Zippkits JAE Mini Sprint Fast Electric Outrigger Kit
Zippkits JAE Mini Sprint Fast Electric Outrigger Kit
Awesome!
Copy and Share the Below URL
Accessories
Special Price $20.55
You save $5.14
Was $25.69
The JAE series was designed and developed as a result of a joint venture between IMPBA Hall of Fame members Rod Geraghty, David Hall, Ron Zaker and Martin Truex Jnr. The main difference between this hull and the others on the market is the use of sharp edges on the bottom of the sponsons and tub, as opposed to curved surfaces. This helps break the surface tension of the water and makes for a faster boat.
The Mini Sprint is a quick build kit and features a level of pre-fabrication never seen before in a boat kit. All of the hard work has been done for you, it requires only simple assembly and finishing.
A full running hardware kit is included with the kit, machined rudder unit and motor mount, flexi shaft, turn fin, nuts and bolts, propeller and much much more. Also included is a comprehensive step by step assembly manual with lots of photographic images.
You will need the following basic tools and supplies to construct the Mini Sprint:
• Modelling knife
• Spring clamps, G clamps
• 1/16" and 3/32" drill bits
• Flat file
• Round file (3/16")
• Sanding block with 80 and 150 grit paper
• Masking tape
• Primer and paint
• Wood filler
• Epoxy finishing resin
• 30min epoxy
• Medium CA with accelerator
Specs:
Length: 500mm
Width: 350mm
Height: 50mm (excluding rudder and fin)
Addional parts required to complete the Mini Sprint:
450 size brushless motor
50amp electronic speed controller for brushless motors
2 channel transmitter and receiver
Mini MG rudder servo
2S 2200mah lipoly battery
| Mini Sprint Manual | Download [3119] |
| No File Name | Download [254] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!
Related Products
-
Turnigy 2200mAh 2S 30C Lipo PackSKU: T2200.2S.30
Special Price $7.59
You save $1.90
Was $9.49
-
HobbyKing 8 Point Snap Knife (5pcs/set)SKU: XD-09B
$2.99
-
$6.84
-
Insta-Cure Plus Gap Filling CA Glue 1/2 ozSKU: HK-106
$6.99
-
Insta-Set CA Accelerator 8. ozSKU: HK-152
$10.97
-
Slow-Cure 30 Min Epoxy Glue 9. ozSKU: HK-206
$18.99
-
Hobbyking GT2E AFHDS 2A 2.4ghz 2 Channel Radio System w/ ReceiverSKU: 9114000017-0
$25.95
-
2848SL 3900kv Brushless Inrunner (WaterCooled)SKU: 9020650104
$42.78
-
ZIPPY Compact 2200mAh 2S 35C Lipo PackSKU: ZC.2200.2S.35
$10.66
-
$9.58
-
Insta-Set CA Accelerator 2. ozSKU: HK-151
$5.42
-
Slow-Cure 30 Min Epoxy Glue 4.5 ozSKU: HK-205
$12.65
-
Turnigy XK2845-3650KV Brushless InrunnerSKU: 9393000031-0
Starting from: $19.64
Special Price $20.55
You save $5.14
Was $25.69
