Turnigy Plush-32 150A (2~6S) Brushless Speed Controller w/BEC (Rev1.1.0)
Turnigy Plush-32 150A (2~6S) Brushless Speed Controller w/BEC (Rev1.1.0)
Copy and Share the Below URL
Accessories
Special Price $9.89
You save $1.10
Was $10.99
Special Price $4.28
You save $0.48
Was $4.76
The Turnigy Plush-32 brushless ESC comes with a 32-bit ARM controller which offers higher resolution, makes it quicker, smoother, and more responsive to your throttle inputs. As you would expect, all the Turnigy Plush-32 are manufactured to the same high-quality standards that you have come to expect with all the Turnigy Plush ESCs.
Now with the updated Rev1.1.0 firmware, these speed controllers offer a few more programming options over previous models. These include motor type, spool-up acceleration, PWM frequency, beacon delay, and an adjustable BEC (this is only available on the 150A). Most of these revisions are self-explanatory but the "Beacon Delay" does require an explanation. The "Beacon Delay" is quite a unique function that will cause the ESC to start "beeping" after a predetermined delay of not using the throttle stick, this can be set via the program card. The loud beeping noise is perfect for finding your model if it gets lost in high grass, standing crops, or in the bush, etc. Please note that you can use your existing Plush 32 programming card but you will not be able to access the revised functions unless you purchase the new Rev1.1.0 programming card.
Programming your Plush 32 ESC is made very simple if you use the Plush 32 programming card. No more listening to the beeps, and guessing when to move your throttle, the programming card changes settings with the press of a button. Easy-to-read LEDs let you know exactly how your ESC is being programmed and set. So don’t forget to include a programming card when purchasing your ESC, see related products.
Programming Options (most require the use of the program card):
Cut-Off Mode: Off/Slow down/Cut-off
Battery Type: LiHv/LiPo/NiMh
Cutoff Voltage: 2.9~3.5V
Number of Cells: 2/3/4/5/6/7/8/9/10/11/12/13/14/auto (depending on amperage of ESC)
Protection Temperature: Off/90/100/110/120/130/140°C (60A and above only)
Advanced Timing: 0/6/12/18/24/30° and auto
Brake: Off/On, can be set from transmitter
Brake Strength: Off/25/50/75/100%
Motor Direction: Normal/reversed
Start-Up Power: 10/20/25/30/35/40/45%
Auto Rotation Restart Time: Off/10/20/30/40/60S
Motor Type: Normal/Disc Type/EDF
BEC Voltage: 5/5.5/6/7.4/8V (150A version only)
Spool-Up/Acceleration: L1/L2/L3/L4/L5/L6/L7
PWM Output Frequency Range: 8/12/16/24/32KHz
Beacon Delay: Off/1/2/3/4/5/10mins
Features:
• 32-bit ARM MCU, compact design, and lightweight
• Revised V1.1.01 version offers even more programming options
• High resolution makes it quicker, smoother, and more responsive to throttle inputs
• Includes synchronous rectification and regenerative braking
• Automatically detects an input signal
• Customized settings can be done using the Plush 32 program card
• 60A and above supports adjustable temperature protection, 150A offers adjustable BEC
Specs:
Type: Turnigy Plush-32 150A (2~6S) Brushless Speed Controller w/BEC
Continuous Amps: 150A
No of Cells: 2~6S
Max Voltage: 8.4~25.2V
BEC Output: 5.5V@5A (adjustable on the 150A version only)
BEC type: SBEC
Receiver Connection: Standard JR type
Size: 50.5x31.5x25mm
Weight: 93g
Required:
Battery and motor connections of your choice (see related products)
Note: A copy of the specifications sheet is available under the "Files" tab.
Ribbs | Verified Buyer
-
Overall
-
Quality
-
Value
Dead on arrival -
Apr 29, 2022
diiity | Verified Buyer
-
Overall
-
Quality
-
Value
boof
Nov 09, 2021
whirrwolf | Verified Buyer
-
Overall
-
Quality
-
Value
????
Oct 10, 2021
Ingo | Verified Buyer
-
Overall
-
Quality
-
Value
Not recommended
Sep 01, 2021
Ned | Verified Buyer
-
Overall
-
Quality
-
Value
Good ESC
Jul 28, 2021
Jason | Verified Buyer
-
Overall
-
Quality
-
Value
very much programming options
Jul 07, 2021
Turnigy Plush-32 (Rev1.1.0) User Manual and Specs | Download [5] |
Turnigy Plush-32 (Rev1.1.0) Program Card User Manual | Download [553] |
Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!