KongCopter FQ700 Pro Quad-Copter (PNF)
KongCopter FQ700 Pro Quad-Copter (PNF)
Awesome!
Copy and Share the Below URL
The KongCopter series of multi-rotors are a favourite choice of aerial photography specialists, amongst whom their reputation for great performance and reliability is well known.
The KongCopter FQ700 Pro is no exception to this and, as a top of the range, professional level heavy-lift camera platform designed and built to exacting standards for performance without compromise.
Strong, fold-down arms on the FQ700 Pro allow it to be stored and transported in the minimum of space for a multi-rotor of this size, while on site assembly is as simple as locking the arms into position using the single-action locks!
Woven carbon fiber sheet and tubes give the model incredible strength without a great weight penalty and careful use of aluminum alloy parts provide secure mounting for the motors, arms and undercarriage.
The FQ700 Pro features a heavy-duty equipment mounting frame also made from aluminum alloy and carbon fiber tube.
Four, super-smooth 4114 380kv out-runner motors are wired directly to the 40A ESCs incorporated under each motor mount and drive 15 x 5 inch carbon-composite folding propellers. Power to the motors is supplied from the central X-Cam Concentrator power distribution unit that also provides power to the retract and LED lighting units, and has an external supply for your camera and gimbal assembly.
A payload capacity of 3kg gives the FQ700 Pro a maximum AUW of 5.6kg fully laden, so it is more than capable of carrying a full DSLR camera setup (such as the Panasonic GH3/GH4 or Sony A7) for truly professional results and the recommended 6S 10000mAh LiPoly batteries will allow up to 15 minutes of flight time to do it in!
Features:
• Strong and lightweight folding structure
• Single action arm locking mechanism
• Servo-less retractable undercarriage
• Integrated ESCs
• X-cam Concentrator power distribution unit
• Woven carbon fiber structure
• Easy to Assemble, Upgrade and Maintain
• 3kg payload
• 15 minute flight time
Specs:
Wheelbase (diagonal): 710mm
Motors: 4114 380kv
ESC: 40A
Propellers: 15 x 5 carbon composite folding
Weight: 2600g (frame complete)
Max AUW: 5.6kg
Included:
FQ700 Pro Quad-Copter
X-Cam Concentrator
Propellers
Blade holders
Hardware
Manual
Required:
5000~10000mah 6s LiPoly battery
5ch Transmitter and receiver (Min)
Flight Controller
Camera gimbal
Camera
FPV equipment (optional)
Manual | Download [2432] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!