Become a Supplier Blog New Items

Total Price


Cart 0 Cart 0 Loading...

H-King (PNF) MX2 Extreme 30E 4S EPO 3D Airplane 1270mm

Generating Links

H-King (PNF) MX2 Extreme 30E 4S EPO 3D Airplane 1270mm


Now save save $0.00 $0.00

Out of stock!
want FREE shipping? Click here to find out more!

The H-King MX2 Extreme 30E is perfect to take a pilot from general sport flying to confidently flying 3D aerobatics. It is lightweight, has a powerful brushless motor set-up, and features large control surfaces that make it great for lively tumbling and extreme, spirited types of flying. Things such as hovering, waterfalls, harriers, knife-edge, rolling circles, and other extreme 3D aerobatics are made much easier when flying the MX2 Extreme.

Weight distribution of the MX2 Extreme is optimized to allow for perfect balance and control, this gives it good penetration in flight, and the ability to carry momentum through all the high-energy maneuvers. Another feature that sets it aside from other foamies is the light, but stiff EPO wing. This was achieved by using a hollowed-out EPO frame, hardwood main spar, and foam sheet covering. The result is a stiff, crash-resistant structure that is strong, lightweight, and doesn't twist during high-g maneuvers. The H-King MX2 was helped in its grueling test flying schedule by one of our top 3D test pilots, Michael Wargo. He helped fine-tune the MX2 into an airplane that any accomplished 3D pilot will love, and to please even the most discriminating pilot.

This Plug-N-Fly 3D airplane is very quick and simple to assemble and is supplied in a striking red, white, and blue pre-painted finish. Also supplied are carbon fiber landing gear, wheels, wheel spats, and a full accessory pack. Power is supplied by a pre-installed 3702-900KV brushless motor with 60A ESC, these are driving a fine pitch 13x4 composite propeller, this is the perfect set-up for excellent throttle response when performing 3D aerobatics. Also supplied and pre-installed are 4 x 13g high-speed, metal-geared digital servos, these high-quality servos have an excellent resolution and speed for precise control.

The MX2 Extreme is easy to transport due to its removable wings and is fantastic fun to fly just about anywhere. If you are looking for an airplane to progress into 3D aerobatic flying and to take your flying skills to the next level, then the H-King MX2 Extreme is a perfect choice.

• "Plug N Fly", supplied with pre-installed motor, ESC, and digital MG servos
• Stiff, light-weight EPO airframe
• Powerful motor set-up, fine-tuned for 3D aerobatics
• Light-weight, and crash-resistant, hi-viz color scheme
• Perfect for beginners to 3D flying
• Outstanding aerobatic performance and 3D maneuverability.
• Simple design allows for easy equipment access and installation

Model: H-King (PNF) MX2 Extreme 30E EPO 3D Airplane
Wingspan: 1270mm
Length: 1210mm
Materials: EPO, hardwood main spar
Flying Weight: 1240g (excluding battery)
Motor: 3720-900KV brushless
ESC: 60A brushless with 4A switching BEC
Propeller: 13x4 composite
Servos: 4 x 13g metal geared digital
Radio: 4ch or more
Battery: 2200mAh 4S (14.8V) 45~90C LiPo w/XT60 (not supplied)
Flight Time: Approx 5mins with 2200mAh battery

1 x H-King MX2 Extreme 3D ready-built airframe
1 x Carbon fiber main landing gear
1 x Pair of main wheels
1 x Pair of wheel spats
1 x Tailwheel assembly
1 x 3720-900KV brushless motor
1 x 60A ESC w/BEC
4 x 13g metal-geared digital servos
1 x 13x4 composite propeller
1 x Accessory pack

4ch or more transmitter and receiver
2200mAh 4S (14.8V) 45~90C LiPo battery with XT60 connector
Suitable LiPo battery charger

Please note: A copy of the building manual is available under the "Manuals/Files" tab above.

