Turnigy L2215J-900 Brushless Motor (200w)

Had 20+ flights with it & runs very well, good power & quiet - Great motor.

I just received my Turnigy L2215J-900 motor....I mounted it on a scratch built 3D foamy. The motor has plenty of power. However, I had to replace the prop adapter that came with it as the adapter shaft was badly machined...it wobbled so badly that the motor nearly shook itself off the mount the first time I test-ran it with the prop....since replacing the prop adapter, the motor is quite smooth and powerful.

Turnigy L2215J-900 quivalent au Turnigy XP 2830-1000 pour seulement 10g de plus et mme puissance. trs belle finition. le moteur est fourni en plus avec des prise PK 3.5mm souder sur le contrleur.

Achet en solde pour seulement $7.50.

I use four of them on my 450 size homemade quad. AUW is 1500 g. Flight time with 3s 3300 and 10x5 props is arround 10 minutes.

this is an awesome motor for 450 frame size quad copters works great with 10*4.4 sf props on 3 cells

I use this motor on a 20oz sports 3d model. I use a 9x3.8 prop and its giving me 137watts and using 13 amps. I am using a 2200mah 3s battery and am getting 15mins out of it.

This is a great little motor. Id buy again for sure

Very powerful motor. I'm using them on a Quadcopter. With a 3s 3000mAh I get 15 min of flight time. It's an high quality motor for a very decent price. Recommended to multirotors fellows

These little motors are pretty great. They are efficient, powerful and quiet. Obviously the price point is good too. I use them on my quad and they really are top notch. My only complaint is that the QC seems to be a bit questionable as two of the five units I originally purchased were out of balance or had some kind of bearing issue that made them noisy and spin poorly. However, the cost of the units must be considered, so it's certainly not enough to hinder future purchases. Overall, very nice!

I'm loving these motors on my SK450 quad. Puts out 1050 grams of thrust each, with a 10x4.5 SF prop, and comes down lukewarm. Good buy!

These are powering my scorpion hex. Nice balanced motors, running smooth.

So far, no issues. Recoommend.