New Items News Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Assault 700 DFC Electric Flybarless 3D Helicopter Kit

Assault 700 DFC Electric Flybarless 3D Helicopter Kit

Discontinued Product

Please continue searching for a similar product.
SKU:
9155000187
WANT FREE SHIPPING? Click here to find out more!

This is the one you have been waiting for...DFC rotor head, shaft-driven tail system, carbon fiber main frame and dripping in alloy parts, the Assault 700 DFC helicopter is here!

When it comes to helis, size DOES matter. The bigger they are, the better they fly! Following the current trends, the Assault 700 is using a DFC (Direct Flight Control) rotor head which provides crisp, precise flight control with a very low parts count and easy setup. The DFC rotor head design brings the rotor disc closer to the main frame, moving the center of gravity closer to the middle of the heli. This provides better flight characteristics and more agility allowing for the ultimate in extreme 3D flight performance!

The Assault 700 is decked out with aluminum parts which other manufacturers normally sell as upgrades. The entire main frame is constructed from lightweight yet extremely rigid carbon fiber. The main shaft is supported by triple bearing blocks which are also constructed from aluminum. The tail assembly is all alloy and utilizes high quality NMB bearings designed for high speed use. The dually supported tail-pitch slider provides slop-free, precision tail control.

The electronics mounting design is well thought out on the Assault, allowing very easy access to the motor, ESC, servos, FBL system and radio equipment. The front cyclic servos mount directly to the bearing blocks keeping the design rigid, simple and tidy. The direct to swash CCPM servo linkages eliminate troublesome bellcrank systems found on other helicopter kits and offers precise, direct control to the swash.

The battery mounting system features a carbon fiber battery tray which is secured using alloy rails inside the frame. It allows for very easy battery swaps by sliding out of the frame with the batteries attached.

The Assault 700 DFC is mostly pre-built requiring only a few hours for final assembly, electronics installation and setup. We carry a full range of high quality components for this kit which can be found in the related items section below.

Features:
• High precision DFC rotor head
• Carbon fiber main frame
• Shaft-driven tail system
• Thrust bearings in tail blade grips*
• Direct-to-swash CCPM servo linkage design
• Dually supported tail-pitch slider
• All aluminum head and tail assemblies
• Carbon fiber sliding battery tray system
• Fiberglass canopy

*Note: All current stock of Assault 700 DFC helicopters now include thrust bearings in the tail blade grips. A free set of thrust bearings will be sent to all customers who purchased an Assault 700 from the first release batch.

Specs:
Type: Collective Pitch Electric 3D Heli
Main Rotor Diameter: 1560mm
Tail Rotor Diameter: 280mm
Length: 1345mm
Pinion Gear: 13T

Included Items:
Assault 700 DFC Flybarless Helicopter Kit (no electronics)
Tail blades
13T pinion gear
Alloy servo arms
Battery straps
All necessary hardware

Required Items:

Standard size metal gear servo (cyclic control) x 3
Standard size high-speed servo (tail control)
700 size 480~560KV brushless outrunner heli motor
120A HV (12S) brushless ESC
Flybarless system
690~710mm main blades
Voltage regulator/UBEC
1800~2200mAh receiver battery
12S (6S x 2) 4500~5000mAh lipoly battery
6ch or more radio system (transmitter and receiver)

*Note: The user manual is available for download located under the "Files" tab below.

  • SKU 9155000187
  • Brand Assault
  • Capacity (mAh) -
  • Shipping Weight 3860.0000
  • Packaging Length 840.00
  • Packaging Width 145.00
  • Packaging Height 260.00
  • Assault 700 DFC Electric Flybarless 3D Helicopter Kit
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have this kit and have found it excellent value for money. The kit comes well packaged and didn't have broken or missing parts. A lot of the more complex parts are pre-assembled and do not need any reworking. I'm no aggressive 3d pilot, but this bird is flying in its stock form and fly's great and is very stable. My heli uses parts sourced exclusively from HK and if your realistic about your parts selection you will have reliable well performing heli. Cant wait for the next assault!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this kit and have found it excellent value for money. The kit comes well packaged and didn't have broken or missing parts. A lot of the more complex parts are pre-assembled and do not need any reworking. I'm no aggressive 3d pilot, but this bird is flying in its stock form and fly's great and is very stable. My heli uses parts sourced exclusively from HK and if your realistic about your parts selection you will have reliable well performing heli. Cant wait for the next assault!

