight:
35 g
SKU:
VPCAP33

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

The TURNIGY capacity set helps prevent "brown outs" resetting your Rx if your servo amp draw spikes or you have an Rx glitch.
It will also help reduced the load on your ESCs BEC and reduce the likelihood of glitching. Simply plug it in to any spare channel on your receiver.

Operating Voltage : 3.2V - 11.1V (1s ~ 3s LiPo)
Capacitor voltage: 15v
Storage Capacity: 550000uf
Weight: 18.5g (including heat shrink covering and wire)

Data on a 3A load spike typically seen when large retracts jam:
Supply 6v with a voltage drop to 4.7v over 0.5sec
Supply 6v with a voltage drop to 3.0v over 1.4sec (3.0v minimum voltage of the OrangeRx 6ch)

Product
Specifications

Additional Information

  • SKU:
    VPCAP33
  • Brand:
    No
  • Weight(g)
    35.00
  • Length
    90.00
  • Width:
    24.00
  • Height:
    62.00
Community
Discussions
Rate&
Review

Write Your Own Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
The picture shows this not covered but the actual part is covered In shrink wrap. It's quite large but at this price, Wow ! ! !
Quality
Value
Overall
Quality
Value
Overall
Habe das Teil mit einem Spektrum-kompatiblen Orange Empfaenger fuer den Heli eines Kameraden ausprobiert. Gut um zu schwache BECs in Reglern aufzuspueren, mit diesem Voltage Protector gibt es bei kurzzeitigen BEC-Einbruechen keine Brownouts mehr. Auch Spannungsspitzen von Servorueckstroemen werden geglaettet, ob die "Ripples" von starken Digitalservos aber ganz weggefiltert werden, kann ich mangels Oszilloskop nicht messen.



Insgesamt ein nuetzliches Bauteil, um fuer wenig Geld den teilweise schwachen BECs von RTF-Stellern in Helis etwas Unterstuetzung zu geben und Brownouts zu verhindern.



Achtung beim abstecken des Akkus: der Voltage Protector kann bei nicht laufenden Servos das System noch ca. 5 - 10 Sekunden mit Strom versorgen, wobei die Spannung langsam abfaellt. In der Plus Leitung ist ein Widerstand eingeloetet, der Stromspitzen beim anstecken des Akkus verhindert, aber auch fuer eine langsamere Entladung der Kondensatoren sorgt.
Quality
Value
Overall
Quality
Value
Overall
does what it should, nice Product
Quality
Value
Overall
Quality
Value
Overall
Just hooked it up to my 4x4 SCT and wow it works flawlessly! Evan after I unplug the battery it stores enough power to run the servo for a 5 seconds! WOW! Will be ordering one of these for all my rc's!
Quality
Value
Overall
Quality
Value
Overall
Works as intended decent price versus making it your self unless you want a larger capacity of course



Bigger and gives you that extra help when you need it the most ie about to crash
Quality
Value
Overall
Quality
Value
Overall
I TESTED THIS VP BY CONNECTING IT TO A FRSKY V8R7-II RECEIVER DRIVING ONE SERVO ONLY. IT WAS ABLE TO MOVE THE SERVO UNTIL 3 SECONDS AFTER DISCONNECTING THE BATTERY AND RECEIVER CONTINUED BINDED (SOLID GREEN LED) FOR 10 SECONDS. CONNECTING THE BATTERY BEFORE THOSE GREEN LED TURNS RED (BINDING LOST) ALLOWED CONTINUED USE OF THE RECEIVER.
Quality
Value
Overall
Quality
Value
Overall
I am thrilled with this product, It is well thought out and constructed. It provided more than enough surge protection to prevent brown-outs for me, but most importantly, it "Really Works"!! I have installed these now by "Y" leading on all my models and have noticed an improvement in every model. I will never build another model without installing one per Power circuit/Receiver.
Quality
Value
Overall
Quality
Value
Overall
I had more success with a 3300uf capacitor, for handling peak loads. These caps seem to have a very high internal resistance. Even with the resistor removed, the 3300uf capacitor was better for stopping brownouts.
Quality
Value
Overall
Quality
Value
Overall
Added this on my 600EFL just in case :) It seems very well made.
Quality
Value
Overall
Quality
Value
Overall
No se que mas decir de esto, es un gprotector de voltaje es de turnigy, pues eso, que hay que compararlo hasta que se acabe
Quality
Value
Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.