32mm Alloy folding Prop Spinner with 2.3mm/3mm/3.17mm Adapter

32mm diameter alloy spinner for folding prop, comes with adapters for 2.3mm, 3mm & 3.17mm motor shafts.

Prop Mount Bolts: 2.2mm
Weight: 17g

SKU 32FPSPIN
Brand -
Capacity (mAh) -
Shipping Weight 28.0000
Packaging Length 80.00
Packaging Width 30.00
Packaging Height 60.00

Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Certified Buyer Rated

ejunsun

Satisfactory.

Nowhere in the world can not get this price.

Quality:
Value:
Overall:

Satisfactory.

Nowhere in the world can not get this price.

Certified Buyer Rated

scruffy1

no matching propeller blades available ! :( was hoping to mix 'n' match with a previous purchase that lacked the prop shirt adapter size i needed, but no such luck - nice quality anyway, my mistake

Quality:
Value:
Overall:

no matching propeller blades available ! :( was hoping to mix 'n' match with a previous purchase that lacked the prop shirt adapter size i needed, but no such luck - nice quality anyway, my mistake

Certified Buyer Rated

jozef

Kuel pre mj vetro specter z HK.Pekne spracovan

Quality:
Value:
Overall:

Kuel pre mj vetro specter z HK.Pekne spracovan

Customer Rated

T.rex.450

I use this spinner on a Passer-X electric glider. It spins true and was just a little off balance. The blade mounting bolts on my spinner is 2.3mm in diameter and the gap for holding the blades are 6.3mm so it will be ok for propeller blades with 6mm base. The flange on the spinner back plate that compresses the collar has an 11mm outer diameter. If you are mounting the spinner very close to the motor you have to make sure that there is at least 11mm between the motor mounting screws. I drilled and tapped the blade holders to accommodate 3mm screws because my blades have 3mm holes at the base. All in all an ok product.

Quality:
Value:
Overall:

I use this spinner on a Passer-X electric glider. It spins true and was just a little off balance. The blade mounting bolts on my spinner is 2.3mm in diameter and the gap for holding the blades are 6.3mm so it will be ok for propeller blades with 6mm base. The flange on the spinner back plate that compresses the collar has an 11mm outer diameter. If you are mounting the spinner very close to the motor you have to make sure that there is at least 11mm between the motor mounting screws. I drilled and tapped the blade holders to accommodate 3mm screws because my blades have 3mm holes at the base. All in all an ok product.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!