Turnigy Basic 90 degree All Metal Tricycle Retract System 3mm Wire Leg's, foam wheels + Steering Nosewheel, ideal for lightweightmodels. or 1.4M wingspan Pilatus PC-9
Turnigy metal Series electronic retract systems feature an all metal construction and advanced micro controllers with an integrated circuit to automatically stop the retract and recover from jamming problems. The integrated circuit also protects against over-current draw.
Shaft hole Diameter: Φ4mm
Leg size: 95mm (Mains) 100mm (Nose unit)
Tires: 2.25” (Mains) 2.25” (Nose wheel)
Operating Voltage: 4.8V~6V
Speed: 5V: 4 second /90 degree, 6V: 3.5 second /90 degree
Torque: 5V: 2kg-cm, 6V: 3kg-cm
Current: 5V: no loading:40mA with loading:100mA
6V: no loading:50mA with loading:120mA
Bolt Pattern: 40x40mm
Nose leg extended once and then failed to respond to any command, no noise from motor at all. One main leg extended then failed to retract with just a slight whine from the motor. I wouldn't normally comment, but 2 out of three not working is incredibly poor.I received this now.
But this retract is no working. all retrack no wokking.
I have the other maker retract, It is no problem.
Only this retract No working.
I hope refund.En aot dernier, j'ai achet ce train pour mon Tucan MPX. Le montage est facile car les fixations sont conformes au montage MPX. Pour le train principal, il suffit de tailler un peu l'lapor pour le moteur du boitier. Par contre, les 2 botiers du train principal ont grills avant montage sur l'avion.
Impossible de rentrer le train, mais la sortie fonctionnait toujours. Aprs dmontage de la carte lectronique, j'ai repr la cause: 1 2 transistors sur les 4 de l'tage de sortie taient HS. J'ai chang ces transistors et maintenant le train fonctionne et l'avion a fait 5 vols ce jour.I purchased these for my Multiplex Tucan. They fit well with only slight modification to the foam wings for the two mains. After installation, I tested them, only to learn that the nose wheel gear would open 1/2 way and then stop. Contacted HK Support for a replacement, supplied the YouTube video of the problem, and got the second set shipped to me. My original order was in early June. The second set arrived in late August. Installed the new nose gear, took the a/c to the flying field. All worked well for the first 4 flights. 5th flight, the nose gear would not retract. I've tried everything to get this unit to come back to "life", but no luck. I give up. The fixed gear supplied with the kit is effective, trouble-free, and the a/c does not perform much differently with the gear retracted, versus the fixed gear. These retracts are not worth the cost, wait, trouble.Totally better than Multiplex Tucan sh.. I'm using both of retracts - simply Turnigy is better done.Fits the MPX Tucan with just minor changes - had to cut out a bit of the foam from the wings. Was having ~20 flights so far - no problems. Legs are a little bit loose in their housing but over all very reliable retractables and a perfect match for the Tucan.Son iguales que los que vende multiplex para su Tucan a la mitad de precioThese are a perfect match for the MPX Tucan.
Mounting holes line up perfect with the holes for the standard non retract LG on the MPX Tucan.
3 flights so far and still works perfect.
4mm wire legs.