New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Carbon Fiber Square Tube 10 x 10 x 300mm

Carbon Fiber Square Tube 10 x 10 x 300mm

Shipped From:
  • USA
  • Global
QTY:

Now save save $0.00 $0.00

$3.35
Status:
In Stock
SKU:
078000008-0
WANT FREE SHIPPING? Click here to find out more!

Carbon Fiber Square Tube 10 x 10 x 300mm

Specs:
Outer Dimensions: 10 x 10mm
Inner Diameter: 8mm
Length: 300mm
Weight: 19g

  • SKU 078000008-0
  • Brand HobbyKing
  • Capacity (mAh) -
  • Shipping Weight 23.0000
  • Length 300.00
  • Width 10.00
  • Height 10.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bonne qualit? : rien ? redire.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bonne qualit? : rien ? redire.

These tubes rock! I will attest that they have very good quality! In response to drilling a hole in the previous review I would also recommend a high speed drill like a dremel to drill holes or for cutting. Really good quality stuff and for the price you cant beat them. I am using them for wing reinforcment to a fuselage aircraft. I would recommend a friend to buying any carbon fiber from HK so far it has been very good quality

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These tubes rock! I will attest that they have very good quality! In response to drilling a hole in the previous review I would also recommend a high speed drill like a dremel to drill holes or for cutting. Really good quality stuff and for the price you cant beat them. I am using them for wing reinforcment to a fuselage aircraft. I would recommend a friend to buying any carbon fiber from HK so far it has been very good quality

Great little lightweight tubes for multirotor arms. Id suggest gluing wood dowel segments inside locations that you drill through (before drilling), otherwise they will crack around your holes in crashes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little lightweight tubes for multirotor arms. Id suggest gluing wood dowel segments inside locations that you drill through (before drilling), otherwise they will crack around your holes in crashes.

That square 10x10 mm tube seem very strong and nice made. I want to replace my 10x10 aluminium square tube i used for tri copter arms, that carbon seem very light. I don't want to try drilling to make holes but i bought an extra tube to test if i can drill it or just use epoxy as well. Anyway very cheep price for the value!
A funny thing about the package.. the box was really big.. and i bought #3 10x10 x 300 mm squarred carbon tube and #3 motor mounts. i think nobody would imagine what is inside :-) lol .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

That square 10x10 mm tube seem very strong and nice made. I want to replace my 10x10 aluminium square tube i used for tri copter arms, that carbon seem very light. I don't want to try drilling to make holes but i bought an extra tube to test if i can drill it or just use epoxy as well. Anyway very cheep price for the value!
A funny thing about the package.. the box was really big.. and i bought #3 10x10 x 300 mm squarred carbon tube and #3 motor mounts. i think nobody would imagine what is inside :-) lol .

DO NOT drill through as I did with my tricopter. The hole made the whole arm's end fall into separate hair thin fibers from with first hard landing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

DO NOT drill through as I did with my tricopter. The hole made the whole arm's end fall into separate hair thin fibers from with first hard landing.

I needed a way to make a "channel" ion a wing of a sloper I'm reviving. This one did the trick! I can put a JR connector through it without any trouble. I have to shave the corners of the connector but it slides right thru now. And it is light weight and strong!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I needed a way to make a "channel" ion a wing of a sloper I'm reviving. This one did the trick! I can put a JR connector through it without any trouble. I have to shave the corners of the connector but it slides right thru now. And it is light weight and strong!

Its a tube and its square and has a round hole :) it is real carbon rovings

Hint: put a 8mm wooden dovel inside where you plan to drive screw's thru it, will prevent it from cracking under the screw pressure ! Also seal the cut ends with thin cyano glue!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its a tube and its square and has a round hole :) it is real carbon rovings

Hint: put a 8mm wooden dovel inside where you plan to drive screw's thru it, will prevent it from cracking under the screw pressure ! Also seal the cut ends with thin cyano glue!!

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!