  • IC/2:Elec Electric
  • Motorsize(diam-or-cc) 37.00
  • Wingspan(mm) 1270.00
  • Length(mm) 1210.00
  • Michael Wargo Flies the H-King MX2 30E Extreme 4S 3D Airplane
Upload video

Only registered users can upload video. Please, log in or register

Sort by
Most Recent Topics
* Nickname:

* Your Reply:

Please, enter the text shown in the image into the field below
*Verification Code:
Post a new Topic
* Nickname:

* Your Topic:

Please, enter the text shown in the image into the field below
*Verification Code:
Post Topic

Only registered users can write reviews. Please, sign in or sign up

John | Verified Buyer

  • Overall
  • Quality
  • Value

Fun Flyer

Jan 25, 2023

I loved the Voltigeur but sadly I beat it to death, but I learned a few things I would recommend as I have now bought the MX2. First, on the MX2 I removed the motor and strengthened the firewall with a little CA and kicker. Then reinstalled the motor with Loctite (I found the Xbrace to motor screws were not loctited). Then I installed a GatorRC spinner GSP8657BLU with a Falcon elec. wood prop WPE1304. Lastly I had to use a 4cell for CG so I added a throttle limit of 90%. Now I can get full throttle for a long time and it's very smooth. Have fun!

Ali | Verified Buyer

  • Overall
  • Quality
  • Value

Top Modell

Dec 16, 2022

Top Flieger macht alles mit.

Raymond | Verified Buyer

  • Overall
  • Quality
  • Value

Nice plane but partts expensive

Oct 23, 2022

At the $180 price point (sale price) I can recommend this plane in spite of a few minor quality control problems mentioned in some other reviews. Performs 3d quite nicely. However, $137 for a fuselage replacement makes this a no go. Didn't notice that when I purchased the plane.

Amedeo | Verified Buyer

  • Overall
  • Quality
  • Value

vola bene ma solo per esperti

Oct 15, 2022

bello, leggero e robusto ma adatto a piloti molto esperti

RC since 1974 | Verified Buyer

  • Overall
  • Quality
  • Value

A good 3s Plane

Aug 25, 2022

Very good overall plane. 4 Stars because of the 4s power system. Why make a relatively light airplane heavier with 4 cells? I put a similar sized 1400 kv motor in and fly it on 3s with a 12x4 prop. Flies beautifully on this set up. Most pilots have many 2200 3s batteries. Sales might be higher with this 3s set up. Just my thoughts. Thanks.

Samsheli | Verified Buyer

  • Overall
  • Quality
  • Value

good but not great

Jul 26, 2022

The plane flies very good. When going hi throttle you get a lot of vibration. Partly because of cheap spinner. I balanced prop and backplate, didn't help. Right out of the box the canopy had come off during shipping. It was dented and creased. Came un-glued from paint. Overall plane looks and flies good. Paint easily comes off and stickers bubble up. Still a good Beater plane!

tol | Verified Buyer

  • Overall
  • Quality
  • Value


Jul 24, 2022

Good plane

Dave | Verified Buyer

  • Overall
  • Quality
  • Value

Repurposed Voltigeur

Jul 12, 2022

Been in the hobby since 1974. Advertised wingspan is incorrect. I measured at the widest point and got 47.75 inches or 1212.85 mm. Advertised at 1270mm. I converted to same size 1400kv motor and it balances at 102mm as stated on box directions with a 2200 3 cell. This seems to be a repainted and repurposed Voltigeur. Honestly I believe the Voltigeur at $15 less is a better value and more people have 3s 2200 battery packs. Just my opinion. I am sure this plane will do well on my 3s set up.

Philthy | Verified Buyer

  • Overall
  • Quality
  • Value

The one to buy

Jun 24, 2022

This plane does it all

Xenophon | Verified Buyer

  • Overall
  • Quality
  • Value

Pretty Decent 3D plane

Jun 09, 2022

This is a really decent 3d plane , a friend who's a 3d monster did everything with it, ripping knife edge spins, rifle rolls, rolling 8s,circles,loops..
I hovered it ,flat spins easily, almost floaty...well worth it .
Make sure the cg is on the money for best 3d ability,and all control surfaces go lock to lock with the recommended expo, the ailerons are crazy powerful,as mentioned previously the aileron horns hit their fairings ,I'll carve slots in them so they clear ....I fixed the ESC to the floor with a 3/4 inch square of Velcro..the prop hole is centered amazingly well, but I went with a wood prop, I'm going to experiment with sfgs ....rudder is a little weak because of throw limitations but I'll drill a hole in the control horn to increase it..
I'm using an rt 2700 35c and getting 5:30 with constant 3d out of it, with pretty decent power , with a weight that rivals the recommended smaller 2200 batts .

  1. 1
  2. 2
  3. 3
Customer files
H-King MX2 1270mm PNF Manual Download [2]
20230204_163909.jpg Download [4]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!