TURNIGY XK motors are without question one of the best motors on the market today. It all starts in our very own factory where we install precision bearings, correctly rated magnets, balanced rotors, tool-steel shafts and stators that are wound by hand. We rigorously test each and every component at 14 critical points during construction, testing everything from materials all the way through to final performance tests.
Because we design and build these motors completely in-house we control the production and ensure product consistency from design right through to shipping. We removed the middle-man to bring you factory prices while not sacrificing quality or performance.
• Hand-wound for maximum copper fill.
• Precision-balanced rotor will boost the efficiency and power performance of the motor.
• Nickel-plated sintered neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions.
Motor size: 3665
Number of pole: 4
Motor KV: 3190
Max Current: 95.2A
Max Voltage: 16.8V / 4S Lipoly
Case Length: 65.5mm
Case Dia: 36mm
Shaft Dia: 5.0mm
Total Length: 85.2mm
Max Currents (A)
Length B (mm):
Can Length D(mm)
Unit Weight (g):
Total Length E(mm)
setting this motor with 90a hk esc,powered by 4s 4000mah 75c max power battery,45 prop for 650mm hull boat. lets see if those 6s powered can catch you. just dont get bump from wave ahead. try it you will never disappointed.full crown from mesetting this motor with 90a hk esc,powered by 4s 4000mah 75c max power battery,45 prop for 650mm hull boat. lets see if those 6s powered can catch you. just dont get bump from wave ahead. try it you will never disappointed.full crown from mewires too small 14awg for 95.2A it's impossible
shaft length too long 21mm
shaft diameter too small 4.96mm
back of motor in plasticvery good!! good job!! ?installed on the twin-engine catamaran, goodI'm running it on 4s with the "Turnigy XK Brushless Motor Water Cooling Jacket 3665/3674 36-50mm (Purple)" in a ProBoat Shockwave.
Great power and awsom speedOmg what a great motor. Running the new turnigy 180a with this motor, and a TFL cutback 442 prop.. Esc at 90F and motor at 70F. 4s powered ... The boat is an outerlimits from hobbyking. Going to get a rigger with this setup. May be looking at 76-80mph with the rigger