Bis jetzt erste Sahne. Hab ihn in UK bestellt, kam prompt. Klar, die Schrauben sind na ja... aber heute der erste Flug hat mich berzeugt. Finde ihn sogar besser als meinen "alten" 700er Rex. Allerdings kein hartes 3D.
Mal sehen, wie es weitergeht

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bis jetzt erste Sahne. Hab ihn in UK bestellt, kam prompt. Klar, die Schrauben sind na ja... aber heute der erste Flug hat mich berzeugt. Finde ihn sogar besser als meinen "alten" 700er Rex. Allerdings kein hartes 3D.
Mal sehen, wie es weitergeht


gettigolf 7 points - 26/03/2014

Hallo habe den heli in England bestellt angekommen und gebaut und gepr*ft Ich mu* bis jetz sagen alle schrauben sind geklebt und auch die schrauben sind von guter qualit*t. Das Alu ist ist auch gut und die qualit*t ist f*r den preis einfach spitze. Das gewicht ist gut und ich werde ihn auf 800 kv in 6S betreiben gru*

verified_user Quality:
trending_up Value:
playlist_add_check Overall:


gettigolf 7 points - 26/03/2014

Hallo habe den heli in England bestellt angekommen und gebaut und gepr*ft Ich mu* bis jetz sagen alle schrauben sind geklebt und auch die schrauben sind von guter qualit*t. Das Alu ist ist auch gut und die qualit*t ist f*r den preis einfach spitze. Das gewicht ist gut und ich werde ihn auf 800 kv in 6S betreiben gru*

N'ayant pas obtenu de rponse ,je l'ai command malgr tout ce que j'ai pu lire sur internet..Ben je ne suis pas du tout dcu, trs bonne finition. Il n'a pas encore vol.J'attends l'lectronique. Pour ce prix je recommande.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

N'ayant pas obtenu de rponse ,je l'ai command malgr tout ce que j'ai pu lire sur internet..Ben je ne suis pas du tout dcu, trs bonne finition. Il n'a pas encore vol.J'attends l'lectronique. Pour ce prix je recommande.

For the price, it's a good kit. Some finish up work needed. Read reviews around to see what others think and found.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For the price, it's a good kit. Some finish up work needed. Read reviews around to see what others think and found.

Recieved my Kit in good time considering it came to the US from the international wharehouse. Would have been nice to get an e-mail letting me know it was now available from the US wharehouse as I asked when it would be comming to the US wharehouse...just saying. Kit went together well, a little flashing in holes needed clearing. Plenty of extra hardware. Some damage to canopy. Over all looks great and looking forward to getting the rest of the parts to finish. Only major problem, whould have been good to know that the blades need to have a 5mm hole as the bladess I ordered have a 4mm hole (2 sets) :( don't know what I'm going to do with 2 sets of blades I can't use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Recieved my Kit in good time considering it came to the US from the international wharehouse. Would have been nice to get an e-mail letting me know it was now available from the US wharehouse as I asked when it would be comming to the US wharehouse...just saying. Kit went together well, a little flashing in holes needed clearing. Plenty of extra hardware. Some damage to canopy. Over all looks great and looking forward to getting the rest of the parts to finish. Only major problem, whould have been good to know that the blades need to have a 5mm hole as the bladess I ordered have a 4mm hole (2 sets) :( don't know what I'm going to do with 2 sets of blades I can't use.

I want to update my review. First I stretched it with $30 stretch kit and I use 810mm RJX blades. For piece of mind I put Align swash but I was flying with original swash and it did not break in 20 flights. Gartt just sent me next kit with strengthened swash. So I think there was an issue but it was not critical QC issue.

