This FPV A/V cable connects to your Turnigy HD ActionCam via the USB port and allows for live video output for FPV use. One end has the micro USB connector, the other has four bare wire leads for connecting to your FPV transmitter.
All Turnigy HD ActionCam cameras are compatible with this cable and support the live A/V out function, as well as some SJ4000 cameras with firmware N201405270ZV01 or later*.
*Note: We cannot guarantee compatibility with the SJ4000 camera as many retailers are selling older versions which does not support this function. All Turnigy HD ActionCam cameras support the use of this cable.
Very handy to make a cam to tv wire and to hook up to your fpvgreen and black are bypassed, green is ground for video, white video signal, and red and black are for alimentation to camera (with turnigy action cam feed 5V or not).
Useless with a quanum 2D gimbal, cause wire is too big to plug in action cam while in Q-2D. Very disappointed with this product, would need a "flat" version but don'T find one anywhere...I feel hobbyking could make a more flexible connection then this, and perhaps a lower profile attachment. Other than that it's a decent product.Turnigy ActionCam FPV HD Live Video Out A / V Cable very good quality suitable for gopro also ..This cable is so large the camera will not sit in the gimbal unless you turn the camera upside down. Also, the cable is so stiff it makes the gimbal go crazy. The fix is to peel of the outer plastic exposing the four wires. Keep in mind: When using the Turnigy Action Cam you will need to switch to TV mode every time you power up...same w reversing orientation from normal to upside down. Of course that also means removing the camera from the gimbal every time. A lot of work when compared to a goproI have read that the polarity on the power cables is inverted and it can fry your Turnigy ActionCam so I decided not to mess with it, the battery life on the camera is great so I don't need them either, but someone should confirm that.......................................................................a friend burnt his camera while trying to connect them for live feed cause he used 5 wires normal usb wire. this one have only four so I guess its safe to say it'll supply only 5 volts which suits turnigy action cam.very good for the priceOverall a great item at a good price
Only issues with it were the fixing cable (L bracket ) points down and the shroud round the cables is very stiff . I did rectify this by cutting off the shroud and taking the fixing l bracket back to the metal fitting itself using heat shrink to cover the L bracket back over with a bend up instead of down plus 2 small bits of heat shrink on the now open cables to give it a neater lookThis Turnigy actioncam FPV live video out cable is great for anyony looking to connect your actioncam for FPV use. Quality is great for the price. Recommend!