New Items Forum
Register

Total Price

$0.00

Cart 0 Cart 0 Loading...

Rhino 1050mAh 2S 7.4v 40C Lipoly Pack

Rhino 1050mAh 2S 7.4v 40C Lipoly Pack

Discontinued Product

Please continue searching for a similar product.
SKU:
R1050-40-2
WANT FREE SHIPPING? Click here to find out more!

Rhino batteries provide an outstanding power/weight ratio. Equipped with copper tabs and most packs having opposing electrodes; the Rhino batteries are designed for high output & low internal resistance.


Capacity : 1050mAh
Constant discharge: 40C
Burst rate: 50C (15sec)
Configuration : 2S 7.4v
Pack size: 72x39x12mm
Weight : 75g

 

  • SKU R1050-40-2
  • Brand -
  • Shipping Weight 105.0000
  • Length 74.00
  • Width 15.00
  • Height 36.00
  • Capacity (mAh) 1050.00
  • Discharge(c) 40.00
  • Max Charge Rate(C) 5.00
  • Length-A(mm) 72.00
  • Height-B(mm) 39.00
  • Width-C(mm) 12.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

pour alimenter mon allumage electronique moteur essence

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

pour alimenter mon allumage electronique moteur essence

This is an amazing little battery. I'm using it for a Tamiya TLT-1 where size limitations limit my battery choices. This battery has excellent punch and fits perfectly into a small space.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is an amazing little battery. I'm using it for a Tamiya TLT-1 where size limitations limit my battery choices. This battery has excellent punch and fits perfectly into a small space.

I purchased 4 of these for a two Losi Mini SCT 1/16 scale RC cars. They work and fix great. I ordered from the AUS warehouse and had them within the week. Cells were well balanced, run time is great (approx. 13 mins) and no problems. Very happy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased 4 of these for a two Losi Mini SCT 1/16 scale RC cars. They work and fix great. I ordered from the AUS warehouse and had them within the week. Cells were well balanced, run time is great (approx. 13 mins) and no problems. Very happy.

I purchased 4 of these to use as Receiver Batteries, along with 4X HobbyKing HKU5 5V/5A UBEC's to drop the voltage down so the servos would be overloaded.

Converting the wire was simple enough. While I know I voided the warranty, I removed the heavy gage wire and replaced it with a receiver wire that's a bit larger in gage than the standard receiver wire on a speed controller.

If you decide to change the gage on your batteries, you need to cut the wire at the base of the soldering, otherwise, it'll take too much heat to melt the solder, which will transfer to the battery.

After changing the battery lead, they were easy to install, charge, and use in my slope fighters. Great battery for running 2 servos, lasts a really long time and provides lots of power for slope fighting or just soaring. Will be using two of them to power my Chandelle and Gulf Coaster, with the HKU5 5V/5A UBEC's.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased 4 of these to use as Receiver Batteries, along with 4X HobbyKing HKU5 5V/5A UBEC's to drop the voltage down so the servos would be overloaded.

Converting the wire was simple enough. While I know I voided the warranty, I removed the heavy gage wire and replaced it with a receiver wire that's a bit larger in gage than the standard receiver wire on a speed controller.

If you decide to change the gage on your batteries, you need to cut the wire at the base of the soldering, otherwise, it'll take too much heat to melt the solder, which will transfer to the battery.

After changing the battery lead, they were easy to install, charge, and use in my slope fighters. Great battery for running 2 servos, lasts a really long time and provides lots of power for slope fighting or just soaring. Will be using two of them to power my Chandelle and Gulf Coaster, with the HKU5 5V/5A UBEC's.

excellent battery, i used it in a v-one rrr, fit nice and snug. i was surprised how long it has lasted considering it gets in contact with dirt and nitro fuel.
definitely worth getting

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent battery, i used it in a v-one rrr, fit nice and snug. i was surprised how long it has lasted considering it gets in contact with dirt and nitro fuel.
definitely worth getting

Quickly died a bank.

I hope the other will be better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Quickly died a bank.

I hope the other will be better.

bateria de lipo muy econimica y buen rendimiento

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bateria de lipo muy econimica y buen rendimiento

Perfect fits for Hitec Optic 6 and Eclipse. I'm charged for first use 890 mAh. NiMH and NiCd - old school.connections are weird but battery is ok

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect fits for Hitec Optic 6 and Eclipse. I'm charged for first use 890 mAh. NiMH and NiCd - old school.connections are weird but battery is ok

Great LiPo! Great punch! Running it in my HyperFlea allows me to do vertical climbs with no problems! Being able to charge it at 5A is a huge plus for those sunny days where you need to fly like yesterday!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great LiPo! Great punch! Running it in my HyperFlea allows me to do vertical climbs with no problems! Being able to charge it at 5A is a huge plus for those sunny days where you need to fly like yesterday!

40C rating is too high for these. When pushed at 40A for their full capacity (about 1 minute), they puff after just a few cycles.



If these were labeled 20C, it would be about right. They work fine at 20A with peaks to 40A, but 40A for longer periods of time quickly destroys them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

40C rating is too high for these. When pushed at 40A for their full capacity (about 1 minute), they puff after just a few cycles.



If these were labeled 20C, it would be about right. They work fine at 20A with peaks to 40A, but 40A for longer periods of time quickly destroys them.

  1. 1
  2. 2
  3. 3
  4. 4
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!