I am sure Assault in stock form is flyable. I like DFC head. New black $46 700 motor 530kV is awesome. If you want low RPM use YEP 120A HV with ACTIVE Freewheel. Other regulators will get hot at low throttle curve. Experienced pilot can make it fly extremely well. New black KBar for 32-36$ at eBay does not have governor but is best bung for buck gyro today. I am extremely happy with stretched Assault. You can not find better budget 700-800 heli. For strong power setup Align mod 1.0 slant main gear and slant autorotation gear are nice because generate less noise. Front umbrella gears I have replaced with Align for 800 but for 700 Assault umbrella gears should be fine. This heli is awesome.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I want to update my review. First I stretched it with $30 stretch kit and I use 810mm RJX blades. For piece of mind I put Align swash but I was flying with original swash and it did not break in 20 flights. Gartt just sent me next kit with strengthened swash. So I think there was an issue but it was not critical QC issue.

I am sure Assault in stock form is flyable. I like DFC head. New black $46 700 motor 530kV is awesome. If you want low RPM use YEP 120A HV with ACTIVE Freewheel. Other regulators will get hot at low throttle curve. Experienced pilot can make it fly extremely well. New black KBar for 32-36$ at eBay does not have governor but is best bung for buck gyro today. I am extremely happy with stretched Assault. You can not find better budget 700-800 heli. For strong power setup Align mod 1.0 slant main gear and slant autorotation gear are nice because generate less noise. Front umbrella gears I have replaced with Align for 800 but for 700 Assault umbrella gears should be fine. This heli is awesome.

Good kit rite up there with big money kits. Got first run kit some problems soft metal in in tail housing striped holes fixed it with tap and die . Great kit overall !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good kit rite up there with big money kits. Got first run kit some problems soft metal in in tail housing striped holes fixed it with tap and die . Great kit overall !

Good kit have yet to fly still putting together waiting for cyclic servos hope it flys as good as everyone says!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good kit have yet to fly still putting together waiting for cyclic servos hope it flys as good as everyone says!

integ. 2A BEC fr direkte Stromversorung des Recivers. Die Servos werden dirkt ber einen 2S Lipo
versorgt. Alle Bentigten Verbindungen beinhaltet das DPC. Kein lten etc. notwendig.

1 x HK YEP 120A HV (4~14S) Brushless Speed Controller (OPTO)

1 x HK OrangeRx R620 Spektrum/JR DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe
1 x HK OrangeRx R110XL 2.4Ghz DSMX Satellite Receiver (long antenna version)

1 x HK Turnigy HeliDrive SK3 Competition Series - 4962-530kv (700/.90 size heli) mit 12er Motorritzel
1 x HK 715mm TIG Carbon Fiber Z-Weave Main Blades

Als Fbl-System ist ein TGZ-380 zum Einsatz. In dieser Kombi ist der Assault 700 ein Heli wo das Preis/Leistungsverhltnis noch stimmt. Die ersten Flge waren erfolgreich und mit 1800-1900 Upm hat er richtig Dampf. Die Zukunft zeigt wie er sich schlgt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

integ. 2A BEC fr direkte Stromversorung des Recivers. Die Servos werden dirkt ber einen 2S Lipo
versorgt. Alle Bentigten Verbindungen beinhaltet das DPC. Kein lten etc. notwendig.

1 x HK YEP 120A HV (4~14S) Brushless Speed Controller (OPTO)

1 x HK OrangeRx R620 Spektrum/JR DSM2 Compatible Full Range 6Ch 2.4Ghz Receiver w/Failsafe
1 x HK OrangeRx R110XL 2.4Ghz DSMX Satellite Receiver (long antenna version)

1 x HK Turnigy HeliDrive SK3 Competition Series - 4962-530kv (700/.90 size heli) mit 12er Motorritzel
1 x HK 715mm TIG Carbon Fiber Z-Weave Main Blades

Als Fbl-System ist ein TGZ-380 zum Einsatz. In dieser Kombi ist der Assault 700 ein Heli wo das Preis/Leistungsverhltnis noch stimmt. Die ersten Flge waren erfolgreich und mit 1800-1900 Upm hat er richtig Dampf. Die Zukunft zeigt wie er sich schlgt.

  1. 1
  2. 2
Customer files
Assault 700 User Manual Download [2015]
Failed Tal Assembly Download [150]
Failed Tal Assembly Download [150]
Assualt 700 User Manual (updated 21/11/1 Download [6565]
No File Name Download [361]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking