United States
Shipped From:
  • UK
  • EU

Turnigy nano-tech 1400mah 3S 15~25C Lipo AIRSOFT Pack

Turnigy nano-tech 1400mah 3S 15~...

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal b...

Now save save $0.00 $0


Max Qty add to cart is -1 in one time

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


essential items and

When it comes to putting rounds down range, no one wants to compromise on fire power! thats why the legendary Turnigy nano-tech batteries are now available for Airsoft combat. Higher motor RPM, less voltage sag and extended operating times equal better performance from your weapon of choice.

The nano-tech Airsoft series also feature 5C charge ratings putting you back on the front line faster!

Get an unfair advantage and make sure your opponents know that they have been taken out by nano-tech!

Capacity: 1400mAh
Voltage: 3S1P / 3S Cell / 11.1V
Discharge: 15C Constant / 25C Burst
Weight: 110g (including wire, plug & case)
Dimensions: 127x20x21mm
Balance Plug: JST-XH
Discharge Plug: Mini-Tamiya (Mini Molex)
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives.
1) The nanometer conductive additives form ultrastrong electron-conducting networks in the electrodes which can increase electronic conductivity.
2) These additives create a superstrong ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion.
Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
Advantages over traditional Lipo batteries:
-Power density reaches 7.5 kw/kg.
-Less Voltage sag during high rate discharge, giving more power under load.
-Internal impedance can reach as low as 1.2mΩ compared to that of 3mΩ of a standard Lipoly.
-Greater thermal control, pack usually doesnt exceed 60degC
-Thickness swelling during heavy load doesnt exceed 5%, compared to 15% of a normal Lipoly   during heavy load.
-Higher capacity during heavy discharge. More than 90% at 100% C rate.
-Fast charge capable, up to 15C on some batteries.
-Longer Cycle Life, almost double that of standard lipoly technology

*The length of balance charging wire may vary


Additional Information

  • Blade Count:
  • Speed (Sec/60deg):
  • Kv(rpm/v)
  • Torque(kg)(min. 0.01kg)
  • Diameter X(Inch):
  • Max Currents (A):
  • Power (W)
  • A(mm)
  • B(mm):
  • Length B (mm):
  • C(mm)
  • Can Length D(mm)
  • Max Voltage(V):
  • D(mm):
  • Shaft A(mm)
  • E(mm)
  • F(mm):
  • Diameter C(mm):
  • Total Length E(mm)
  • SKU
  • Weight(g):
  • Length:
  • Width
  • Height
  • Capacity (mAh):
  • Discharge(c):
  • Length-A(mm)
  • Height-B(mm)
  • Width-C(mm):
  • Unit Weight (g):
  • Max Charge Rate(C)
  • Watt Hour

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Haven't tested the actual battery (but having previous experiences with Turnigy Li-Po's in airsoft replica's I have full confidence in its workings).

What I did try out though (which was my initial reason to buy these) was to see if they would fit under my LCT AK74MN NV body. I run a Lonex gearbox and hop-up chamber. I'm unable to rack the slide back to reveal the hop-up slide, so in-field adjustments are a no-go, but I was able to cram it under there. Or you're bound to removing the dustcover and adjust the hop-up.

My suggestion is to have the plug connect to the replica's wiring behind the slide, so above the hop-up chamber.

I got 2 of these. My next purchase is going to be 2x 1200 mAh, 3S. Just because it should be slightly less of an hassle to connect. But the bottom line is: these 1400's fit.
this is a great battery, and it fits in the power pod of at Flite Test mini plane perfectly. provides plenty of power
have two of them in my PTW Cranestock. Best one for that!!! With two in the Stock it works somethings two full days!
They fit Systema PTW perfectly in the crane stock.
Work great 2-3 for a whole day of airsofting!
Also cheaper as anywhere else.
First off, this battery is of excellent quality. I have no doubts on its ability to crank your ROF on any AEG.

I'm docking 1 star because the listed dimensions are inaccurate.

Here are the true dimensions:
Length(A): 125.5 mm (cell); 130.5 mm (cell with wires tucked in)
Height(B): 19.8 mm
Width(C): 18.9 mm
Widest cross section: 26.1 mm (there's some extra material near the wires)
Interior diameter of milspec* M4 buffer tube: 24.9 mm

This did not fit my AEG. I will probably use it in another gun, but it failed my intended purpose. Now, I'm not saying it wont fit ALL M4 buffer tubes, there are certainly commercial and non-standard sized ones, but buy with caution. LFMF.
Great Product! Superb power
the best battery for m4 tube with original mechanical parts for every people that want one high rate of fire and it is'nt expensive
Producto de altsima calidad. La uso en mi M16A4, en la que entra sobradamente, debido a su poco peso y su capacidad la hacen ser una de mis favoritas. Vienen Matcheadas y el balanceo es perfecto.

nice lipofor my airsoftgun
Genial bateria ya he comprado 4 y ninguna me ha fallado, cabe perfectamente en mi crane stock marca Dboys.
View all reviews
Upload video

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!


essential items and

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.